2940-14-420-6366
Air Cleaner Intake Pipe Cap
2940144206366 144206366 5710-51 5710-00-005 571051 1169083
A cap that shields the air cleaner intake pipe from rain, snow, and large particles of foreign matter such as twigs, hay, straw, and the like. It also confines the oil spray from the oil bath air cleaner when the engine backfires or rollback occurs. View more Air Cleaner Intake Pipe Cap
Managed by France
NSN Created on 16 Dec 1987
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 2940-14-420-6366
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 2940-14-420-6366 5+ Documents (More...)
https//www.nsnlookup.com /nato/nato-stock-numbers/inc Air Cleaner Intake Pipe Cap (INC 33640) 2940-14-420-6366
4330-01-344-4446 4330013444446 013444446 is a filter having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. for spin-on, base-mounted filtering devices with integral outer casings, see filter element, fluid. excludes air conditioner.
2940-12-367-6674 Air Cleaner Intake Pipe Cap 40036700RNCC: 3 | RNVC: 2 | DAC: 1 21 Sep 2005 2940-14-420-6366
2940-01-342-6097 2940013426097 013426097 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.
5310-33-116-9083 5310331169083 331169083 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 2940-14-420-6366
End Users 2940-14-420-6366
- France (ZF)
Approved Sources 2940-14-420-6366
- Part Number
- Manufacturer
- Status
- 5710-51
- Manufacturer
- F4242 - Sp Defense (Active)
- Primary Buy
- Primary Buy
- 5710-00-005
- F4242 - Sp Defense (Active)
- Secondary Buy
- Secondary Buy
- 571051
- F4242 - Sp Defense (Active)
- Secondary Buy
- Secondary Buy
- 1169083
- F7060 - Brimont S A (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
NATO Stock Numbers Related to 2940-14-420-6366
2940-12-334-7438 2940-14-555-6591 2940-34-038-6241 2940-13-114-6659 2940-41-000-7268 2940-13-114-7346 2940-17-105-4739 2940-14-512-0305 2940-01-273-7618 2940-01-582-3992 2940-01-198-1231 2940-01-535-9667 2940-01-673-5199 2940-00-424-7761 2940-01-562-5774 2940-01-568-6025 4310-01-165-6796 2990-21-877-2063