2940-15-139-7671

5340-20-003-4022 5340200034022 200034022 is a narrow strip of webbing cut to a definite length, having one or both ends processed. it is usually designed for, and may have, one or more attachments or fasteners, such as buckle; loop, strap fastener; strap end clip; ring, dee; hook; and the like. excludes strap, berth, mattress retaining; strap, chin; safety straps; and webbing, textile. do not use if a more specific item name applies.

3040-33-003-4022 3040330034022 330034022 is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). the other hole(s) connect(s) to connecting link, rigid; wire rope assembly, single leg; or clevis, rod end; to provide transmission of movement to other parts of the mechanism. see also bell crank. for manually operated items see lever, manual control.

4320-15-003-4022 4320150034022 150034022 is a positive displacement device which utilizes the reciprocating motion of one or more pistons, plungers, or diaphragms within a complete or partial enclosure as a means of transferring a liquid from one place to another. it is designed to be driven manually or by a prime mover which is not an integral part of the pump.

5306-00-003-4022 5306000034022 000034022 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.

DAC: 1 8 Sep 1999 2510-15-139-7736 Leva Reazione 1000059RNCC: 3 | RNVC: 2 | DAC: 5 10 Oct 1996 2940-15-139-7671