2920-32-020-3977

. excludes screw, shoulder; and screw, machine. https//www.nsnlookup.com /fsg-29/fsc-2920/sg 2920-32-020-3977
Lanyard Assembly 2920320203977 320203977 2920-32-020-3977 2920320203977 320203977 LANYARD ASSEMBLY

May 1979 2920-32-074-4940 Bran Harness Wiring 2000124809RNCC: 3 | RNVC: 2 | DAC: 6 9 Mar 2000 2920-32-020-3977

2920-32-075-8624 2920320758624 320758624 is a generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. may also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. includes alternating current generators designed for use with a rectifier. excludes the major generator of "generating sets". for generators specifically designed for aircraft use and not mounted on the engine, see generator, direct current.

4720-14-479-2806 4720144792806 144792806 is a flexible, tubular item of light wall construction. it must have single or multiple layers of nonmetallic material, but may contain metal wire reinforcement, foil type liner, and/or woven or braided cover. it is designed to convey under low pressure gaseous material, such as air and fumes, and light weight solid materials, such as dust, powders, and fibers. for items with couplings, see hose assembly, air duct. for items of sleeve section design rated for high pressure use, see sleeve, seal, coupling. excludes hose, nonmetallic.

5310-14-273-4769 5310142734769 142734769 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)