2910-14-209-1340

471-34608145144713460144713460 is a reusable item https//www.nsnlookup.com /fsg-29/fsc-2910/fr 2910-14-209-1340
Couvercle Complet 2910142091340 142091340 nonmetallic round section and rubber,round section. https

5331-14-287-4592 5331142874592 142874592 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

5325-14-548-1405 5325145481405 145481405 is a parts kit consisting of one or more fasteners, such as bolts, screws, pins and the like. it may include nuts, washers, spacers and similar fastener components.

9320-14-566-1775 9320145661775 145661775 is an elastic material of compact (solid) or cellular structure having smooth, crepe or porous surface(s) and having an oval, parallelogram, square, rectangular or d-shaped cross section. it is produced in various thicknesses. strips are limited to widths of 6 inches (152.4mm) or less. it may or may not have a nonrubber backing or a wire cloth or cord insert. for items having a round cross section, see rubber round section. excludes rubber sheet, inner tube repair. see also nonmetallic angle; nonmetallic channel; nonmetallic special shaped section.

5310-14-519-0961 5310145190961 145190961 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.