Premium Information is available for this item - Upgrade for $1 a day
2910-01-566-5636
Fuel Injection Nozzle Cooling Sleeve
2910015665636 015665636 1841095C1
An item designed to dissipate heat from a fuel injection nozzle. It may be provided with cooling fins or ribs and may be connected to the cooling system of an internal combustion engine. View more Fuel Injection Nozzle Cooling Sleeve
November 2023
9
Marketplace 2910-01-566-5636
Request a Quotation from participating marketplace vendors
Related Documents 2910-01-566-5636 1+ Documents (More...)
Restrictions 2910-01-566-5636
2910-01-566-5636 is a Fuel Injection Nozzle Cooling Sleeve that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 2910-01-566-5636
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2910-01-566-5636
- US Army (A920)
- Effective Date:
- 1 Sep 2008
- Supplementary Receivers:
- AZ
- US Air Force (FGGC)
- Effective Date:
- 1 May 2009
- US Marine Corps (MC40)
- Effective Date:
- 1 Sep 2008
Approved Sources 2910-01-566-5636
- Part Number
- Manufacturer
- Status
- 1841095C1
- Manufacturer
- 338X5 - Navistar Defense Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 2910-01-566-5636
- Characteristic
- Specifications
- FIIG
- Specifications
- A23900
- End Item Identification [AGAV]
- Mrap - Unique Nsn - Used On 3 Mrap Variants; Mrap - Maxxpro Dash Iss W/Ogpk And W/Crows
- Material [MATT]
- Steel
- Part Name Assigned By Controlling Agency [CXCY]
- Sleeve, Injector
- Overall Diameter [ADAV]
- 1.041 Inches Minimum And 1.091 Inches Maximum
- Special Features [FEAT]
- Material: Type 3045 Stainless Steel Per Cems A-37 Passivated And Stress Relieved At 500? For 0.5 Hr.
- Surface Treatment [SFTT]
- Passivate
Weapon Systems (WSDC) 2910-01-566-5636
DLA Procurement Analysis 2910-01-566-5636
- Last Stock Position:
- 136 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 2910-01-566-5636
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 2910-01-566-5636
Freight Information 2910-01-566-5636
2910-01-566-5636 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114730. A Sub NMFC of X. It has a NMFC Description of BARRELS/LINERS/SLEEVES I/C ENGINE. 2910-01-566-5636 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58790 which rates the freight between FCL and LCL. 2910-01-566-5636 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 2910-01-566-5636 is not classified as a special type of cargo when transported by water. 2910-01-566-5636 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 2910-01-566-5636
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.5" H x -- W x -- L
- --
- --
- Physical Protection
- Any Suitable Process
- 8.5" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 2910-01-566-5636 2 Records
Contracting Technical Data File (CTDF) 2910-01-566-5636 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: