Premium Information is available for this item - Upgrade for $1 a day
2920-00-782-4156
Engine Accessory Generator
2920007824156 007824156 11613630 XA3458C4
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT. View more Engine Accessory Generator
January 2023
10
Marketplace 2920-00-782-4156
Request a Quotation from participating marketplace vendors
Restrictions 2920-00-782-4156
2920-00-782-4156 is a Engine Accessory Generator that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 2920-00-782-4156
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2920-00-782-4156
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Nov 1995
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
Approved Sources 2920-00-782-4156
- Part Number
- Manufacturer
- Status
- 11613630
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- XA3458C4
- 24975 - Prestolite Electric Inc (Active)
- Secondary Buy
- Secondary Buy
- XA3458C4
- 35510 - Prestolite Electric Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 2920-00-782-4156
- Characteristic
- Specifications
- FIIG
- Specifications
- A14700
- Distance From End To Keyway Center [ANTX]
- 1.405 Inches Nominal
- Angular Deviation Of First Hole From Top Center In Deg [BCMB]
- 0.0
- Angular Deviation Of Second Hole From First Hole In Deg [BCMC]
- 0.00.0
- Armature Minimum Speed In Rpm At Full Current Output [BCGD]
- 5000
- Bottom Mounting Hole Diameter [BCMH]
- 0.627 Inches Minimum And 0.630 Inches Maximum
- Distance Between Inside Surfaces Of Hinge Bracket [BCMD]
- 6.631 Inches Minimum And 6.644 Inches Maximum
- Distance Between Outside Surfaces Of Hinge Bracket [BCMF]
- 8.131 Inches Minimum And 8.144 Inches Maximum
- Distance Between Shaft Center And Bottom Mounting Hole Center [BCLY]
- 4.430 Inches Minimum And 4.440 Inches Maximum
- Distance Between Shaft Center And Top Mounting Hole Center [BCLZ]
- 4.430 Inches Minimum And 4.440 Inches Maximum
- Environmental Protection [ADZC]
- Corrosion Resistant And Fungus Resistant
- Ground Polarity Type [AXHX]
- Negative
- Grounding Method [BCGN]
- Internal
- Maximum Rated Armature Speed In Rpm [BCND]
- 50000
- Minimum Current Cut-In Speed In Rpm [BCGG]
- 1500
- Mounting Hole Thread Direction [ACJC]
- Right-Hand
- Mounting Hole Thread Class [CMLN]
- 2B
- Mounting Hole Thread Diameter [CMLL]
- 0.625 Inches Nominal
- Mounting Hole Thread Quantity Per Inch [CMLM]
- 18
- Mounting Hole Thread Series Designator [CMLK]
- Unf
- Mounting Style [ADER]
- Bracket Mtd W/Three Mtg Holes, Top Hole Threaded
- Maximum Output Current Rating In Amps [BCGF]
- 80.0
- Keyway Length [AFYS]
- 0.750 Inches Nominal
- Keyway Width [ABRR]
- 0.156 Inches Nominal
- Rectifier Location [BCGM]
- Integral
- Second Step Diameter [ABPT]
- 0.7794 Inches Minimum And 0.780 Inches Maximum
- Shaft Drive End Style [BCGS]
- Straight Shaft End, Threaded, W/Keyway
- Shaft Rotation Direction [AKCT]
- Counterclockwise
- Unthreaded Portion Length [ABVA]
- 1.220 Inches Minimum And 1.245 Inches Maximum
- Voltage In Volts [ELEC]
- 28.0
- Submersibility [AHZV]
- Submersible
- Thread Class [CFHL]
- 2A
- Thread Diameter [AWDP]
- 0.750 Inches Nominal
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.750 Inches Nominal
- Thread Series [BZRR]
- Unf
- Thread Quantity Per Inch [CMLP]
- 16
NATO Stock Numbers Related to 2920-00-782-4156
Freight Information 2920-00-782-4156
2920-00-782-4156 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 2920-00-782-4156 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 2920-00-782-4156 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 590 for ocean manifesting and military sealift. 2920-00-782-4156 is not classified as a special type of cargo when transported by water. 2920-00-782-4156 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.