2910-99-807-8264

90536520993789053993789053 TRANSFORMER Restrictions https//www.nsnlookup.com /fsg-29/fsc-2910/uk 2910-99-807-8264
Compensating Jet 2910998078264 998078264 1240-15-075-4306 1240150754306 150754306 VETRINO https

6520-99-250-1268 6520992501268 992501268 CONTAINER

2920-00-404-2988 2920004042988 004042988 COIL ASSEMBLY,FIELD

5310-14-252-7454 5310142527454 142527454 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

2920-12-148-4141 2920121484141 121484141 is a regulator designed to automatically maintain the current and/or voltage output of an engine generator within specified limits, regardless of variation of load or input voltages. may include cutout relay. does not include items in which regulation is accomplished by transformer action. see also regulator, current and regulator, voltage.