Includes Engine Dynafocal Suspension Mounts; Engine Cowling Mounts; Engine Mounted Control Assemblies; Pneumatic Starters; Push-Pull Control Assemblies;Specially designed Jet Engine Air, Oil, Anti-icing and Hydraulic Regulators; Valves and Pumps; Starting Units.
Excludes Exhaust System; (FSC 1560); Jet Engine Hydraulic Reservoirs (FSC 2840); Jet Engine Oil Tanks (FSC 2840); Electrical Starters (FSC 2925); Cockpit Mounted Control Quadrants (FSC 1680); Aircraft Engine Covers (FSC 1730).
Note-Unless specifically excluded, engine accessories for all vehicles, such as aircraft, motor vehicles, ships, tractors, and construction vehicles, as well as accessories for stationary engines, are classified in this Group.
Additional Information for Miscellaneous Engine Accessories, Aircraft
NATO Supply Class 2995 is a classification for Miscellaneous Engine Accessories, Aircraft. It falls under NATO Supply Group 29, which is specifically for Engine Accessories.
This supply class includes various accessories that are used in aircraft engines but do not fall under any specific sub-classification within the group. These accessories are essential for the proper functioning and maintenance of aircraft engines.
Some examples of miscellaneous engine accessories in this supply class may include:
1. Engine mounts: These are structural components that secure the engine to the aircraft and absorb vibrations.
2. Engine cowling: This is the outer covering of the engine, designed to streamline airflow and protect the engine components.
3. Engine starters: These are devices used to initiate the engine's operation, typically through the use of an electric motor or compressed air.
4. Engine fuel controls: These are systems or components that regulate the flow of fuel to the engine, ensuring proper fuel-air mixture for combustion.
5. Engine ignition systems: These systems provide the necessary spark or heat to ignite the fuel-air mixture in the engine cylinders.
6. Engine cooling systems: These systems help regulate the temperature of the engine by dissipating heat generated during operation.
7. Engine lubrication systems: These systems ensure proper lubrication of engine components to reduce friction and wear.
8. Engine filters: These are used to remove contaminants from the engine oil, fuel, or air before they enter the engine.
It's important to note that this is just a general overview of the NATO Supply Class 2995 for Miscellaneous Engine Accessories, Aircraft. The specific items and components included in this class may vary depending on the NATO member country and their specific requirements.
If you need more detailed information or have specific questions about a particular accessory or component, please let me know, and I'll be happy to assist you further.
NSN by Country
Frequently Asked Questions(FAQ) for Federal Supply Class 2995
- What is Federal Supply Class 2995?
- FSC 2995 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 2995) in the USA for supply items codified in the category of Miscellaneous Engine Accessories, Aircraft.
- What is NATO Supply Classification Class 2995?
- NSC 2995 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 2995 in the USA) for supply items codified in the category of Miscellaneous Engine Accessories, Aircraft.
- Which Federal Supply Group is FSC 2995 in?
- FSC 2995 is in Federal Supply Group(FSG) 29 which contains .
- Which NATO Supply Classification Group is NSC 2995 in?
- NSC 2995 is in NATO Supply Classification Group(NSG) 29 which contains .
Supply Items Included in Federal Supply Class 2995
- Governor,Gasoline Engine 16 Items
- What is a Push-Pull Control Assembly? 255 Items
- A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
- What is a Dirt And Liquid Deflector? 83 Items
- A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
- What is an Air Turbine Engine Starter? 205 Items
- An Air Turbine Engine Starter (STARTER,ENGINE,AIR TURBINE) is an item designed to accelerate turbojet and turboprop engines from rest to starter cutoff speed by means of an air driven turbine.
- What is a Gas Turbine Engine Starter? 123 Items
- A Gas Turbine Engine Starter (STARTER,ENGINE,GAS TURBINE) is an item designed to accelerate a gas turbine engine from rest to starter cutoff speed by means of a combustion gas driven turbine and reduction gear assembly constructed to be mounted on the engine starter drive. The combustion gas is generated from ignited liquid fuel and air in the combustion chamber or from a solid propellant cartridge attached to the combustion chamber of the starter. May have provision for energizing the turbine by low pressure air from engine bleed or ground equipment air supply.
