2930-00-325-3713

7892 Engine Cooling System Water Pump Impeller 5140935RNCC: 3 | RNVC: 2 | DAC: 1 17 Apr 1970 2930-00-325-3713

2010-14-434-1681 2010144341681 144341681 is a tubular part installed over the periphery of ship's main propulsion shafts which are exposed to salt water, i.e., propeller shafts intermediate shafts and stern tube shafts, in order to provide a bearing surface in way of water-lubricated stern tube and strut bearings.

5365-01-434-1681 5365014341681 014341681 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

3110-99-434-1681 3110994341681 994341681

6145-00-434-1681 6145004341681 004341681 is two or more insulated conductors (solid or stranded) contained in a common covering, or two or more insulated conductors twisted or molded together without a common covering, or one insulated conductor with a metallic covering, covering, shield, or outer conductor. the rated working voltage of the item must be 300 volts or more, or in lieu of this the test voltage must be 1,000 volts or more; and the size of each individual conductor must be number 18 american wire gage (0.75 square millimeters) or larger. for cables with uninsulated neutral conductor use the hightest rated voltage. refers to bulk quantities only, for items of definite length with processed ends or terminated in fittings, see cable assembly, power, electrical. for low voltage aircraft and automotive cable, see cable, special purpose, electrical.