NSN Lookup

Engine Accessories

Federal Supply Group (FSG): 29

NATO Supply Classification Group (NSG): 29

Note-Unless specifically excluded, engine accessories for all vehicles, such as aircraft, motor vehicles, ships, tractors, and construction vehicles, as well as accessories for stationary engines, are classified in this Group.

FSG 29 Engine Accessories
FSG 29 Engine Accessories
Miscellaneous Engine Accessories, Nonaircraft
Engine Air and Oil Filters, Cleaners, Aircraft Prime Moving
Engine Fuel System Components, Nonaircraft
Turbosupercharger and Components
Engine Electrical System Components, Nonaircraft
Engine Cooling System Components, Nonaircraft
Engine Air and Oil Filters, Strainers, and Cleaners, Nonaircraft
Engine System Cooling Components, Aircraft Prime Moving
Engine Fuel System Components, Aircraft and Missile Prime Movers
Engine Electrical System Components, Aircraft Prime Moving
Miscellaneous Engine Accessories, Aircraft

Frequently Asked Questions (FAQ) for Federal Supply Group 29

What is Federal Supply Group 29?
FSG 29 is the Federal Supply Group (formally known as NATO Supply Classification Group NSG 29) in the USA for supply items codified in the category of Engine Accessories.
What is NATO Supply Classification Group 29?
NSG 29 is the NATO Supply Classification Group (also known as Federal Supply Group FSG 29 in the USA) for supply items codified in the category of Engine Accessories.
Which Federal Supply Classes are in FSG 29?
FSG 29 contains the following Federal Supply Classes (FSC) (formally known as NATO Supply Classification Class [NSC]): 2990, 2945, 2910, 2950, 2920, 2930, 2940, 2935, 2915, 2925, 2995, 2996
Which NATO Supply Classification Classes are in NSG 29?
NSG 29 contains the following NATO Supply Classification Classes (NSC) (also known as Federal Supply Class [FSC] in the USA): 2990, 2945, 2910, 2950, 2920, 2930, 2940, 2935, 2915, 2925, 2995, 2996

Supply Items Included in Federal Supply Group 29

GOVERNOR,GASOLINE ENGINE 340 Items
What is a Push-Pull Control Assembly? 1553 Items
APush-Pull Control Assembly(CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Hand Engine Starter? 199 Items
AHand Engine Starter(STARTER,ENGINE,HAND) is an item primarily designed to crank an internal combustion engine by manual operation. It usually consists of a GEARBOX and/or FLYWHEEL which is brought to a high speed, prior to engagement, by operation of a HAND CRANK or a hand pulled automatic rewind device. It may include facilities for adding an electric motor.
MUFFLER,EXHAUST 5086 Items
MUFFLER,EXHAUST-INTAKE 133 Items
MUFFLER,INTAKE 188 Items
What is an Engine Starter Rope? 229 Items
AnEngine Starter Rope(STARTER ROPE,ENGINE) is a short length of rope with attached handle used for manually starting a gasoline engine.
What is a Linear Electro-Mechanical Actuator? 290 Items
ALinear Electro-Mechanical Actuator(ACTUATOR,ELECTRO-MECHANICAL,LINEAR) is a self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of linear (straight line) mechanical movement. Comprised of an electrical motor(s), gear box(es), screwjacks, limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.
What is an Engine Coolant Heater? 426 Items
AnEngine Coolant Heater(HEATER,COOLANT,ENGINE) is a heater designed to burn fuel or utilize electric power which applies heat through direct connection to the engine coolant system to facilitate starting in low temperatures; may also supply heated coolant to heat exchangers. Must have mounting facilities. See also HEATER, AIR DUCT, ENGINE and HEATER, AIR DUCT-COOLANT, ENGINE.
What is a Piston Ring Set? 72 Items
APiston Ring Set(RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is an Engine Air Duct Heater? 86 Items
AnEngine Air Duct Heater(HEATER,AIR DUCT,ENGINE) is a heater designed to burn fuel which applies heat through ducts to engine surfaces, battery and the like to facilitate starting in low temperatures. It is not connected to the engine coolant system; must have mounting facilities and be equipped with a blower(s) (fan). See also HEATER, AIR DUCT-COOLANT, ENGINE and HEATER, COOLANT, ENGINE.
What is an Engine Air Duct-Coolant Heater? 28 Items
AnEngine Air Duct-Coolant Heater(HEATER,AIR DUCT-COOLANT,ENGINE) is a heater designed to burn fuel which applies heat by means of air ducts and a direct connection to the engine coolant system to facilitate starting in low temperatures; May also supply heat to engine surfaces, battery, and the like; must have mounting facilities and be equipped with a blower(s) (fan). See also HEATER, AIR DUCT, ENGINE and HEATER, COOLANT, ENGINE.
What is a Hand Crank? 236 Items
AHand Crank(CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
PARTS KIT,DIESEL ENGINE GOVERNOR 105 Items
PARTS KIT,GASOLINE ENGINE GOVERNOR 57 Items
PARTS KIT,HAND ENGINE STARTER 16 Items
What is a Gas Turbine Engine Starter? 133 Items
AGas Turbine Engine Starter(STARTER,ENGINE,GAS TURBINE) is an item designed to accelerate a gas turbine engine from rest to starter cutoff speed by means of a combustion gas driven turbine and reduction gear assembly constructed to be mounted on the engine starter drive. The combustion gas is generated from ignited liquid fuel and air in the combustion chamber or from a solid propellant cartridge attached to the combustion chamber of the starter. May have provision for energizing the turbine by low pressure air from engine bleed or ground equipment air supply.
What is a Supercharger Parts Kit? 84 Items
ASupercharger Parts Kit(PARTS KIT,SUPERCHARGER) is a parts kit used for the repair of a supercharger other than integral engine type. It may contain such items as clamps, gaskets, preformed packing, pilots, retainers, shims, springs, washers, and the like.
What is an Engine Starter Unit? 104 Items
AnEngine Starter Unit(STARTER UNIT,ENGINE) is a manually pushed or towed unit designed to provide electric power for starting aircraft or vehicle engines. It is wheel mounted and may have handles for portability. It has one or more batteries and may or may not include a battery charger. If the battery charger is included, it may be used either to charge the batteries in the unit or in the aircraft/vehicle. Excludes STARTER,ENGINE,ELECTRICAL; and STARTER,ENGINE,GASOLINE.
What is a Metallic Particle Detector? 257 Items
AMetallic Particle Detector(DETECTOR,METALLIC PARTICLE) is a sensing device designed to detect the presence of metallic foreign matter in fuel, hydraulic, or lubricating systems. Detection completes an integral electrical circuit that actuates an external signal and/or actuate the engine to stop.
What is a Spark Exhaust Arrester? 198 Items
ASpark Exhaust Arrester(ARRESTER,SPARK EXHAUST) is a device designed to prevent the escape of sparks from the exhaust of reciprocating internal combustion engines. It functions by trapping glowing carbon particles from exhaust gases in a receptacle that can be serviced.
What is an Intake Manifold? 206 Items
AnIntake Manifold(MANIFOLD,INTAKE) is a preformed metallic item with one or more inlet ports and two or more outlet ports. It is designed to collect and direct air (diesel application) and/or fuel-air mixture (gasoline application) to the cylinders of an internal combustion engine.
What is an Exhaust Pipe Connector? 574 Items
AnExhaust Pipe Connector(CONNECTOR,EXHAUST PIPE) is a preformed, rigid, metallic item, straight or angular having one or both ends processed and/or terminated. It is specifically designed to connect an exhaust pipe to an exhaust manifold, spark arrester, muffler, catalytic converter or to join piping in an exhaust system of an engine, heater, or the like. For items over 12 inches in length and items specifically designed as a tailpipe see PIPE, EXHAUST.
What is an Exhaust Pipe Flange? 367 Items
AnExhaust Pipe Flange(FLANGE,EXHAUST PIPE) is an item with a threaded or unthreaded hole specifically designed for use with an exhaust pipe, exhaust pipe connector, companion flange or the like in an engine or heater exhaust system. The face of the flange is normally drilled for connecting bolts and/or studs.
What is a Starting Rope Handle? 86 Items
AStarting Rope Handle(HANDLE,STARTING ROPE) is an item, specifically designed to be attached to a length of rope to form a STARTER ROPE, ENGINE.
PARTS KIT,ENGINE OIL PUMP 45 Items
PARTS KIT,POWER TAKE-OFF 16 Items
PARTS KIT,THROTTLE CONTROL LEVER 57 Items
What is an Engine Exhaust System Hanger? 568 Items
AnEngine Exhaust System Hanger(HANGER,ENGINE EXHAUST SYSTEM) is a metal or combination metal and rubber device designed to absorb shock and/or suspend, mufflers, tail pipes and the like. May include items such as u-bolt(s), washers, nuts and the like. Excludes STRAP, RETAINING; and BRACKET (as modified).
What is a Positive Crankcase Ventilation Valve? 82 Items
APositive Crankcase Ventilation Valve(VALVE,POSITIVE CRANKCASE VENTILATION) is a device designed to withdraw blow-by fumes from the engine and recirculate them into the combustion chamber. Consists of items as a plunger, spring, body and the like. Excludes VALVE (1), AIR PRESSURE RELIEF and VALVE SAFETY RELIEF.
What is an Emission Control Air Pump? 35 Items
AnEmission Control Air Pump(PUMP,AIR,EMISSION CONTROL) is a device having inlet port(s) discharge outlet(s) designed to produce compressed air for injection into the exhaust manifold of an internal combustion engine.
What is an Emission Air Exhaust Manifold? 93 Items
AnEmission Air Exhaust Manifold(MANIFOLD,AIR EXHAUST,EMISSION) is a preformed metallic item with one or more inlet ports and two or more outlet ports. It is designed to direct air pressure into the exhaust manifolds to reduce hydrocarbons.
What is an Automotive Catalytic Converter? 145 Items
AnAutomotive Catalytic Converter(CONVERTER,CATALYTIC,AUTOMOTIVE) is a metallic device applicable to the exhaust system. It is designed to reduce hydrocarbon and carbon monoxide pollution in the gas stream. It may contain a monolith or bead-type catalytic material.
What is an Automotive Engine Temperature Switch? 240 Items
AnAutomotive Engine Temperature Switch(SWITCH,ENGINE TEMPERATURE,AUTOMOTIVE) is a threaded device with electrical contact(s) designed to send a signal to a warning light or to a gauge that indicates engine temperature.
What is an Engine Oil Pump Assembly? 436 Items
AnEngine Oil Pump Assembly(OIL PUMP ASSEMBLY,ENGINE) is a device designed to maintain oil pressure within the moving parts of an internal combustion engine. May contain parts such as shaft, gears, pin, bushing, screen, adjusting screw and the like.
What is an Emission Control Vacuum Bleed Filter? 12 Items
AnEmission Control Vacuum Bleed Filter(VACUUM BLEED FILTER,EMISSION CONTROL) is a device designed to allow a small amount of air to enter vacuum lines to remove gasoline vapors that may accumulate.
What is an Emission Control Deceleration Valve Diaphragm? 14 Items
AnEmission Control Deceleration Valve Diaphragm(DIAPHRAGM,DECELERATION VALVE,EMISSION CONTROL) is a device used as a means of supplying additional air/fuel mixture to the carburetor during deceleration.
What is an Emission Control Breather Filter? 80 Items
AnEmission Control Breather Filter(BREATHER FILTER,EMISSION CONTROL) is a non-metallic device designed to filter air flow from the crankcase through the positive crankcase ventilation (PCV) valve into the air cleaner. Excludes FILTER ELEMENT, FLUID.
