2915-00-352-3810

5962-01-265-1024 5962012651024 012651024 is a microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. these states are commonly referred to as on and off, true and false, high and low, or "1" and "0".

5310-00-265-1024 5310002651024 002651024 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5935-14-265-1024 5935142651024 142651024 is an electrical fitting with a female contact arranged for the insertion of a plug, tip or a tip, test prod. it has a single facility for attachment of a conductor or facility for circuit connection through its mounting provisions. the item may or may not be insulated. excludes multisection types each section of which consists of a single contact spring or telephone-type jack. excludes connector, receptacle electrical; jack, telephone; jack assembly, tip; and post, binding.