2930-21-003-8173
Flat Washer
2930210038173 210038173
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2024
1
Marketplace 2930-21-003-8173
Request a Quotation from participating marketplace vendors
Related Documents 2930-21-003-8173 5+ Documents (More...)
Nonaircraft from Canada (CA) Cooling System Pump 2930-21-003-8178 Compression Helical Spring 2930-21-003-8173
Components, Nonaircraft (FSC 2930) Cooling System Pump 2930-21-003-8178 Compression Helical Spring 2930-21-003-8173
Engine Cooling System Components, Nonaircraft (FSC 2930) -21-003-8178 Compression Helical Spring 2930-21-003-8173
Cooling System Components, Nonaircraft from Canada (CA) -21-003-8178 Compression Helical Spring 2930-21-003-8173