What is an Emission Control Three Way Solenoid? 23 Items
AnEmission Control Three Way Solenoid(SOLENOID,THREE WAY,EMISSION CONTROL) is a device designed to select the proper carburetor vacuum port in order to activate various emission controls depending upon the ambient under-hood temperature.
What is an Emission Control Orifice Spark Advance Control Valve? 11 Items
AnEmission Control Orifice Spark Advance Control Valve(ORIFICE SPARK ADVANCE CONTROL VALVE,EMISSION CONTROL) is a device that delays the vacuum advance during acceleration by restricting the flow of vacuum from the carburetor vacuum port to the distributor vacuum advance unit. Item may contain a thermal control device to sense carburetor air inlet temperature.
What is an Emission Control Crankcase Air Cleaner? 30 Items
AnEmission Control Crankcase Air Cleaner(AIR CLEANER,CRANKCASE,EMISSION CONTROL) is a device designed as part of the ventilation system to allow incoming air to mix with excess fumes and vapor and reburned in the combustion chamber. Item has inlet for an intake hose.
What is a Belt-Chain Tension Adjusting Device? 442 Items
ABelt-Chain Tension Adjusting Device(ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is an Engine Oil Pump Assembly Housing? 157 Items
AnEngine Oil Pump Assembly Housing(HOUSING,OIL PUMP ASSEMBLY,ENGINE) is a housing which supports, aligns, and positions internal parts of a OIL PUMP ASSEMBLY, ENGINE. It creates a boundary for close clearance of gears, vanes, or pistons to produce pressure or flow of fluids confined to the parameters of the housing.
What is a Vacuum Diaphragm? 44 Items
AVacuum Diaphragmis an encased device designed to actuate vehicular accessories when activated by a vacuum.
What is an Engine Exhaust System? 529 Items
AnEngine Exhaust System(EXHAUST SYSTEM,ENGINE) is an assembly specifically designed to exhaust and/or to muffle the sound of gases produced by an engine. The item may include mounting hardware and seals.
What is a Diesel Engine Exhaust Pipe Damper? 166 Items
ADiesel Engine Exhaust Pipe Damper(DAMPER,EXHAUST PIPE,DIESEL ENGINE) is a throttle plate installed in the exhaust manifold of an engine and designed to boost the engine braking action by adjustment of the exhaust pipe cross-section. Mounting elements may be included.
What is a Push-Pull Control Assembly Parts Kit? 12 Items
APush-Pull Control Assembly Parts Kit(PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
What is an Engine Sound Reduction Case Section? 150 Items
AnEngine Sound Reduction Case Section(CASE SECTION,SOUND REDUCTION,ENGINE) is an item of various shapes or design representing a part of a CASE (3), SOUND REDUCTION, ENGINE. It includes fastening, sealing and locking features.
What is an Engine Sound Reduction Case? 53 Items
AnEngine Sound Reduction Case(CASE,SOUND REDUCTION,ENGINE) is a case enclosing an engine and designed to reduce the sound produced by an engine. The item is provided with corresponding fastening, sealing, and locking features.
What is a Flywheel Housing Adapter? 89 Items
AFlywheel Housing Adapter(ADAPTER,FLYWHEEL HOUSING) is a circular metallic adapter with bolt holes designed to provide accommodations for adapting power driven devices to the housing of a FLYWHEEL, ENGINE.
What is a Starter Air Distributor? 101 Items
AStarter Air Distributor(AIR DISTRIBUTOR,STARTER) is a cast or pressed item specifically designed to be driven by a shaft and to conduct compressed air for the starting process into the cylinders by means of distribution disk.
PARTS KIT,TURBO SUPERCHARGER 244 Items
SUPERCHARGER,ENGINE,NON-AIRCRAFT 118 Items
LINK ASSEMBLY,CONTROL GOVERNOR,ENGINE 89 Items
What is a Reinforcement Transmission To Engine Ring? 13 Items
AReinforcement Transmission To Engine Ring(RING,REINFORCEMENT TRANSMISSION TO ENGINE) is a rigid, circular item designed to provide strength and support to flywheel and ring gear assembly of the engine to transmission adapter.
What is a Governor Weight Retainer Assembly? 24 Items
AGovernor Weight Retainer Assembly(RETAINER ASSEMBLY,GOVERNOR WEIGHT) is an assembly consisting of a retainer, hub, and retaining ring designed for a fuel injector pump to support and position the governor weights while rotating.
CONTROL,IDLE SPEED 31 Items
COVER,INTAKE MANIFOLD 138 Items
REEL,STARTING ENGINE 52 Items
GUARD,CRANKCASE 278 Items
What is an Emission Control Air Charged Temperature Sensor? 95 Items
AnEmission Control Air Charged Temperature Sensor(SENSOR,AIR CHARGED TEMPERATURE,EMISSION CONTROL) is a themistor device located in the intake manifold of electronic fuel injection systems, or carburetor air cleaner. It senses the air temperature to control the VACUUM DIAPHRAGM which opens or closes a damper in the air cleaner snorkel.
What is an Emission Control Crankshaft Position Sensor? 133 Items
AnEmission Control Crankshaft Position Sensor(SENSOR,CRANKSHAFT POSITION,EMISSION CONTROL) is a permanent magnet with a coil. It produces alternating current pulsation when the magnet field or sensor is disrupted by a gear tooth or notch. It senses pulse ring lobes. The resultant signal enables the electronic control assembly to determine when the ignition module should be triggered to produce a spark. Also, provides revolutions per minute information which is used to calculate spark advance and exhaust gas recirculation flow, and air/fuel ratio, (replaces distributor centrifugal advance weights and timing pickup). One pulse is produced for each cylinder every other engine rotation (one for each spark plug firing).
What is an Emission Control Exhaust Valve Position Sensor? 17 Items
AnEmission Control Exhaust Valve Position Sensor(SENSOR,EXHAUST VALVE POSITION,EMISSION CONTROL) is a potentionmetric device whose sensor wiper position is proportional to exhaust gas recirculation valve pintle position. This allows the electronic control assembly to determine actual exhaust gas recirculation flow at any point and time.
What is an Emission Control Engine Coolant Temperature Sensor? 223 Items
AnEmission Control Engine Coolant Temperature Sensor(SENSOR,ENGINE COOLANT TEMPERATURE,EMISSION CONTROL) is a metallic and/or non-metallic device with various ports on one end and a wrenching facility between ends. The opposite end may be threaded and contain a temperature probe. It is normally located on the upper engine block, on the water jacket or screwed into the upper radiator tank. Depending on individual temperature calibration it opens or closes various ports in order to channel manifold vacuum to devices which activate, de-activate or modify functions in fuel economy, cold temperature override, thermal ignition control, exhaust gas recirculation and other systems by sensing engine water temperature.
What is an Emission Control Manifold Absolute Pressure Sensor? 223 Items
AnEmission Control Manifold Absolute Pressure Sensor(SENSOR,MANIFOLD ABSOLUTE PRESSURE,EMISSION CONTROL) is a device used to read the manifold pressure in an automotive system. Provides a signal to the vehicles computer to adjust the air/fuel mixture.
What is an Emission Control Barometric Pressure Sensor? 55 Items
AnEmission Control Barometric Pressure Sensor(SENSOR,BAROMETRIC PRESSURE,EMISSION CONTROL) is a device used to read the barometric pressure in an automotive system. Provides a signal to the vehicles computer to adjust the air/fuel mixture.
What is an Emission Control Barometric And Manifold Pressure Sensor? 39 Items
AnEmission Control Barometric And Manifold Pressure Sensor(SENSOR,BAROMETRIC AND MANIFOLD PRESSURE,EMISSION CONTROL) is a device used to read both the barometric and manifold pressure in an automotive system. Provides a signal to the vehicles computer to adjust the air/fuel mixture. See also SENSOR,BAROMETRIC PRESSURE,EMISSION CONTROL; and SENSOR,MANIFOLD ABSOLUTE PRESSURE,EMISSION CONTROL.
What is an Emission Control Oxygen Exhaust Gas Sensor? 179 Items
AnEmission Control Oxygen Exhaust Gas Sensor(SENSOR,EXHAUST GAS,OXYGEN,EMISSION CONTROL) is a plug type device with an electronic connector or contact at one end, a wrenching facility in the middle. The opposite end may be threaded with a probe device. It is designed to change its output voltage as the exhaust gas to oxygen content changes when compared to the oxygen content of the atmosphere. A constantly changing voltage signal is sent to the electronic control assembly and microprocessor control unit for analysis and adjustment of the air/fuel ratio.
What is a Spark Ignition Engine Starter? 10 Items
ASpark Ignition Engine Starter(STARTER,ENGINE,SPARK IGNITION) is an item consisting of a spark ignited engine and integral and associated components primarily designed to crank an internal combustion engine until it starts operating under its own power. It may include facilities for manual and/or mechanical actuation. See also STARTER, ENGINE, ELECTRICAL.
ADAPTER,FILLER NECK 86 Items
What is a Control Cable Assembly? 374 Items
AControl Cable Assembly(CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is an Engine Monitor? 85 Items
AnEngine Monitor(MONITOR,ENGINE) is an item designed to indicate visually or acoustically, the operating status of an internal combustion engine when reaching critical conditions in terms of lubricating oil pressure, oil mist concentration, operating and bearing temperatures and the like. A speed reduction or operation cutoff device may be included. See also MONITOR, COOLING, WATER.
What is an Engine Electronic Regulator-Control? 442 Items
AnEngine Electronic Regulator-Control(REGULATOR-CONTROL,ELECTRONIC,ENGINE) is an item designed for electronically regulating and controlling speed governors and volumetric flow regulators, injection pumps, turbochargers, the switching on and off and other operations as a function of engine speed and volumetric efficiency of the cylinders. Excludes GOVERNOR (1), DIESEL ENGINE and GOVERNOR (1), GASOLINE ENGINE.
What is an Engine Regulator-Control Housing? 104 Items
AnEngine Regulator-Control Housing(HOUSING,REGULATOR-CONTROL,ENGINE) is a housing designed to accommodate and support component parts of a REGULATOR-CONTROL, ELECTRONIC, ENGINE.
What is an Engine Coolant Heater Parts Kit? 50 Items
AnEngine Coolant Heater Parts Kit(PARTS KIT,HEATER,COOLANT,ENGINE) is a parts kit, used for the repair of a HEATER, COOLANT, ENGINE. It may include clamps, belts, adapters and hose assemblies.
What is a Vehicular Insulation? 27 Items
AVehicular Insulation(INSULATION,VEHICULAR) is an item composed of fiber, plastic foam, or synthetic material(s) in variousshapes and sizes. It is designed to reduce sound and/or provide resistance to the flow of heat. It may contain a vapor barrier or a fabric treated surface. It may include mounting holes.
What is an Engine Exhaust System Installation Kit? 47 Items
AnEngine Exhaust System Installation Kit(INSTALLATION KIT,ENGINE EXHAUST SYSTEM) is an installation kit used to install an exhaust system where a gasoline or diesel engine is used in direct connection with another major piece of equipment. May include exhaust pipe directly connected to the engine.
What is a Diesel Engine Governor Housing? 49 Items
ADiesel Engine Governor Housing(HOUSING,GOVERNOR,DIESEL ENGINE) is a housing designed to inclose, support and position internal parts of a GOVERNOR, DIESEL ENGINE.
What is a Diesel Engine Governor Housing Section? 106 Items
ADiesel Engine Governor Housing Section(HOUSING SECTION,GOVERNOR,DIESEL ENGINE) is a rigid item of various shapes or designs representing a part of a HOUSING, GOVERNOR, DIESEL ENGINE. It may include fastening, sealing and locking features.
What is an Engine Oil Pump Assembly Housing Section? 58 Items
AnEngine Oil Pump Assembly Housing Section(HOUSING SECTION,OIL PUMP ASSEMBLY,ENGINE) is a rigid item of different forms, which together with at least one further housing section forms a HOUSING (2), OIL PUMP ASSEMBLY, ENGINE.
What is an Engine Heater Coolant Combustion Chamber? 30 Items
AnEngine Heater Coolant Combustion Chamber(COMBUSTION CHAMBER,HEATER COOLANT,ENGINE) is an item generally tubular shaped, the fuel injected through a nozzle is atomized, mixed with combustion air and burnt. The resulting heat is used to heat the coolant. Item is part of a HEATER (1), COOLANT, ENGINE.
What is an Engine Coolant Heater Radiator? 82 Items
AnEngine Coolant Heater Radiator(RADIATOR,HEATER,COOLANT,ENGINE) is a predominantly metal item which can consist of two interlocking cylindrical cases. The inner cylinder accommodates the COMBUSTION, CHAMBER HEATER, COOLANT, ENGINE and can be equipped with ribs to enhance thermal conductivity. The heat radiating from the combustion chamber is transmitted via the wall and the ribs to the coolant flowing in the space between the inner and outer cylinder. Connectors for hoses, tubes and attachments can be included. excludes: RADIATOR, VEHICULAR COMPARTMENT HEATER.
What is an Engine Top Dead Center Pointer? 24 Items
AnEngine Top Dead Center Pointer(POINTER,TOP DEAD CENTER,ENGINE) is an item which is mounted on a crankcase as a substitute for a stamped marking. In connection with markings on rotating parts it is designed for visual control of the crankshaft angle in relation to the top dead center of the piston in the first cylinder of a combustion engine. Excludes INDICATOR PISTION POSITION, IGNITION TIMING.
What is an Engine Supplementary Kit? 99 Items
AnEngine Supplementary Kit(SUPPLEMENTARY KIT,ENGINE) is a collection of items with different basic names designed to extend the function, use, or the operational capabilities of internal combustion engines and/or their systems.
What is an Engine Governor Diaphragm? 93 Items
AnEngine Governor Diaphragm(DIAPHRAGM,GOVERNOR,ENGINE) is an item in the form of a thin sheet, film or membrane, made of metallic or non-metallic material, which is mounted between the two halves of a housing. It is fixed at the edge to form an airtight seal.
What is an Air Engine Starter Rotor? 51 Items
AnAir Engine Starter Rotor(ROTOR,STARTER,ENGINE,AIR) is a rotor which is incorporated into a STARTER, ENGINE, AIR.
What is a Gas Turbine Engine History Recorder? 15 Items
AGas Turbine Engine History Recorder(RECORDER,HISTORY,GAS TURBINE ENGINE) is an instrument with multiple readouts designed to count and display the actual number of times engine parts experience mechanical and high thermal stress, engine interturbine gas temperatures in relation to time elapsed and actual engine operating hours. Counts are accumulated at various percentages of operating power. These readouts cannot be reset to zero.
What is a Lubricant System Oil Tank? 194 Items
ALubricant System Oil Tank(TANK,OIL,LUBRICANT SYSTEM) is a tank designed to hold the oil in a lubrication system. Excludes TANK (1), LUBRICATING OIL, AIRCRAFT.
What is a Power-Speed Control Lever Assembly? 287 Items
APower-Speed Control Lever Assembly(LEVER ASSEMBLY,POWER-SPEED CONTROL) is a metallic item which consists of at least two LEVER, REMOTE CONTROL and which can be actuated via a rod linkage, a cable linkage or a similar device. In general, it is mounted at/in speed controlling devices and/or above fuel injection pumps. The item may include mounting parts, bolts, and similar items.
What is a Flywheel Starter Ring? 81 Items
AFlywheel Starter Ring(RING,STARTER,FLYWHEEL) is a gear, cut externally on a ring-shaped rim and forming the mating gear with which the starter drive pinion engages.
What is an Engine Mounting Plate? 142 Items
AnEngine Mounting Plate(PLATE,MOUNTING,ENGINE) is a metallic item of various shapes designed to facilitate the installation of a reciprocating engine in a sub-frame or chassis frame.
What is an Emission Control Throttle Solenoid? 19 Items
AnEmission Control Throttle Solenoid(THROTTLE SOLENOID,EMISSION CONTROL) is an electro/mechanical device, carburetor mounted, which provides a stop for the throttle lever when the ignition is on. With the ignition off, the plunger retracts to allow the throttle valves to close, preventing engine dieseling.
What is an Emission Control Egr Valve Sensor? 15 Items
AnEmission Control Egr Valve Sensor(SENSOR,EGR VALVE,EMISSION CONTROL) is an electro/mechanical device used in electronically controlled EGR systems. The sensor provides a signal to the EEC system indicating the position of the EGR valve.
What is an Emission Control Vacuum Control Valve? 18 Items
AnEmission Control Vacuum Control Valve(VACUUM CONTROL VALVE,EMISSION CONTROL) is a mechanical device of various shapes with one or more ports to regulate vacuum to EGR valve, distributor, carbon canister purge valve and/or other emission control system components.
What is an Emission Control Air Valve? 79 Items
AnEmission Control Air Valve(VALVE,AIR,EMISSION CONTROL) is a control valve of various shapes which directs air to or from one or more emission devices under controlled conditions. Do not use if a more specific name applies.
What is an Exhaust Spark Arrester Housing? 22 Items
AnExhaust Spark Arrester Housing(HOUSING,SPARK ARRESTER,EXHAUST) is a mostly metallic item that houses the parts of a ARRESTER, SPARK EXHAUST.
What is an Exhaust Heat Shield? 695 Items
AnExhaust Heat Shield(HEAT SHIELD,EXHAUST) is a metallic item designed to restrict and/or deflect the heat radiated by an exhaust system. See also GUARD,MUFFLER-EXHAUST PIPE,AIRCRAFT and GUARD,MUFFLER-EXHAUST PIPE,NONAIRCRAFT.
What is a Nonaircraft Engine Oil Pump Assembly Housing? 47 Items
ANonaircraft Engine Oil Pump Assembly Housing(HOUSING,OIL PUMP ASSEMBLY,NONAIRCRAFT ENGINE) is an inclosure designed to support and protect the internal components of an OIL PUMP ASSEMBLY, ENGINE used specifically on nonaircraft type engines.
What is a Governor Booster Servomotor? 21 Items
AGovernor Booster Servomotor(BOOSTER SERVOMOTOR,GOVERNOR) is an item that supplies pressurized oil to a governor as the instant starting air reaches the engine. It may include a single or tandem piston and oil outlet(s) to the governor's pressurized oil system.
What is a Nonaircraft Muffler-Exhaust Pipe Guard? 735 Items
ANonaircraft Muffler-Exhaust Pipe Guard(GUARD,MUFFLER-EXHAUST PIPE,NONAIRCRAFT) is a protective covering, usually perforated and/or meshed, specifically designed to protect a nonaircraft engine muffler and/or exhaust pipe. It prevents physical damage to exposed exhaust system parts and prevents possible injury to personnel while the unit is operating and immediately after operation.
What is a Governor Vibration Dampener? 18 Items
AGovernor Vibration Dampener(DAMPENER,VIBRATION,GOVERNOR) is a device designed to compensate for and reduce the effects of vibration in the governor drive in an engine.
What is a Vehicular Hand Crank? 64 Items
AVehicular Hand Crank(CRANK,HAND,VEHICULAR) is an item used on engine accessories to manually transmit motion to a shaft or object. The item consists of a radial arm and has a handle parallel to its pivoted axis. It may have an integral extension. See also HANDLE, WINDOW REGULATOR, VEHICULAR.
What is a Governor Control Unit? 109 Items
AGovernor Control Unit(CONTROL UNIT,GOVERNOR) is a non-aircraft electronic unit that works in conjunction with a governor/actator that continously monitors engine speed, temperature, and air flow and adjusts the fuel control to compensate for changes. It is used with diesel or gas engines, or steam or gas tubines. It may include load sharing capabilities, rotor speed governing, loss-of-load protection and analog or manual back-up modes. It may contain automatic start capability or self-diagnostic circuitry.
What is a Turbocharger Cartridge? 57 Items
ATurbocharger Cartridge(CARTRIDGE,TURBOCHARGER) is an item that draws air in, circulates through the engine and exhausts the air.
What is a Throttle Position Sensor? 66 Items
AThrottle Position Sensor(SENSOR,THROTTLE POSITION) is a variable resistor used to signal the computer as to the position of the throttle plate. The signal allows for the adjustment of the fuel entering the engine. May or may not be adjustable.
What is a Mass Air Flow Sensor? 50 Items
AMass Air Flow Sensor(SENSOR,MASS AIR FLOW) is a unit employing a hot wire (resistive) element to measure the air flow into the intake manifold. It pre-heats the element to known temperature, then as air flows over the element (cooling it), the difference is sent to the computer for air/fuel mixture changes. Also see METER,VANE,AIR.
What is an Accessory Drive Thrust Plate? 21 Items
AnAccessory Drive Thrust Plate(PLATE,THRUST,ACCESSORY DRIVE) is a round, square, or rectangular item, having holes for mounting. It is designed to hold a gear assembly and bearing sleeve in an enclosure on the accessory drive for an air compressor.
GOVERNOR,DIESEL ENGINE 924 Items
What is a Supercharger Housing? 34 Items
ASupercharger Housing(HOUSING,SUPERCHARGER) is an item designed to envelop and/or align the moving parts of a supercharger used on an internal combustion engine. It may have passage(s), bearing(s), oil ring(s), stud(s), and/or the like. Excludes turbosupercharger housings.
What is an Exhaust Pipe? 6944 Items
AnExhaust Pipe(PIPE,EXHAUST) is a rigid tubular item designed to direct the exhaust gases away from an engine, heater, or the like. For flexible items, see HOSE, METALLIC.
What is an Engine Power Takeoff? 90 Items
AnEngine Power Takeoff(POWER TAKEOFF,ENGINE) is a mechanical device designed to be secured to an internal combustion engine and used to transmit the rotary motion of the crankshaft to auxiliary equipment, such as generators, cranes, pumps, compressors, mixers, and the like. Includes a power output shaft and a clutch which may be controlled by a hand lever or a hydraulic or air cylinder. May include pulley(s), flange, yoke or reduction gear unit. Excludes vehicular clutches and POWER TAKEOFF, TRANSMISSION.
What is an Air Engine Starter? 278 Items
AnAir Engine Starter(STARTER,ENGINE,AIR) is an item consisting of an air motor and integral and associated components primarily designed to crank an internal combustion engine until it starts operating under its own power. It may include facilities for manual or mechanical activation.
What is a Direct Combustion Engine Starter? 14 Items
ADirect Combustion Engine Starter(STARTER,ENGINE,DIRECT COMBUSTION) is an item designed to accelerate a gas turbine engine from rest to starting speed by means of gas generated by combustion of fuel and air in a combustion chamber, and thrust directly on the engine turbine through an impingement nozzle mounted in the turbine section. Consists of a combustion chamber, air and fuel system components and igniter. May include the starter tube and/or impingement nozzle.
What is a Gasoline Engine Starter? 82 Items
AGasoline Engine Starter(STARTER,ENGINE,GASOLINE) is an item consisting of a gasoline engine and integral and associated components primarily designed to crank an internal combustion engine until it starts operating under its own power. It may include facilities for manual and/or mechanical actuation. See also STARTER, ENGINE, ELECTRICAL.
What is a Muffler-Exhaust Pipe Protective Cap Assembly? 304 Items
AMuffler-Exhaust Pipe Protective Cap Assembly(CAP ASSEMBLY,PROTECTIVE,MUFFLER-EXHAUST PIPE) is an item designed to fit over the opening of an engine exhaust pipe or muffler to prevent the entrance of rain or foreign matter into the manifold section of a reciprocating engine while not in use. It is automatically opened when the engine is started by pressure exerted from the exhaust system. It is equipped with a hinging action and may or may not have a counter weight. Excludes CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drain Hole Extension? 12 Items
ADrain Hole Extension(EXTENSION,DRAIN HOLE) is a tube, usually metallic, designed to facilitate draining fluids from a PUMP UNIT (as modified), and the like. Excludes DRAINING KIT,FUEL.
What is an Exhaust Snorkel? 14 Items
AnExhaust Snorkel(SNORKEL,EXHAUST) is an item specially designed to prevent seawater from entering into the engine via a transom connection.
What is a Fluid Filter Element Set? 28 Items
AFluid Filter Element Set(FILTER ELEMENT SET,FLUID) is a group of FILTER ELEMENT,FLUID having different characteristics.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
What is a Motor Outboard Cover? 12 Items
AMotor Outboard Cover(COVER,MOTOR OUTBOARD) is a cover designed to fully enclose an OUTBOARD MOTOR for protection from damaging elements such as dust, sun, rain, and the like.
What is an Intake Air Cleaner? 3645 Items
AnIntake Air Cleaner(AIR CLEANER,INTAKE) is a device designed to prevent foreign particles from entering the air intake system of an internal combustion engine or air compressor. Excludes mufflers.
What is a Fluid Filter Cover? 642 Items
AFluid Filter Cover(COVER,FLUID FILTER) is a rigid item of various shapes designed as a component of a fluid filter, acting as the cover and retaining the filter element in place. The item does not have an inlet or outlet connection. It is fastened onto the FILTER BODY, FLUID by means of clamps or bolts. For items with inlet and/or outlet connections, see HEAD, FLUID FILTER.
What is a Fluid Filter Head? 942 Items
AFluid Filter Head(HEAD,FLUID FILTER) is a component of a fluid filter designed to contain the inlet and/or outlet ports of the filter. It acts as a cover and attaches to the fluid filter body or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, by-pass valves, and/or fluid filter element(s). It may have means for supporting the filter element(s), and means for mounting the filter. Excludes HEAD, SEDIMENT STRAINER and COVER, FLUID FILTER.
What is a Sediment Strainer Head? 74 Items
ASediment Strainer Head(HEAD,SEDIMENT STRAINER) is a component of a sediment strainer designed to contain the inlet and/or outlet ports of the strainer. It acts as a cover and attaches to the BOWL, SEDIMENT or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, and/or by-pass valves, means for supporting the strainer element, and means for mounting the strainer. The item does not include a strainer element. Excludes HEAD, FLUID FILTER.
What is a Fluid Filter Body? 1133 Items
AFluid Filter Body(FILTER BODY,FLUID) is a component of a FILTER, FLUID designed to contain the FILTER ELEMENT, FLUID and attach to the HEAD, FLUID FILTER or the COVER, ACCESS. It may have inlet and/or outlet connections, means for mounting a drain plug(s), check, relief and or by-pass valves. Excludes BOWL, SEDIMENT.See also STRAINER BODY, SEDIMENT.
What is a Fluid Filter? 6444 Items
AFluid Filter(FILTER,FLUID) is a filter having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. For spin-on, base-mounted filtering devices with integral outer casings, see FILTER ELEMENT, FLUID. Excludes AIR CONDITIONER.
What is a Fluid Filter Element? 9011 Items
AFluid Filter Element(FILTER ELEMENT,FLUID) is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
What is an Air Filter Parts Kit? 198 Items
AnAir Filter Parts Kit(PARTS KIT,AIR FILTER) is a collection of items used to repair/replace air filters. May include mounting hardware. Excludes PARTS KIT (1),BRAKE CHAMBER.
What is an Intake Air Cleaner Deflector? 125 Items
AnIntake Air Cleaner Deflector(DEFLECTOR,AIR CLEANER,INTAKE) is a generally metallic item of various shapes designed to deflect an airflow into or away from the intake air cleaner of a combustion engine/compressor. Excludes DEFLECTOR, AIRFLOW.
What is an Air Particle Separator? 96 Items
AnAir Particle Separator(SEPARATOR,PARTICLE,AIR) is a metallic panel or wrap around device, which with the use of centrifugal force, is designed to prevent entry of foreign objects or debris into the air intake of an aircraft turbine engine. Excludes FILTERS (as modified) and STRAINERS (as modified).
What is an Intake Air Cleaner Filter Body? 409 Items
AnIntake Air Cleaner Filter Body(FILTER BODY,INTAKE AIR CLEANER) is a part of an AIR CLEANER, INTAKE designed as a housing for a FILTER ELEMENT, INTAKE AIR CLEANER. Depending on the configuration, the item may be mounted at the top, the bottom or by means of a flanking flange. In general, the housing is a multipiece item and has air intake and air outlet.
What is an Aircraft Engine Filter Warning Indicator? 104 Items
AnAircraft Engine Filter Warning Indicator(INDICATOR,FILTER WARNING,AIRCRAFT ENGINE) is a mechnical indicator used on aircraft engine for dry or liquid type cleaners to provide a visual warning signal when a filter needs cleaning or changing.
What is an Intake Air Cleaner Filter Element? 4390 Items
AnIntake Air Cleaner Filter Element(FILTER ELEMENT,INTAKE AIR CLEANER) is a replaceable device designed to remove dust, pollen or other foreign matter from the air passing through it. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, or the like. It is designed to fit into an AIR CLEANER,INTAKE.
What is a Fluid Filtering Disk? 154 Items
AFluid Filtering Disk(FILTERING DISK,FLUID) is a flat, circular, replaceable device, with or without a centrally located hole, designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous, fibrous or shredded material (metallic or non-metallic) which retains the solid particles in the fluid passing through it. It may be encased and used as a single item or stacked to form a fluid filter element. Excludes DISK, SOLID, PLAIN; DIAPHRAGM (as modified); STRAINER ELEMENT, SEDIMENT; and WIRE FABRIC.
GOVERNOR,GASOLINE ENGINE 340 Items
What is a Float Carburetor? 1163 Items
AFloat Carburetor(CARBURETOR,FLOAT) is a carburetor utilizing one or more floats to maintain a constant liquid level.
CARBURETOR,PRESSURE INJECTION 109 Items
What is a Fueling Manifold? 24 Items
AFueling Manifold(MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
What is a Centrifugal Pump Impeller? 686 Items
ACentrifugal Pump Impeller(IMPELLER,PUMP,CENTRIFUGAL) is an item consisting of blades or paddles equally spaced around the periphery of a hub, rotor, or wheel. It is the rotating part of a PUMP, CENTRIFUGAL.
What is a Linear Electro-Mechanical Actuator? 290 Items
ALinear Electro-Mechanical Actuator(ACTUATOR,ELECTRO-MECHANICAL,LINEAR) is a self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of linear (straight line) mechanical movement. Comprised of an electrical motor(s), gear box(es), screwjacks, limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.
What is a Rotary Electro-Mechanical Actuator? 236 Items
ARotary Electro-Mechanical Actuator(ACTUATOR,ELECTRO-MECHANICAL,ROTARY) is a self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of torque (rotational mechanical movement). Comprised of an electric motor(s), gear box(es), limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.
What is a Pressure Regulating Pump Governor? 106 Items
APressure Regulating Pump Governor(GOVERNOR,PUMP,PRESSURE REGULATING) is a governor specifically designed to regulate the discharge pressure of reciprocating or turbine driven pumps. It may be actuated by either the pump discharge fluid or air flow from an external pilot valve.
PARTS KIT,CARBURETOR 723 Items
PARTS KIT,ENGINE FUEL PUMP 555 Items
PARTS KIT,GASOLINE ENGINE GOVERNOR 57 Items
What is a Metering And Distributing Fuel Pump Parts Kit? 291 Items
AMetering And Distributing Fuel Pump Parts Kit(PARTS KIT,METERING AND DISTRIBUTING FUEL PUMP) is a parts kit used for replacing the worn and/or broken parts of a PUMP, FUEL, METERING AND DISTRIBUTING.
PARTS KIT,SEDIMENT BOWL 21 Items
PARTS KIT,THROTTLE SLAVE CYLINDER 13 Items
What is an Engine Fuel Tank? 3508 Items
AnEngine Fuel Tank(TANK,FUEL,ENGINE) is a tank specifically designed to be installed as an integral part of an engine fuel system. Excludes TANK, FUEL, AIRCRAFT and TANK, LIQUID STORAGE, METAL.
What is a Cam Actuated Fuel Pump? 1521 Items
ACam Actuated Fuel Pump(PUMP,FUEL,CAM ACTUATED) is a device designed to transfer liquid fuel from a tank to a carburetor, or fuel injector metering and distribution pump of an internal combustion engine. Reciprocating motion of the diaphragm(s) is actuated through linkage from the engine camshaft. It may include a diaphragm actuated vacuum booster. Excludes electrical and rotor type engine fuel pumps.
What is a Fluid Filter Cover? 642 Items
AFluid Filter Cover(COVER,FLUID FILTER) is a rigid item of various shapes designed as a component of a fluid filter, acting as the cover and retaining the filter element in place. The item does not have an inlet or outlet connection. It is fastened onto the FILTER BODY, FLUID by means of clamps or bolts. For items with inlet and/or outlet connections, see HEAD, FLUID FILTER.
What is a Fluid Filter Head? 942 Items
AFluid Filter Head(HEAD,FLUID FILTER) is a component of a fluid filter designed to contain the inlet and/or outlet ports of the filter. It acts as a cover and attaches to the fluid filter body or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, by-pass valves, and/or fluid filter element(s). It may have means for supporting the filter element(s), and means for mounting the filter. Excludes HEAD, SEDIMENT STRAINER and COVER, FLUID FILTER.
What is a Sediment Strainer Head? 74 Items
ASediment Strainer Head(HEAD,SEDIMENT STRAINER) is a component of a sediment strainer designed to contain the inlet and/or outlet ports of the strainer. It acts as a cover and attaches to the BOWL, SEDIMENT or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, and/or by-pass valves, means for supporting the strainer element, and means for mounting the strainer. The item does not include a strainer element. Excludes HEAD, FLUID FILTER.
What is a Fluid Filter Body? 1133 Items
AFluid Filter Body(FILTER BODY,FLUID) is a component of a FILTER, FLUID designed to contain the FILTER ELEMENT, FLUID and attach to the HEAD, FLUID FILTER or the COVER, ACCESS. It may have inlet and/or outlet connections, means for mounting a drain plug(s), check, relief and or by-pass valves. Excludes BOWL, SEDIMENT.See also STRAINER BODY, SEDIMENT.
What is an Engine Primer Fuel? 32 Items
AnEngine Primer Fuel(FUEL,ENGINE PRIMER) is a specially compounded fuel designed to facilitate the quick starting of gasoline and diesel engines when, for reasons of temperature, humidity, altitude, or engine design, starting becomes a problem. Excludes CARTRIDGE, ENGINE STARTER.
What is a Fuel Tank Cock-Water Detector? 15 Items
AFuel Tank Cock-Water Detector(COCK-WATER DETECTOR,FUEL TANK) is a cylindrically shaped item composed of a perforated cylinder, a threaded adapter, and a self-locking drain cock. The item is designed to be inserted into a fuel tank to afford quick and complete sump drainage of water. Absolute detection of water is obtained by filling the cylinder with noncorrosive crystals which are insoluble in fuel but dissolve and cause discoloration in the presence of water.
What is a Diesel Engine Fuel Injector Parts Kit? 202 Items
ADiesel Engine Fuel Injector Parts Kit(PARTS KIT,FUEL INJECTOR,DIESEL ENGINE) is a group of parts, not having the same basic name, designed to transmit the intermittent motion. It is used for the replacement of worn and/or broken parts of a diesel engine fuel injector assembly. It may include pin(s), roller(s), socket(s), or wire locking.
What is a Jet Engine Fuel Pump? 393 Items
AJet Engine Fuel Pump(PUMP,FUEL,JET ENGINE) is a device specifically designed to deliver fuel to a jet engine. The device may be of single/multistage and positive/nonpositive displacement design. It mounts on a jet engine accessory drive case or on the fuel control and is driven by the engine. Excludes all pumps not specifically designed to be used on a jet engine.
What is a Fluid Filter? 6444 Items
AFluid Filter(FILTER,FLUID) is a filter having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. For spin-on, base-mounted filtering devices with integral outer casings, see FILTER ELEMENT, FLUID. Excludes AIR CONDITIONER.
What is a Fluid Filter Assembly? 433 Items
AFluid Filter Assembly(FILTER ASSEMBLY,FLUID) is two or more FILTER, FLUID on a common mounting or mounted on each other. They may be separable and operate in series, parallel, or individually.
What is a Fluid Filter Element? 9011 Items
AFluid Filter Element(FILTER ELEMENT,FLUID) is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
What is an Electrical Fuel Pump? 1080 Items
AnElectrical Fuel Pump(PUMP,FUEL,ELECTRICAL) is an electrically actuated positive displacement device, which utilizes reciprocating or rotary motion to transfer fuel from a tank to a carburetor or fuel injector metering and distribution pump of an internal combustion engine. Excludes General Purpose Pumps.
What is a Sediment Bowl? 410 Items
ASediment Bowl(BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is an Electro-Mechanical Linear Actuator Parts Kit? 11 Items
AnElectro-Mechanical Linear Actuator Parts Kit(PARTS KIT,ELECTRO-MECHANICAL LINEAR ACTUATOR) is a parts kit used to repair an ACTUATOR, ELECTRO-MECHANICAL, LINEAR. Excludes PARTS KIT, LINEAR ACTUATING CYLINDER ASSEMBLY.
What is an Engine Primer Pump Parts Kit? 14 Items
AnEngine Primer Pump Parts Kit(PARTS KIT,ENGINE PRIMER PUMP) is a parts kit used to repair a PUMP, ENGINE PRIMING, HAND DRIVEN.
PARTS KIT,ENGINE QUICK START VALVE 26 Items
What is a Fuel Injection Nozzle Parts Kit? 88 Items
AFuel Injection Nozzle Parts Kit(PARTS KIT,FUEL INJECTION NOZZLE) is excludes PARTS KIT, FUEL INJECTOR DIESEL ENGINE.
PARTS KIT,FUEL TANK 113 Items
PARTS KIT,SEDIMENT STRAINER 28 Items
PARTS KIT,THROTTLE CONTROL LEVER 57 Items
What is an Automotive Choke Thermostat? 79 Items
AnAutomotive Choke Thermostat(THERMOSTAT,CHOKE,AUTOMOTIVE) is a bimetallic device designed to open and close a valve to obtain proper air to fuel ratio when an engine is cold. May include items such as phenolic cover, linkage, metallic cover, coiled spring and the like. Excludes VALVE, BUTTERFLY.
What is an Emission Control Carbon Canister? 22 Items
AnEmission Control Carbon Canister(CANISTER,CARBON,EMISSION CONTROL) is a nonmetallic device of various shapes with hose type inlet and outlet connection(s). It contains activated charcoal and serves as a storage device for liquid and gasoline vapors. Designed for internal combustion engines.
What is an Emission Control Carburetor Choke Pull-Off? 24 Items
AnEmission Control Carburetor Choke Pull-Off(CHOKE PULL-OFF,CARBURETOR,EMISSION CONTROL) is an item designed to monitor engine vacuum to feather the choke opening in response to engine requirements, preventing stalls and hesitation from over-choking.
What is an Emission Control Valve Diverter? 32 Items
AnEmission Control Valve Diverter(DIVERTER,VALVE,EMISSION CONTROL) is an item designed to prevent backfire in the exhaust system during sudden deceleration and to relieve pump pressure.
What is an Emission Control Carburetor Choke Thermostat? 45 Items
AnEmission Control Carburetor Choke Thermostat(CHOKE THERMOSTAT,CARBURETOR,EMISSION CONTROL) is an item mounted on either the carburetor or intake manifold, designed to enrich fuel/air mixture, enabling the engine to overcome its cold temperature handicap during starting and warmup.
What is an Emission Control Fuel Separator? 22 Items
AnEmission Control Fuel Separator(FUEL SEPARATOR,EMISSION CONTROL) is a device which prevents fuel from entering the vacuum line to the distributor.
What is a Fuel Injector Assembly? 1678 Items
AFuel Injector Assembly(INJECTOR ASSEMBLY,FUEL) is an item consisting of springs, o-rings, plungers and miscellaneous internal and external parts that provide atomized fuel at specific pressure(s) to engine combustion chambers. It may include NOZZLE, FUEL INJECTION.
What is a Fuel Pump Housing? 377 Items
AFuel Pump Housing(HOUSING,FUEL PUMP) is an item designed to inclose, support or protect the internal parts of a fuel pump. It may be fabricated from a single casting or composed of two or more separate parts. Usually contains access holes to facilitate installation of component parts. May include access covers, busings, dowell plugs- and the like. Excludes: HOUSING, LIQUID PUMP.
What is a Fuel Control Parts Kit? 206 Items
AFuel Control Parts Kit(PARTS KIT,FUEL CONTROL) is a parts kit used to overhaul and/or repair FUEL CONTROLS, (as modified).
What is an Engine Fuel Component Adjustor? 253 Items
AnEngine Fuel Component Adjustor(ADJUSTOR,FUEL COMPONENT,ENGINE) is a regulating device threaded or unthreaded for the purpose of tuning the mechanism for which it is specifically designed. It may have a limiting collar, shoulder or slot. The rotating facility may be a hex head or collar, a slot or socket end. Excludes BOLT (as modified); screw (as modified); stud (as modified).
What is a Carburetor Nozzle? 1184 Items
ACarburetor Nozzle(NOZZLE,CARBURETOR) is an item generally of cylindrical shape with one or several bores which are designed to restrict the flow of fuel or air, respectively.
What is a Liquid Level Switch? 471 Items
ALiquid Level Switch(SWITCH,LIQUID LEVEL) is a switch which is actuated by a float or sensing device(s) to control liquid level and/or actuate visual or audible warning systems. It may include a relay controlled by the switch element. Excludes TRANSMITTER,LIQUID QUANTITY.
PARTS KIT,ETHER,STARTING AID 59 Items
SPRAY TIP,NOZZLE,FUEL INJECTOR 307 Items
What is a Stem Fuel Injection Nozzle? 61 Items
AStem Fuel Injection Nozzleis a device, usually metallic used as a means to regulate the flow of liquids through a NOZZLE, FUEL INJECTION. Excludes STEM, FLUID VALVE; STEM, NEEDLE VALVE.
What is a Fuel Injector Holder? 369 Items
AFuel Injector Holder(HOLDER,FUEL INJECTOR) is an item specifically designed to house the nozzle injector and other component items that function as an entity in an INJECTOR ASSEMBLY, FUEL. May include hardware.
PLATE,INTERMEDIATE,INJECTION 59 Items
ATOMIZER,STARTING FLUID 40 Items
PLUNGER,FUEL INJECTOR 99 Items
PLUNGER ASSEMBLY,FUEL INJECTOR 87 Items
What is a Carburetor Assembly? 261 Items
ACarburetor Assemblyis an item consisting of a CARBURETOR (1) (as modified) and other parts such as sensors, control units, and suction pipes which are required for mixture formation or for the control of the mixture composition, respectively.
What is a Fuel System Valve? 806 Items
AFuel System Valve(VALVE,FUEL SYSTEM) is an item specifically designed to automatically/manually maintain outlet/inlet fuel.
What is an Engine Accessories Modification Kit? 666 Items
AnEngine Accessories Modification Kit(MODIFICATION KIT,ENGINE ACCESSORIES) is an item or group of items employed to modify all engine accessories.
PLUNGER AND BUSHING,FUEL INJECTOR 30 Items
ARM,GOVERNOR,FUEL PUMP 57 Items
SLEEVE,GOVERNOR,FUEL PUMP 45 Items
What is a Special Shaped Actuator Valve Diaphragm? 195 Items
ASpecial Shaped Actuator Valve Diaphragm(DIAPHRAGM,ACTUATOR VALVE,SPECIAL SHAPED) is an item constructed of one or more layers of thin flexible material, either laminated or separated, designed to form a tight seal between the chambers of a valve, and to transmit pressure inducted motion to a valve disk either directly or through a mechanical linkage. The surface of the item must be formed or molded to have a beaded or rolled edge, ribs or any other raised surfaces. The item may contain bolt holes and/or center holes. Excludes DIAPHRA GM, VALVE, FLAT and GASKET.
What is a Fuel Nozzle Repair Kit? 25 Items
AFuel Nozzle Repair Kit(REPAIR KIT,FUEL NOZZLE) is a group of parts required for repairing or replacing worn parts of a NOZZLE, FUEL INSPECTION. It may contain tools.
What is an Engine Priming Pump Fuel Tank? 20 Items
AnEngine Priming Pump Fuel Tank(TANK,FUEL,ENGINE PRIMING PUMP) is an item designed to accommodate a measured amount of starting fuel and used as an integral part of a PUMP, ENGINE PRIMING, HAND DRIVEN.
What is an Engine Starting Cylinder? 33 Items
AnEngine Starting Cylinder(CYLINDER,ENGINE STARTING) is an item specifically designed to safely contain an meter a starting mixture, substance, and is compatible with other basic component items as an entity in a quick starting system for diesel engines.
What is a Fuel Tank Insert? 21 Items
AFuel Tank Insert(INSERT,TANK,FUEL) is a sponge like, porous item in different shapes designed to be inserted into a tank, such as a TANK (1), FUEL, ENGINE or a CELL, FUEL, AIRCRAFT, in order to support the flexible outer casing of the tank and to make it ballistic resistant through self-sealing properties. Fuel purification functions may be included.
What is a Fuel Control Housing? 137 Items
AFuel Control Housing(HOUSING,FUEL CONTROL) is a unit or component consisting of threaded inserts and other miscellaneous hardware. It is used on the main fuel control engine.
What is an Electrical Fuel Pump Controller? 44 Items
AnElectrical Fuel Pump Controller(CONTROLLER,FUEL PUMP,ELECTRICAL) is an item designed to switch on and off a PUMP, FUEL, ELECTRICAL as a function of predetermined operating values.
What is a Diesel Engine Governor Housing? 49 Items
ADiesel Engine Governor Housing(HOUSING,GOVERNOR,DIESEL ENGINE) is a housing designed to inclose, support and position internal parts of a GOVERNOR, DIESEL ENGINE.
What is a Fuel Pump Metering And Distributing Camshaft? 113 Items
AFuel Pump Metering And Distributing Camshaft(CAMSHAFT,METERING AND DISTRIBUTING,FUEL PUMP) is a shaft with eccentric lobes, which operates the distributing fuel pump pistons of a PUMP, FUEL, METERING AND DISTRIBUTING.
What is a Diesel Engine Governor Housing Section? 106 Items
ADiesel Engine Governor Housing Section(HOUSING SECTION,GOVERNOR,DIESEL ENGINE) is a rigid item of various shapes or designs representing a part of a HOUSING, GOVERNOR, DIESEL ENGINE. It may include fastening, sealing and locking features.
What is a Metering And Distributing Fuel Pump Injection Control? 207 Items
AMetering And Distributing Fuel Pump Injection Control(INJECTION CONTROL,METERING AND DISTRIBUTING FUEL PUMP) is a usually mechanically functioning item encased in a housing. It is used to advance the delivery of a PUMP, FUEL, METERING AND DISTRIBUTING with increasing engine rotation so that, with higher rotational speed of the engine, optimal combustion is obtained. This result is achieved by giving the pump shaft a certain advance angle in relation to the motor shaft.
What is a Metering And Distributing Fuel Pump Cylinder Assembly? 107 Items
AMetering And Distributing Fuel Pump Cylinder Assembly(CYLINDER ASSEMBLY,METERING AND DISTRIBUTING FUEL PUMP) is an item generally consisting of a piston and a cylinder. The piston is driven by the camshaft of the PUMP, FUEL, METERING AND DISTRIBUTING and delivers the fuel to the NOZZLE, FUEL INJECTION.
What is a Fuel System Parts Kit? 209 Items
AFuel System Parts Kit(PARTS KIT,FUEL SYSTEM) is a parts kit which contains such items as hoses, valves, connectors, bushings, clamps and accessories for the repair of a FUEL SYSTEM.
What is a Nonaircraft Fuel Cell? 17 Items
ANonaircraft Fuel Cell(CELL,FUEL,NONAIRCRAFT) is a non-metallic flexible container or bladder specifically designed to be installed internally as an integral part of an engine fuel system. Excludes CELL, FUEL, AIRCRAFT.
What is a Metering And Distributing Fuel Pump Control Rack? 89 Items
AMetering And Distributing Fuel Pump Control Rack(CONTROL RACK,METERING AND DISTRIBUTING FUEL PUMP) is the item is connected to the accelerator control pedal via the GOVERNOR (1), DIESEL ENGINE and a rod linkage. It is designed to turn the PLUNGER, FUEL INJECTOR when the engine is in action so that the delivery quantity of the PUMP, FUEL, METERING AND DISTRIBUTING can be changed from zero to maximum quantity. In order to enable a control of the delivery quantity, the item may have recesses or splines.
What is a Metering And Distributing Fuel Pump Control Sleeve? 37 Items
AMetering And Distributing Fuel Pump Control Sleeve(CONTROL SLEEVE,METERING AND DISTRIBUTING FUEL PUMP) is an item which rotates around a CYLINDER ASSEMBLY, METERING AND DISTRIBUTING FUEL PUMP and which is connected to a CONTROL RACK, METERING AND DISTRIBUTING FUEL PUMP. It is designed to convert the linear motion of the adjusting rod into the rotary motion of the cylinder assembly thus controlling the delivery rate.
What is a Diesel Engine Diesel Oil Heater? 135 Items
ADiesel Engine Diesel Oil Heater(HEATER,DIESEL OIL,DIESEL ENGINE) is a heater designed to ensure permanent supply of diesel fuel to engines in cold weather. It heats diesel fuel by means of ceramic resistance; when the engine is hot, the cooling water circuit takes over from the ceramic resistance. It includes the accessories such as filter cartridge, control unit and the like. Excludes: HEATER, COOLANT, ENGINE.
What is a Diesel Engine Diesel Oil Heater Body? 37 Items
ADiesel Engine Diesel Oil Heater Body(HEATER BODY,DIESEL OIL,DIESEL ENGINE) is the main or principal part of a HEATER, DIESEL OIL, DIESEL ENGINE which consists of various components such as ceramic resistance plate, heat exchanger, circuits connection and the like.
What is a Power Turbine Governor Weight? 44 Items
APower Turbine Governor Weight(WEIGHT,GOVERNOR,POWER TURBINE) is a weight which operates in opposition to a spring, feedback mechanism, manual control or simular device and regualtes the servo valve to increase or decrease fuel flow during engine high power operation.
GOVERNOR,TURBINE ENGINE 37 Items
What is a Fuel Pump Housing Section? 116 Items
AFuel Pump Housing Section(HOUSING SECTION,FUEL PUMP) is a rigid metallic item of different forms, which together with at least one further housing section, forms a HOUSING, FUEL PUMP.
What is a Carburetor Float Chamber? 33 Items
ACarburetor Float Chamber(FLOAT CHAMBER,CARBURETOR) is a detachable fuel reservoir from which the Jet(s),is supplied, and in which the fuel level is maintained constant by means of a fuel needle valve.
What is a Fuel Pump Hand Pump? 159 Items
AFuel Pump Hand Pump(PUMP,HAND,FUEL PUMP) is an item generally designed to be screwed into the housing of a PUMP, FUEL, CAM ACTUATED. It is used to fill the injection system of a combustion engine during start-up or refilling of pipes, or to vent the injection system after maintenance.
What is a Carburetor Needle Valve? 52 Items
ACarburetor Needle Valve(NEEDLE VALVE,CARBURETOR) is associated items, comprising a slender rod or needle fitting into a conical seat, designed to restrict the flow of fuel into the float chamber of a carburetor when the desired level is reached. See also NEEDLE, CARBURETOR NEEDLE VALVE and SEAT VALVE. Excludes NEEDLE, TAPERED, CARBURETOR.
What is a Carburetor Tapered Needle? 46 Items
ACarburetor Tapered Needle(NEEDLE,TAPERED,CARBURETOR) is a small needle designed to operate in a cylindrical bore or jet to give increased aperture with a greater lift. For items which are a component part of a NEEDLE VALVE, CARBURETOR see NEEDLE, CARBURETOR NEEDLE VALVE.
What is a Carburetor Venturi Tube? 11 Items
ACarburetor Venturi Tube(VENTURI TUBE,CARBURETOR) is an item designed for use in a CARBURETOR ASSEMBLY which measures the amount of air aspirated by the engine. The tube is wasp waisted and expanded at ends. The reduction in the cross section of the tube increases air velocity thus creating a corresponding vacuum at the point of least cross section. Also known as a choke tube.
What is a Fuel System Valve Holder? 126 Items
AFuel System Valve Holder(HOLDER,VALVE,FUEL SYSTEM) is an item generally designed to accommodate and hold a VALVE, FUEL SYSTELM in a HOUSING, FUEL PUMP.
What is a Fuel Injection Nozzle Tension Nut? 48 Items
AFuel Injection Nozzle Tension Nut(NUT,TENSION,NOZZLE,FUEL INJECTION) is a metallic, mostly cylindrical item which has an internal thread and which may have a hexagonal shoulder. The item forms a portion of the INJECTOR ASSEMBLY, FUEL and connects the NOZZLE, FUEL INJECTION with the HOLDER, FUEL INJECTOR.
What is a Fuel Injector Assembly Insert? 85 Items
AFuel Injector Assembly Insert(INSERT,FUEL INJECTOR ASSEMBLY) is a mostly metallic cylindrical item installed between the NOZZLE,FUEL INJECTION and the HOLDER,FUEL INJECTOR. It limits the needle stroke and provides a metallic seal between nozzle and nozzle holder.
What is a Carburetor Body? 57 Items
ACarburetor Body(BODY,CARBURETOR) is an item designed to enclose and support the internal parts of a CARBURETOR (as modified).
What is a Governor Weights Carrier? 34 Items
AGovernor Weights Carrier(CARRIER,GOVERNOR WEIGHTS) is an item designed to carry the weights of a centrifugal governor.
What is a Fuel Pump Cover? 191 Items
AFuel Pump Cover(COVER,FUEL PUMP) is a cover designed to cover the internal working parts of a PUMP, FUEL (as modified). It does not have inlet or outlet connections.
What is a Diesel Engine Fuel Separator-Purger? 15 Items
ADiesel Engine Fuel Separator-Purger(SEPARATOR-PURGER,FUEL,DIESEL ENGINE) is a systematic device consisting of a control panel, pump, collection container, removable filters and/or separators and the like. It is designed to remove water/contaminates/air from the fuel system while keeping the system primed.
What is a Diesel Engine Governor Weight? 77 Items
ADiesel Engine Governor Weight(WEIGHT,GOVERNOR,DIESEL ENGINE) is a weight which operates by centrifugal force in opposition to a spring to regulate the fuel supply either directly, through a mechanical linkage, or indirectly, through a hydraulic pilot valve.
What is a Portable Fuel Tank? 91 Items
APortable Fuel Tank(TANK,FUEL,PORTABLE) is a tank, with or without accessories, specifically designed to be portable, it may contain quick connect/disconnect facilities to complete an integral engine fuel system. Excludes TANK, FUEL, AIRCRAFT and TANK, LIQUID STORAGE, METAL.
What is a Nonaircraft Fuel Injector Nozzle Spray Tip? 87 Items
ANonaircraft Fuel Injector Nozzle Spray Tip(SPRAY TIP,NOZZLE,NONAIRCRAFT FUEL INJECTOR) is a device of various sizes with a varying number of precison drilled orifices in one end. It is designed to atomize a small quantity of accurately metered fuel into the combustion chamber of nonaircraft type engines.
What is an Adjustable Telescoping Linkage? 18 Items
AnAdjustable Telescoping Linkage(LINKAGE,TELESCOPING,ADJUSTABLE) is a long, slender device, adjustable in length, that may be fitted with hardware. It is a component of a speed regulator.
What is a Fuel Control Temperature Compensator? 34 Items
AFuel Control Temperature Compensator(COMPENSATOR,TEMPERATURE,FUEL CONTROL) is an expandable accordion shaped item with a moving rod, which can expand or contract lineraly. It converts temperature effects into controlled linear movement of the rod which actuates fuel control adjusting device.
What is a Diesel Engine Leak-Fuel Return Manifold Assembly? 45 Items
ADiesel Engine Leak-Fuel Return Manifold Assembly(MANIFOLD ASSEMBLY,LEAK-FUEL RETURN,DIESEL ENGINE) is a line from the fuel injectors to the fuel tank which allows fuel leaks from the injectors to return to the fuel tank. It generally consists of leak fuel pipes, fittings and the like.
What is a Starting Aid Fuel Injection Nozzle? 16 Items
AStarting Aid Fuel Injection Nozzle(NOZZLE,FUEL INJECTION,STARTING AID) is an item designed to meter and inject a specially compounded fuel at specific pressure intake manifolds of engines in order to facilitate the starting. Excludes: NOZZLE,FUEL INJECTION.
What is a Starting Aid Injection Fuel Reservoir? 11 Items
AStarting Aid Injection Fuel Reservoir(RESERVOIR,FUEL,INJECTION,STARTING AID) is a container which is designed for the storage and dispensing of specially compounded fuel through a NOZZLE,FUEL INJECTION,STARTING AID.
What is a Carburetor Float? 217 Items
ACarburetor Float(FLOAT,CARBURETOR) is a hollow, airtight device used to actuate an inlet valve for regulating the level of a liquid fuel in the bowl of a CARBURETOR,FLOAT. Excludes FLOAT,VALVE.
GOVERNOR,DIESEL ENGINE 924 Items
What is a Fuel Injection Nozzle? 2260 Items
AFuel Injection Nozzle(NOZZLE,FUEL INJECTION) is a spring loaded nozzle designed to meter and inject fuel at specific pressure(s) to engine fuel combustion chambers.
What is a Metering And Distributing Fuel Pump? 3621 Items
AMetering And Distributing Fuel Pump(PUMP,FUEL,METERING AND DISTRIBUTING) is a device specifically designed to (1) increase the pressure of, (2) meter the amount of, (3) control the distribution of liquid fuel received directly or indirectly from the TANK, FUEL, ENGINE to the individual air inlet tubes or combustion chambers of gasoline or diesel engines.
What is a Degasser Valve? 80 Items
ADegasser Valve(VALVE,DEGASSER) is a dual purpose mechanical and electrical valve specifically designed to prevent entry of fuel into the intake manifold of an ENGINE, GASOLINE during a deceleration period and/or to stop an idling engine prior to turning off ignition. It is actuated by high manifold vacuum and by a solenoid energized by the operator's push button switch. See also VALVE, SOLENOID.
What is a Hand Driven Engine Priming Pump? 152 Items
AHand Driven Engine Priming Pump(PUMP,ENGINE PRIMING,HAND DRIVEN) is a positive displacement pump specifically designed to force a measured amount of fuel to the intake manifold or combustion chamber of an internal combustion engine. It is designed for mounting to a bulkhead or panel. It may be furnished with attaching fittings and/or spacers which control capacity. Excludes DISPENSING PUMP, HAND DRIVEN.
What is a Turbine Engine Emergency Fuel Control? 42 Items
ATurbine Engine Emergency Fuel Control(FUEL CONTROL,EMERGENCY,TURBINE ENGINE) is a self-contained metering unit consisting primarily of pumping, controlling, valving, and/or governing components. It is designed for regulating the delivery of emergency fuel into a turbine engine.
What is a Turbine Engine Main Fuel Control? 1223 Items
ATurbine Engine Main Fuel Control(FUEL CONTROL,MAIN,TURBINE ENGINE) is a self contained metering unit consisting primarily of pumping, controlling, valving, and/or governing components. It is designed for regulating the delivery of fuel into the main fuel system of a turbine engine.
What is a Turbine Engine Starting Fuel Control? 67 Items
ATurbine Engine Starting Fuel Control(FUEL CONTROL,STARTING,TURBINE ENGINE) is a self-contained metering unit consisting primarily of pumping, controlling, valving, and/or governing components. It is designed for regulating the delivery of starting fuel into a turbine engine.
What is a Fuel Injection Nozzle Cooling Sleeve? 83 Items
AFuel Injection Nozzle Cooling Sleeve(SLEEVE,COOLING,FUEL INJECTION NOZZLE) is an item designed to dissipate heat from a fuel injection nozzle. It may be provided with cooling fins or ribs and may be connected to the cooling system of an internal combustion engine.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
What is a Fuel Tank Guard? 35 Items
AFuel Tank Guard(GUARD,FUEL TANK) is a safety device fabricated of rigid or semirigid material formed in various shapes. It may be fabricated from a single piece of material, and contains brackets, holes, or other means of attachments. It is designed to partially or fully inclose a TANK,FUEL,ENGINE.
What is a Belt-Chain Tension Adjusting Device? 442 Items
ABelt-Chain Tension Adjusting Device(ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Non-Aircraft Engine Turbo Supercharger? 1592 Items
ANon-Aircraft Engine Turbo Supercharger(TURBO SUPERCHARGER,ENGINE,NON-AIRCRAFT) is a mechanism for forcing additional air and increasing pressure in the cylinders of a reciprocating engine to increase power produced by the engine. The air utilized may come from the exhaust of the engine.
SHAFT ASSEMBLY,TURBOCHARGER 53 Items
What is a Turbo Supercharger Housing? 134 Items
ATurbo Supercharger Housing(HOUSING,TURBO SUPERCHARGER) is a housing consisting of several parts and designed to accommodate the components of a TURBOSUPERCHARGER (1), AIRCRAFT RECIPROCATING ENGINE or TURBOSUPERCHARGER (1), NON-AIRCRAFT and to keep them in position.
What is a Turbo Supercharger Compressor Rotor? 88 Items
ATurbo Supercharger Compressor Rotor(COMPRESSOR ROTOR,TURBO SUPERCHARGER) is a centrifugal type compressor designed to be driven by a TURBINE ROTOR, TURBOSUPERCHARGER to increase the pressure of the intake air of an internal combusion engine.
What is a Turbo Supercharger Turbine Rotor? 85 Items
ATurbo Supercharger Turbine Rotor(TURBINE ROTOR,TURBO SUPERCHARGER) is an item designed to drive a COMPRESSOR ROTOR, TURBOSUPERCHARGER and be driven by the exhaust gases of an internal combustion engine. The item may incorporate a shaft.
What is an Engine Non-Aircraft Turbo Supercharger Pipe Intake? 160 Items
AnEngine Non-Aircraft Turbo Supercharger Pipe Intake(PIPE INTAKE,TURBO SUPERCHARGER,ENGINE NON-AIRCRAFT) is a preformed, mostly metal item, generally tubular, which is designed to direct the fresh air required for combustion to the centrifugal impeller.
What is a Non-Aircraft Engine Turbo Supercharger Blade? 15 Items
ANon-Aircraft Engine Turbo Supercharger Blade(BLADE,TURBO SUPERCHARGER,ENGINE,NON-AIRCRAFT) is an item which is mounted to a rotor to create or accommodate an air or gas flow with a specified speed and direction and a specified pressure.
What is a Turbo Supercharger Guard? 45 Items
ATurbo Supercharger Guard(GUARD,TURBO SUPERCHARGER) is a mostly metallic cover of different shape and dimension designed for the protection of a turbosupercharger.
What is a Turbo Supercharger Nozzle? 22 Items
ATurbo Supercharger Nozzle(NOZZLE,TURBO SUPERCHARGER) is a ring-shaped item which is connected ahead of a TURBINE, ROTOR, TURBOSUPERCHARGER. It feeds exhaust gases in proper velocity and proper direction to the impeller blades.
What is a Turbo Supercharger Air Diffuser? 67 Items
ATurbo Supercharger Air Diffuser(DIFFUSER,AIR,TURBO SUPERCHARGER) is a ring-shaped item designed for continual inflow of the air to be compressed to the compressor rotor and which is connected ahead of a COMPRESSOR ROTOR, TURBOSUPERCHARGER.
What is an Aircraft Reciprocating Engine Turbo Supercharger? 51 Items
AnAircraft Reciprocating Engine Turbo Supercharger(TURBO SUPERCHARGER,AIRCRAFT RECIPROCATING ENGINE) is a centrifugal air compressor, gas turbine driven by engine exhaust gases, used to compensate for aircraft reciprocating engine induction system pressure decrease in high altitude operation.
What is a Turbocharger Bearing Lubricating Parts Kit? 14 Items
ATurbocharger Bearing Lubricating Parts Kit(PARTS KIT,LUBRICATING,TURBOCHARGER BEARING) is a parts kit used to replace parts of the lubricating circuit of a turbocharger bearing.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
What is a Distributor Contact Set? 277 Items
ADistributor Contact Set(CONTACT SET,DISTRIBUTOR) is a grouping of two or more separate distributor or magneto contacts.
What is an Ignition Magneto? 339 Items
AnIgnition Magneto(MAGNETO,IGNITION) is an electric generator whose field poles are permanent magnets and which is used to generate electrical energy for the purpose of igniting the combustible mixture in internal combustion engine cylinders. Spark distribution may be accomplished by a distributor portion of the magneto or by a separate item.
What is an Ignition Distributor Rotor? 312 Items
AnIgnition Distributor Rotor(ROTOR,IGNITION DISTRIBUTOR) is the rotating part of an ignition distributor which transfers electrical energy to stationary electrodes. Does not include shaft.
What is a Spark Plug? 1473 Items
ASpark Plugis an item containing two or more electrodes across which an electric spark is discharged to ignite a fuel and air mixture, primarily in internal combustion engines. Excludes GLOW PLUG; and ELECTRODE.
What is an Ignition System Distributor? 533 Items
AnIgnition System Distributor(DISTRIBUTOR,IGNITION SYSTEM) is a mechanism used to regulate the time and transmission of electrical energy in an ignition system for the purpose of igniting the combustible mixture in an internal combustion engine.
What is an Ignition Coil? 718 Items
AnIgnition Coil(COIL,IGNITION) is an item specifically designed to produce the high voltage necessary to provide a spark for igniting combustible mixtures, primarily in internal combustion engines.
What is an Ignition Lock Switch? 806 Items
AnIgnition Lock Switch(SWITCH,LOCK,IGNITION) is a switch which is externally actuated by a device such as a key/cylinder lock to actuate a remote lever or rod rack to activate a remote switch. The actuation device may or may not be an integal part of the switch. The primary purpose of the switch is to open and close the ignition circuit of an internal combustion engine and actuate various accessories. Excludes SWITCH, ENGINE STARTER, ELECTRICAL and SWITCH, LOCK.
What is a Generator Armature? 238 Items
AGenerator Armature(ARMATURE,GENERATOR) is an armature which is a part of a generator. See also ROTOR, GENERATOR.
What is a Motor Armature? 573 Items
AMotor Armature(ARMATURE,MOTOR) is an armature which is a part of a motor. See also ROTOR, MOTOR.
What is a Starter-Generator Armature? 146 Items
AStarter-Generator Armature(ARMATURE,STARTER-GENERATOR) is an armature which is a part of an electrical rotating machine that combines both starter and generator action.
What is a Generator Armature-Rotor? 39 Items
AGenerator Armature-Rotor(ARMATURE-ROTOR,GENERATOR) is the rotating member of an electrical generator which consists of an armature and a rotor on a common shaft. See also basic concept for Armature (1), and basic concept for Rotor (1).
What is a Generator Rotor? 449 Items
AGenerator Rotor(ROTOR,GENERATOR) is a rotor which is a part of an alternating current generator. See also ARMATURE, GENERATOR.
What is a Coil Form? 12 Items
ACoil Form(FORM,COIL) is an item specifically designed to form the foundation on which a coil is wound.
COVER,COIL 45 Items
What is a Magneto Contact Set Cover? 20 Items
AMagneto Contact Set Cover(COVER,CONTACT SET,MAGNETO) is a metallic item specifically designed to cover a magneto contact set. It may be fitted with one or more ventilation devices. See also CAP, (1), IGNITION DISTRIBUTION.
COVER,ELECTRIC MOTOR 150 Items
What is an Electrical Generator Cover? 194 Items
AnElectrical Generator Cover(COVER,ELECTRICAL GENERATOR) is excludes COVER, ACCESS; COVER, GENERATOR SET; and COVER, MOTOR-GENERATOR.
What is a Magneto Coil Cover? 27 Items
AMagneto Coil Cover(COVER,MAGNETO COIL) is a cover specifically designed for mounting on a magneto housing. It may include one or more fittings to facilitate the connection of ventilating and/or electrical devices.
