2910-12-388-7113

Documents 3439-14-442-2137 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-29/fsc-2910/de 2910-12-388-7113
2910123887113 123887113,200.11.C 2910-12-388-7113 2910123887113 123887113 is a parts kit used for

Metering And Distributing Fuel Pump Parts Kit 0015860607RNCC: 3 | RNVC: 2 | DAC: 3 29 Jun 1984 2910-12-388-7113

4730-14-389-6414 4730143896414 143896414 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.

9530-01-162-7986 9530011627986 011627986 is a metallic product of ferrous or nonferrous material. it is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. it may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. rectangular shape cross-sectional dimensions are limited to those established in appendix c, fiig a131. it is round to a maximum diameter of 24 inches or 610.0mm. for a rectangular shape less than 3/32 inch or 2.5mm thickness, see wire (1), nonelectrical.

9530-01-167-2460 9530011672460 011672460 is a metallic product of ferrous or nonferrous material. it is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. it may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. rectangular shape cross-sectional dimensions are limited to those established in appendix c, fiig a131. it is round to a maximum diameter of 24 inches or 610.0mm. for a rectangular shape less than 3/32 inch or 2.5mm thickness, see wire (1), nonelectrical.