- What is an Aircraft Fluid Manifold? 336 Items
- An Aircraft Fluid Manifold (MANIFOLD,FLUID,AIRCRAFT) is an enclosure with three (3) or more openings designed for use in aircraft de-icing, fuel, hydraulic, oil, pneumatic, and vacuum systems to collect and/or distribute fluids. It may contain valves or metering devices and the like. Excludes MANIFOLD, AIRCRAFT INSTRUMENTS.
- What is an Engine Starter Unit? 49 Items
- An Engine Starter Unit (STARTER UNIT,ENGINE) is a manually pushed or towed unit designed to provide electric power for starting aircraft or vehicle engines. It is wheel mounted and may have handles for portability. It has one or more batteries and may or may not include a battery charger. If the battery charger is included, it may be used either to charge the batteries in the unit or in the aircraft/vehicle. Excludes STARTER,ENGINE,ELECTRICAL; and STARTER,ENGINE,GASOLINE.
- What is a Metallic Particle Detector? 260 Items
- A Metallic Particle Detector (DETECTOR,METALLIC PARTICLE) is a sensing device designed to detect the presence of metallic foreign matter in fuel, hydraulic, or lubricating systems. Detection completes an integral electrical circuit that actuates an external signal and/or actuate the engine to stop.
- Parts Kit,Engine Oil Pump 25 Items
- What is a Valve Cap? 55 Items
- A Valve Cap (CAP,VALVE) is a cap designed to mate with a fluid valve body. It may have an orifice through which a rod, shaft, stem, or an adjusting screw passes. For ported items, see HEAD, VALVE. Excludes CAP, PNEUMATIC VALVE.
- What is a Valve Head? 14 Items
- A Valve Head (HEAD,VALVE) is an item designed to mate with a hydraulic or pneumatic valve body. It must have inlet and/or outlet port(s). For items without ports see CAP (1), VALVE.
- What is a Jet Engine Anti-Icing Valve Assembly? 100 Items
- A Jet Engine Anti-Icing Valve Assembly (VALVE ASSEMBLY,ANTI-ICING,JET ENGINE) is an assembly of items consisting of a shutoff valve, selector valve, a thermal switch, and the like used on aircraft engines, both military and commercial, which are designed for the injection of anti-icing bleed air into the intake of aircraft engines.
- What is an Engine Exhaust System Hanger? 35 Items
- An Engine Exhaust System Hanger (HANGER,ENGINE EXHAUST SYSTEM) is a metal or combination metal and rubber device designed to absorb shock and/or suspend, mufflers, tail pipes and the like. May include items such as u-bolt(s), washers, nuts and the like. Excludes STRAP, RETAINING; and BRACKET (as modified).
- What is an Engine Oil Pump Assembly? 283 Items
- An Engine Oil Pump Assembly (OIL PUMP ASSEMBLY,ENGINE) is a device designed to maintain oil pressure within the moving parts of an internal combustion engine. May contain parts such as shaft, gears, pin, bushing, screen, adjusting screw and the like.
- What is an Engine Oil Pump Assembly Housing? 169 Items
- An Engine Oil Pump Assembly Housing (HOUSING,OIL PUMP ASSEMBLY,ENGINE) is a housing which supports, aligns, and positions internal parts of a OIL PUMP ASSEMBLY, ENGINE. It creates a boundary for close clearance of gears, vanes, or pistons to produce pressure or flow of fluids confined to the parameters of the housing.
- What is an Engine Exhaust System? 109 Items
- An Engine Exhaust System (EXHAUST SYSTEM,ENGINE) is an assembly specifically designed to exhaust and/or to muffle the sound of gases produced by an engine. The item may include mounting hardware and seals.
- What is an Engine Sound Reduction Case Section? 11 Items
- An Engine Sound Reduction Case Section (CASE SECTION,SOUND REDUCTION,ENGINE) is an item of various shapes or design representing a part of a CASE (3), SOUND REDUCTION, ENGINE. It includes fastening, sealing and locking features.
- What is a Starter Air Distributor? 11 Items
- A Starter Air Distributor (AIR DISTRIBUTOR,STARTER) is a cast or pressed item specifically designed to be driven by a shaft and to conduct compressed air for the starting process into the cylinders by means of distribution disk.
- Cover,Intake Manifold 38 Items
- What is an Engine Accessories Modification Kit? 131 Items
- An Engine Accessories Modification Kit (MODIFICATION KIT,ENGINE ACCESSORIES) is an item or group of items employed to modify all engine accessories.
- What is a Control Cable Assembly? 72 Items
- A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
- What is a Power Control Quadrant? 40 Items
- A Power Control Quadrant (QUADRANT,POWER CONTROL) is an item which includes levers, stops, swithches and friction drag for helicopter engine power control.
- What is a Heat Suppressor? 24 Items
- A Heat Suppressor (SUPPRESSOR,HEAT) is a device that surrounds an engine (as modified) for the purpose of blocking heat waves and protects the engine from being detected by infrared devices.
- What is an Engine Starter Cartridge Combustion Chamber? 23 Items
- An Engine Starter Cartridge Combustion Chamber (CHAMBER,COMBUSTION,ENGINE STARTER CARTRIDGE) is an item accommodating a CARTRIDGE, ENGINE STARTER and using the generated combustion gas for the actuation of a STARTER (as modified).
- What is an Engine Monitor? 17 Items
- An Engine Monitor (MONITOR,ENGINE) is an item designed to indicate visually or acoustically, the operating status of an internal combustion engine when reaching critical conditions in terms of lubricating oil pressure, oil mist concentration, operating and bearing temperatures and the like. A speed reduction or operation cutoff device may be included. See also MONITOR, COOLING, WATER.
- What is an Engine Electronic Regulator-Control? 123 Items
- An Engine Electronic Regulator-Control (REGULATOR-CONTROL,ELECTRONIC,ENGINE) is an item designed for electronically regulating and controlling speed governors and volumetric flow regulators, injection pumps, turbochargers, the switching on and off and other operations as a function of engine speed and volumetric efficiency of the cylinders. Excludes GOVERNOR (1), DIESEL ENGINE and GOVERNOR (1), GASOLINE ENGINE.
- What is an Engine Regulator-Control Housing? 59 Items
- An Engine Regulator-Control Housing (HOUSING,REGULATOR-CONTROL,ENGINE) is a housing designed to accommodate and support component parts of a REGULATOR-CONTROL, ELECTRONIC, ENGINE.
- What is an Engine Oil Pump Assembly Housing Section? 49 Items
- An Engine Oil Pump Assembly Housing Section (HOUSING SECTION,OIL PUMP ASSEMBLY,ENGINE) is a rigid item of different forms, which together with at least one further housing section forms a HOUSING (2), OIL PUMP ASSEMBLY, ENGINE.
- What is a Turbine Engine Supervisory Control Unit? 344 Items
- A Turbine Engine Supervisory Control Unit (CONTROL UNIT,SUPERVISORY,TURBINE ENGINE) is an electronic unit that continously monitors engine speed, temperature, and air flow and adjusts the FUEL CONTROL, MAIN, TURBINE ENGINE to compensate for changes. Features may include load sharing capabilities, rotor speed governing, loss-of-load protection and analog or manual backup modes. It may contain automatic start capability or self-diagnostic circuitry.
- What is a Separator Particle Blower? 11 Items
- A Separator Particle Blower (BLOWER,PARTICLE,SEPARATOR) is an item consisting primarily of a housing, impeller, shroud, and drive shaft or the like. It is an integral part of a SEPARATOR, PARTICLE, AIR and designed to draw and discharge particles from the inlet air flow to provide clean air to the turbine engine compressor assembly. IT is usually driven off of the GEARBOX, ACCESSORY DRIVE, TURBINE ENGINE.
- What is a Gas Turbine Engine History Recorder? 20 Items
- A Gas Turbine Engine History Recorder (RECORDER,HISTORY,GAS TURBINE ENGINE) is an instrument with multiple readouts designed to count and display the actual number of times engine parts experience mechanical and high thermal stress, engine interturbine gas temperatures in relation to time elapsed and actual engine operating hours. Counts are accumulated at various percentages of operating power. These readouts cannot be reset to zero.
- What is a Thermocouple Harness Assembly? 33 Items
- A Thermocouple Harness Assembly is a device designed to accommodate the attachment of two or more sensors mounted around the circumference of the turbine engine exhaust, which measures the turbine outlet temperature.
- What is an Aircraft Engine Governor Diaphragm? 45 Items
- An Aircraft Engine Governor Diaphragm (DIAPHRAGM,GOVERNOR,ENGINE,AIRCRAFT) is an item in the form of a thin sheet, film or membrane, made of metallic or non metallic material, which is mounted on an aircraft between the two halves of a housing. It is fixed at the edge to form an airtight seal.
- What is an Aircraft Engine Tube Assembly? 307 Items
- An Aircraft Engine Tube Assembly (TUBE ASSEMBLY,AIRCRAFT ENGINE) is an aircraft engine component designed to convey fluid. It may be bent or straight, flexible or rigid. It may include fittings to join one or more tubes together. For tube assembly designed to convey fuel from the cell or tank to the engine, see: FUEL LINE,AIRCRAFT.
- What is an Engine Starter Supervisory Control Unit? 34 Items
- An Engine Starter Supervisory Control Unit (CONTROL UNIT,SUPERVISORY,ENGINE STARTER) is an item used to start and stop all engines individually or simultaneously either by manual or automatic mode utilizing the CONTROL UNIT, SUPERVISORY, TURBINE ENGINE of all engines. Also regulates the aircraft mounted accessory drive and air turbine starter during engine starts.
- What is an Engine Power Takeoff? 21 Items
- An Engine Power Takeoff (POWER TAKEOFF,ENGINE) is a mechanical device designed to be secured to an internal combustion engine and used to transmit the rotary motion of the crankshaft to auxiliary equipment, such as generators, cranes, pumps, compressors, mixers, and the like. Includes a power output shaft and a clutch which may be controlled by a hand lever or a hydraulic or air cylinder. May include pulley(s), flange, yoke or reduction gear unit. Excludes vehicular clutches and POWER TAKEOFF, TRANSMISSION.
- What is an Air Engine Starter? 50 Items
- An Air Engine Starter (STARTER,ENGINE,AIR) is an item consisting of an air motor and integral and associated components primarily designed to crank an internal combustion engine until it starts operating under its own power. It may include facilities for manual or mechanical activation.
- What is an Engine Accessories Installation Kit? 24 Items
- An Engine Accessories Installation Kit (INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
Stock Items From Supply Class 2995 Page 1of 81
- 5105T42P01
- RNCC: 3 | RNVC: 2 | DAC: 5
- D65.320.00.4
- RNCC: 3 | RNVC: 2 | DAC: 2
- 5105T41P01
- RNCC: 3 | RNVC: 2 | DAC: 1
- 5104T94P04
- RNCC: 3 | RNVC: 2 | DAC: 5
- (241)ADA61UCSTX-C-2B
- RNCC: 5 | RNVC: 2 | DAC: U
- 5793606-04 FIND 001D4
- RNCC: 5 | RNVC: 2 | DAC: 6
- UPA45025-1
- RNCC: 3 | RNVC: 2 | DAC: 5
- 325-526-429-0
- RNCC: 3 | RNVC: 2 | DAC: 4
- NO PRIMARY REF 99-640-2440
- RNCC: 3 | RNVC: 2 | DAC: 9
- RU19324A
- RNCC: 3 | RNVC: 2 | DAC: 2