2915-00-628-9777

2530-34-040-5829 2530340405829 340405829 is a component part of a pivoting wheel spindle, one end attaches to the spindle, the other end by means of either a ball stud or pin attaches to the tie rod, steering. see also arm, steering gear.

1005-34-037-5829 1005340375829 340375829 CHARGER (AC)

4730-34-041-5829 4730340415829 340415829 is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. it is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. see also coupling, tube and nipple, tube.

5340-34-030-5829 5340340305829 340305829 is a metallic or nonmetallic item which is rigid, flat and generally smooth. its thickness is small in comparison to its length and width. it is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. see support, as modified. do not use if a more specific name applies.

5365-34-038-5829 5365340385829 340385829 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.