Premium Information is available for this item - Upgrade for $1 a day
2920-00-718-1749
Engine Accessory Generator
2920007181749 007181749 1105986 1105996
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT. View more Engine Accessory Generator
January 2023
15
Marketplace 2920-00-718-1749
Request a Quotation from participating marketplace vendors
Related Documents 2920-00-718-1749 2+ Documents (More...)
Every Day 2920-00-718-1749 RQST NE Updated Every Day 2920-00-718-1749 RQST Updated Every Day 2920-00
/fsg-29/fsc-2920/us 2920-00-718-1749 Engine Accessory Generator 2920007181749 11059861105996 A generator
1105986-2 A straight, one-piece fitting used to join a tube or tube fitting to another tube or tube
Every Day 4730-25-139-8767 RQST NE Restrictions https//www.nsnlookup.com /fsg-29/fsc-2920/us 2920-00-718-1749
Restrictions 2920-00-718-1749
2920-00-718-1749 is a Engine Accessory Generator that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 2920-00-718-1749
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2920-00-718-1749
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 2920-00-718-1749
- Part Number
- Manufacturer
- Status
- 1105996
- Manufacturer
- 16764 - General Motors Corp Delco Remy Div (Replaced)
- Original Design
- Original Design
- 1105996
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 1105996
- 61928 - General Motors Corp Ac-Delco Div (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 1105986
- 16764 - General Motors Corp Delco Remy Div (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 1105986
- 1LW55 - Borgwarner Pds (Anderson), L.L.C. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 2920-00-718-1749
- Characteristic
- Specifications
- FIIG
- Specifications
- A14700
- Distance From End To Keyway Center [ANTX]
- 1.125 Inches Nominal
- Angular Deviation Of First Hole From Top Center In Deg [BCMB]
- 193.0
- Angular Deviation Of Second Hole From First Hole In Deg [BCMC]
- 159.0
- Armature Minimum Speed In Rpm At Full Current Output [BCGD]
- 1900
- Bottom Mounting Hole Diameter [BCMH]
- 0.453 Inches Nominal
- Distance Between Inside Surfaces Of Hinge Bracket [BCMD]
- 7.243 Inches Minimum And 7.257 Inches Maximum
- Distance Between Outside Surfaces Of Hinge Bracket [BCMF]
- 8.140 Inches Nominal
- Distance Between Shaft Center And Bottom Mounting Hole Center [BCLY]
- 3.875 Inches Nominal
- Distance Between Shaft Center And Top Mounting Hole Center [BCLZ]
- 3.500 Inches Nominal
- Furnished Items [ABFF]
- Radio Interference Shielding And Woodruff Key
- Environmental Protection [ADZC]
- Corrosion Resistant And Fungus Resistant
- Ground Polarity Type [AXHX]
- Negative Or Positive
- Grounding Method [BCGN]
- External
- Maximum Rated Armature Speed In Rpm [BCND]
- 8000
- Minimum Current Cut-In Speed In Rpm [BCGG]
- 1800
- Mounting Hole Thread Direction [ACJC]
- Right-Hand
- Mounting Hole Thread Class [CMLN]
- 2B
- Mounting Hole Thread Diameter [CMLL]
- 0.375 Inches Nominal
- Mounting Hole Thread Quantity Per Inch [CMLM]
- 16
- Mounting Hole Thread Series Designator [CMLK]
- Unc
- Mounting Style [ADER]
- Bracket Mtd W/Three Mtg Holes, Top Hole Threaded
- Maximum Output Current Rating In Amps [BCGF]
- 18.0
- Keyway Length [AFYS]
- 0.625 Inches Nominal
- Keyway Width [ABRR]
- 0.125 Inches Nominal
- Second Step Diameter [ABPT]
- 0.668 Inches Minimum And 0.669 Inches Maximum
- Shaft Drive End Style [BCGS]
- Straight Shaft End, Threaded, W/Keyway
- Shaft Rotation Direction [AKCT]
- Clockwise
- Unthreaded Portion Length [ABVA]
- 1.300 Inches Nominal
- Voltage In Volts [ELEC]
- 24.0
- Submersibility [AHZV]
- Nonsubmersible
- Thread Class [CFHL]
- 2A
- Thread Diameter [AWDP]
- 0.669 Inches Nominal
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.500 Inches Nominal
- Thread Series [BZRR]
- Uns
- Thread Quantity Per Inch [CMLP]
- 20
Similar Supply Items to 2920-00-718-1749
Freight Information 2920-00-718-1749
2920-00-718-1749 has freight characteristics.. 2920-00-718-1749 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Packaging Data 2920-00-718-1749
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement