2920-12-123-1247

Documents 6110-01-380-0653 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-29/fsc-2920/de 2920-12-123-1247
Platte 2920121231247 121231247,2001036000 Documents 2920-12-123-1247 5+ Documents ( More... ) https

Documents 2930-14-215-6675 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-29/fsc-2920/de 2920-12-123-1247
Platte 2920121231247 121231247,2001036000 https//www.nsnlookup.com /cage Thomson/Houston Hotchkiss

5999-14-380-0653 5999143800653 143800653 is an item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. it isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. it includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. it may also afford protection from shock or vibration. it may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. for items whose function is electrical insulation only, see insulator, (as modified). excludes holder, (as modified); retainer, (as modified), and spacer, plate.

5306-12-380-0653 5306123800653 123800653 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.

1020-00-380-0653 1020003800653 003800653 ARM AND CORK ASSEMB