2910-15-066-6406

2910-15-066-6403 2910150666403 150666403 CARTUCCIA https//www.nsnlookup.com /fsg-29/fsc-2910/it 2910-15-066-6406
Cartuccia 2910150666406 150666406,200175 2910-15-066-6406 2910150666406 150666406 CARTUCCIA https

CAGE N3215 Lekolar As (Haaland & Hamre) in Asker, Norway

3040-15-199-8682 3040151998682 151998682 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

2520-12-378-8384 2520123788384 123788384 is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around vehicular universal joints, propeller shafts, transfer transmission assembilies, and the like. sealing may be either static or dynamic. the item may include mounting hardware (support plates, clamps and the like). see also boot, vehicular components. excludes boot, dust and moisture seal.

5360-99-526-7518 5360995267518 995267518 is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. the close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. excludes spring, reinforcing, hose.