2920-00-284-1376

RNVC: 9 | DAC: X 1 Jan 1963 5330-00-298-0794 Gasket 50651RNCC: 5 | RNVC: 9 | DAC: X 1 Jan 1963 2920-00-284-1376

X 1 Jan 1963 5330-00-298-0663 Plain Encased Seal 7A4511RNCC: 5 | RNVC: 9 | DAC: 5 1 Jan 1963 2920-00-284-1376

5915-01-186-5111 5915011865111 011865111 is an item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). excludes a single inductance, or a single capacitance, or a single resistance. see coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

4730-22-618-4228 4730226184228 226184228 is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a bolt, fluid passage on one end. the other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. the fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. for self-sealing fittings with an external or internal threaded disconnect end, see coupling half, self-sealing. see also, connector, multiple, fluid pressure line.

5365-01-618-4228 5365016184228 016184228 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.