2920-15-129-2501

designed for other than electrical applications. https//www.nsnlookup.com /fsg-29/fsc-2920/it 2920-15-129-2501
Intermittore 2920151292501 151292501,4212976 2920-15-129-2501 2920151292501 151292501 INTERMITTORE

5950-00-421-2976 5950004212976 004212976 is a transformer consisting of one or more primary winding(s) and one or more secondary winding(s). it may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. for transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. excludes transformer (1), pulse.

5365-14-421-2976 5365144212976 144212976 is a trunicated cone-shaped metal item generally tapered along its entire peripheral length, with a centrally located hole. it may be split (cut) through the material parallel to the axis.

5935-99-421-2976 5935994212976 994212976 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.

5310-14-230-9070 5310142309070 142309070 is a washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces