Premium Information is available for this item - Upgrade for $1 a day
2920-00-936-8247
Engine Accessory Generator
2920009368247 009368247 721G1 7101 GJT7101SN
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT. View more Engine Accessory Generator
May 2023
6
Marketplace 2920-00-936-8247
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 2920-00-936-8247 5+ Documents (More...)
,ENGINE ACCESSORY 15 EA NS Request Quotation Subscribe to View Vendor Details... 7101 GENERATOR,ENGINE
99 EA NS Request Quotation Subscribe to View Vendor Details... 7101 GENERATOR,ENGINE ACCESSORY 2 EA
Cage Code 721G1 and is tracked by Dun & Bradstreet under DUNS Number 033722677.
What is CAGE Code 721G1?
-71-01 -18 7101-71-01.18 E7101-71-01-18 E7101-71-01.18 A preformed item having high electrical resistance
NT8921601 D4276 - Continental Automotive Technologies (Active) Secondary Buy RNCC 5 RNVC 2 DAC 1 7101
Restrictions 2920-00-936-8247
2920-00-936-8247 is a Engine Accessory Generator that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 2920-00-936-8247
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2920-00-936-8247
- US Air Force (FUGC)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FUAX
- US Navy (N9BC)
- Effective Date:
- 1 Sep 2005
- Supplementary Collaborators:
- HD
Approved Sources 2920-00-936-8247
- Part Number
- Manufacturer
- Status
- 7101
- Manufacturer
- 556A6 - Linde Material Handling North (Active)
- Primary Buy
- Primary Buy
- GJT7101SN
- 24975 - Prestolite Electric Inc (Active)
- Primary Buy
- Primary Buy
- 721G1
- 556A6 - Linde Material Handling North (Active)
- Secondary Buy
- Secondary Buy
- 7101
- 05415 - Linde Lift Truck Corp. (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 721G1
- 05415 - Linde Lift Truck Corp. (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- GJT7101SN
- 68505 - Prestolite Electric Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 2920-00-936-8247
- Characteristic
- Specifications
- FIIG
- Specifications
- A14700
- Distance From End To Keyway Center [ANTX]
- 0.766 Inches Nominal
- Angular Deviation Of First Hole From Top Center In Deg [BCMB]
- 180.0
- Angular Deviation Of Second Hole From First Hole In Deg [BCMC]
- 163.0
- Armature Minimum Speed In Rpm At Full Current Output [BCGD]
- 2500
- Bottom Mounting Hole Diameter [BCMH]
- 0.323 Inches Minimum And 0.333 Inches Maximum
- Distance Between Inside Surfaces Of Hinge Bracket [BCMD]
- 6.118 Inches Minimum And 6.131 Inches Maximum
- Distance Between Outside Surfaces Of Hinge Bracket [BCMF]
- 6.998 Inches Minimum And 7.011 Inches Maximum
- Distance Between Shaft Center And Bottom Mounting Hole Center [BCLY]
- 3.380 Inches Nominal
- Distance Between Shaft Center And Top Mounting Hole Center [BCLZ]
- 3.190 Inches Nominal
- Furnished Items [ABFF]
- Lockwasher And Nut And Woodruff Key
- Fsc Application Data [ZZZV]
- Engine Electrical System,Nonaircraft
- Ground Polarity Type [AXHX]
- Negative
- Grounding Method [BCGN]
- Internal
- Maximum Rated Armature Speed In Rpm [BCND]
- 8000
- Minimum Current Cut-In Speed In Rpm [BCGG]
- 1100
- Mounting Hole Thread Diameter [CMLL]
- 1.312 Inches Nominal
- Mounting Hole Thread Direction [ACJC]
- Right-Hand
- Mounting Hole Thread Class [CMLN]
- 2B
- Mounting Hole Thread Quantity Per Inch [CMLM]
- 18
- Mounting Hole Thread Series Designator [CMLK]
- Unc
- Mounting Style [ADER]
- Bracket Mtd W/Three Mtg Holes, Top Hole Threaded
- Maximum Output Current Rating In Amps [BCGF]
- 25.0
- Keyway Width [ABRR]
- 0.125 Inches Nominal
- Keyway Length [AFYS]
- 0.625 Inches Nominal
- Second Step Diameter [ABPT]
- 0.6684 Inches Minimum And 0.669 Inches Maximum
- Shaft Drive End Style [BCGS]
- Straight Shaft End, Threaded, W/Keyway
- Shaft Rotation Direction [AKCT]
- Clockwise
- Unthreaded Portion Length [ABVA]
- 0.710 Inches Nominal
- Voltage In Volts [ELEC]
- 12.0
- Submersibility [AHZV]
- Nonsubmersible
- Thread Class [CFHL]
- 2A
- Thread Diameter [AWDP]
- 0.669 Inches Nominal
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.375 Inches Nominal
- Thread Series [BZRR]
- Uns
- Thread Quantity Per Inch [CMLP]
- 20
DLA Procurement Analysis 2920-00-936-8247
Management Data 2920-00-936-8247
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 2920-00-936-8247
Freight Information 2920-00-936-8247
2920-00-936-8247 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 2920-00-936-8247 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 2920-00-936-8247 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 2920-00-936-8247 is not classified as a special type of cargo when transported by water. 2920-00-936-8247 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 2920-00-936-8247
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 2920-00-936-8247 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: