2920-15-144-3105

www.nsnlookup.com /fsg-29/fsc-2920 Engine Electrical System Components, Nonaircraft from Italy (IT) Oct 1996 2920-15-144-3105

5310-21-896-2211 5310218962211 218962211 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

: 1 30 Dec 2008 2920-15-125-0601 Staccabatteria 11180-1RNCC: 3 | RNVC: 2 | DAC: 5 8 Oct 1996 2920-15-144-3105

4920-00-896-2211 4920008962211 008962211 POWER SUPPLY