What is an Ignition System Distributor Shield? 38 Items
AnIgnition System Distributor Shield(SHIELD,IGNITION SYSTEM DISTRIBUTOR) is an item specifically designed to be placed around an ignition distributor for the purpose of shielding against electrical interference and having provisions for passage of the ignition cable. May also provide mechanical protection.
What is a Spark Plug Shield? 70 Items
ASpark Plug Shield(SHIELD,SPARK PLUG) is an item specifically designed to be placed around a spark plug for the purpose of shielding against electrical interference and having provisions for passage of the ignition cable. May also provide mechanical protection.
BASE,MOTOR 46 Items
What is an Electrical Engine Starter? 3194 Items
AnElectrical Engine Starter(STARTER,ENGINE,ELECTRICAL) is an item consisting of an electric, direct current, motor and integral and associated components, primarily designed to crank an internal combustion engine, or a gas turbine engine until it starts operating under its own power. May include facilities for manual or mechanical actuation. Excludes MOTOR, ENGINE STARTER, ELECTRICAL; STARTER, MOTOR; STARTER, ENGINE (as modified); and SWITCH, ENGINE STARTER, ELECTRICAL.
What is an Electrical Rotating Equipment End Bell? 704 Items
AnElectrical Rotating Equipment End Bell(END BELL,ELECTRICAL ROTATING EQUIPMENT) is an item designed to support and position an armature or rotor when installed in a motor, generator or similar electrical rotating equipment. It may include items such as bearings, brushes, brush holders, oilers.
What is a Linear Electro-Mechanical Actuator? 290 Items
ALinear Electro-Mechanical Actuator(ACTUATOR,ELECTRO-MECHANICAL,LINEAR) is a self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of linear (straight line) mechanical movement. Comprised of an electrical motor(s), gear box(es), screwjacks, limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.
What is an Ignition Distribution Cap? 449 Items
AnIgnition Distribution Cap(CAP,IGNITION DISTRIBUTION) is a cap, generally of phenolic composition, designed to facilitate the connection of the high tension coil and spark plug leads to the distributor or magneto of an internal combustion engine.
What is a Generator Field Winding? 205 Items
AGenerator Field Winding(WINDING,GENERATOR FIELD) is a winding which is a maintenance part for an electric generator.
What is a Motor Field Winding? 380 Items
AMotor Field Winding(WINDING,MOTOR FIELD) is a winding which is a maintenance part for an electric motor.
What is a Starter-Generator Field Winding? 64 Items
AStarter-Generator Field Winding(WINDING,STARTER-GENERATOR FIELD) is a winding which is a maintenance item specifically designed for a starter-generator.
PARTS KIT,TERMINAL,ENGINE IGNITION 47 Items
What is an Electrical Engine Starter Motor? 364 Items
AnElectrical Engine Starter Motor(MOTOR,ENGINE STARTER,ELECTRICAL) is the component part of a STARTER, ENGINE, ELECTRICAL which transforms electrical energy into mechanical energy. It is specifically designed to energize an internal combustion engine starter.
What is an Electrical Engine Starter Relay-Solenoid? 603 Items
AnElectrical Engine Starter Relay-Solenoid(RELAY-SOLENOID,ENGINE STARTER,ELECTRICAL) is an item having a moving plunger type core which travels parallel to the longitudinal axis of the coil(s), and which is primarily designed to perform the dual function of closing the circuit of a STARTER, ENGINE, ELECTRICAL and actuating the starter engaging mechanism. It must have provisions for attaching the mechanical linkage for actuating the engaging mechanism if the linkage is not included. May have provisions for manual actuation. Without contacts this item is known as a SOLENOID, ELECTRICAL. Without provisions for attaching mechanical linkage this item is known as a RELAY, ELECTROMAGNETIC. See also SWITCH, ENGINE STARTER, ELECTRICAL.
What is an Engine Generator Regulator? 1262 Items
AnEngine Generator Regulator(REGULATOR,ENGINE GENERATOR) is a regulator designed to automatically maintain the current and/or voltage output of an engine generator within specified limits, regardless of variation of load or input voltages. May include cutout relay. Does not include items in which regulation is accomplished by transformer action. See also REGULATOR, CURRENT and REGULATOR, VOLTAGE.
What is an Ignition Interference Suppressor? 221 Items
AnIgnition Interference Suppressor(SUPPRESSOR,IGNITION INTERFERENCE) is an insulated cylindrical body, either straight or angular, containing a fixed resistance element, and usually with quick-disconnect type terminals, specifically constructed so that when connected in a high tension electrical ignition system it will reduce interference resulting from arcing of spark plugs, and similar devices. Excludes RESISTOR (as modified) and SUPPRESSOR, PARASITIC. See also FILTER, RADIO FREQUENCY INTERFERENCE.
What is an Engine Generator Cutout Relay? 103 Items
AnEngine Generator Cutout Relay(CUTOUT RELAY,ENGINE GENERATOR) is a device for automatically opening the circuit between an engine generator and the battery of the engine electrical system to prevent the flow of reverse current to the generator and automatically closing the circuit when the voltage of the generator reaches normal range. Excludes REGULATOR, CURRENT and RELAY (as modified).
ADAPTER,SPARK PLUG 43 Items
What is a Glow Plug? 895 Items
AGlow Plugis an item with a resistance type heating element for igniting fuel-air mixtures in ENGINE, DIESEL. Used for starting engines only. Excludes SPARK PLUG.
What is an Engine Accessory Generator? 3134 Items
AnEngine Accessory Generator(GENERATOR,ENGINE ACCESSORY) is a generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
What is an Electrical Engine Starter Switch? 393 Items
AnElectrical Engine Starter Switch(SWITCH,ENGINE STARTER,ELECTRICAL) is a manually operated item specifically designed to close the circuit of a STARTER, ENGINE, ELECTRICAL or the control circuit of its attendant solenoid. It must include a vacuum lock-out mechanism or utilize a switch contact independently mounted on the starter. For switches with integral contacts and no vacuum lock-out, see SWITCH (as modified). See also RELAY-SOLENOID, ENGINE STARTER, ELECTRICAL and STARTER, MOTOR.
What is a Magneto Coil? 187 Items
AMagneto Coil(COIL,MAGNETO) is an item consisting of two individual windings, one upon the other, inductively coupled, having a common iron core, specifically designed to convert the induced primary voltage to high secondary voltage required to ignite combustible mixtures, primarily in internal combustion engines; is a maintenance item for a magneto.
STATOR,ENGINE STARTER 116 Items
ROTOR,MAGNETO 102 Items
What is a Gas Turbine Engine Spark Igniter? 302 Items
AGas Turbine Engine Spark Igniter(IGNITER,SPARK,GAS TURBINE ENGINE) is an item having one or more electrodes arranged to form an air gap across which an electric spark is introduced and discharged to ignite fuel and air mixture in an internal combustion engine for the purpose of initial starting only. In engines designed for the single electrode type, two plugs are required within the combustion chamber in proper placement to effect the air gap. An igniter plug differs from a spark plug by always having cooling facilities in the form of holes or slots in the plug casing to allow entry of air currents around the electrode(s). Excludes SPARK PLUG; GLOW PLUG and ELECTRODE.
What is an Armature Support? 41 Items
AnArmature Support(SUPPORT,ARMATURE) is an item which consists of a mechanical or structural part designed to overcome the force of gravity, but is not intended to be the principal substaining member of an armature.
What is an Ignition Terminal Sleeve? 44 Items
AnIgnition Terminal Sleeve(SLEEVE,IGNITION TERMINAL) is an item consisting of an electrically insulated body, tubular in shape with provisions for insertion of wire. One end contains a spring to facilitate electrical contact and provisions for attaching a conductor. See also SUPPRESSOR, IGNITION INTERFERENCE. Excludes CLIP, ELECTRICAL; TERMINAL, LUG and CABLE NIPPLE, ELECTRICAL.
What is an Engine Generator Stator? 460 Items
AnEngine Generator Stator(STATOR,ENGINE GENERATOR) is a stator which is a maintenance part of a GENERATOR, ENGINE ACCESSORY.
What is an Engine Starter-Generator Stator? 45 Items
AnEngine Starter-Generator Stator(STATOR,STARTER-GENERATOR,ENGINE) is a stator which is a maintenance part of a STARTER-GENERATOR, ENGINE.
What is an Electrical Engine Starter Parts Kit? 472 Items
AnElectrical Engine Starter Parts Kit(PARTS KIT,ELECTRICAL ENGINE STARTER) is a parts kit for a STARTER, ENGINE, ELECTRICAL. Excludes PARTS KIT, ELECTRICAL CONTACT BRUSH HOLDER and BRUSH SET, ELECTRICAL CONTACT.
What is an Engine Generator Parts Kit? 415 Items
AnEngine Generator Parts Kit(PARTS KIT,ENGINE GENERATOR) is excludes PARTS KIT, ELECTRICAL CONTACT BRUSH HOLDER and BRUSH SET, ELECTRICAL CONTACT.
PARTS KIT,ENGINE GENERATOR REGULATOR 40 Items
What is an Ignition Distributor Parts Kit? 134 Items
AnIgnition Distributor Parts Kit(PARTS KIT,IGNITION DISTRIBUTOR) is excludes CONTACT SET, DISTRIBUTOR.
PARTS KIT,IGNITION MAGNETO 82 Items
What is an Ignition Coil Vibrator? 95 Items
AnIgnition Coil Vibrator(VIBRATOR,IGNITION COIL) is an item which rapidly interrupts the current to an ignition coil or magneto. It may include capacitor(s), relay(s), and/or resistor(s). It does not include ignition system distributors or timers. For items which perform similar functions, but are a part of ignition coils, see ARMATURE, INDUCTION COIL.
What is a Starting Coil? 137 Items
AStarting Coil(COIL,STARTING) is an item designed to increase the output of induction coils, ignition coils or magnetos during engine cranking periods by being connected as an auxiliary inductive load in the primary circuit of the induction coil, ignition coil or magneto. The increase is due to an induced current surge when the current is interrupted by another item such as timer, distributor or vibrator. It does not include a vibrator but may include relays, resistors and capacitors. Includes single and multiple units.
What is an Air Turbine Driven Engine Starter-Generator? 21 Items
AnAir Turbine Driven Engine Starter-Generator(STARTER-GENERATOR,ENGINE,AIR TURBINE DRIVEN) is a compact unit consisting primarily of an air turbine driven starter, a planetary gear system, a hollow shaft kilovolt amperes generator, and an integral control system. It may include a power take-off for driving hydraulic pumps, and the like. It is designed to start turbine engines and supply electrical power. For an electrically powered starter and generator, see STARTER-GENERATOR, ENGINE.
What is a Nonimmersion Type Electrical Heating Element? 14 Items
ANonimmersion Type Electrical Heating Element(HEATING ELEMENT,ELECTRICAL,NONIMMERSION TYPE) is an electrical device in the form of a resistor consisting of a resistance wire, an insulating material, and may be sheathed. Includes infrared elements. It is designed to transform electrical current into heat. It may include an automatic control to regulate the amount of heat generated.
What is a Neutral Start Safety Switch? 135 Items
ANeutral Start Safety Switch(SWITCH,SAFETY,NEUTRAL START) is an item designed to prevent engine starting unless the automatic transmission is in a neutral or locked position. The item is mounted on or near a gear shifting mechanism and is mechanically actuated. It may include wires and terminal connectors.
PARTS KIT,IGNITION COIL 18 Items
PARTS KIT,SOLENOID PLUNGER 21 Items
PARTS KIT,STARTER DRIVE 113 Items
What is a Belt Tension Adjusting Arm? 371 Items
ABelt Tension Adjusting Arm(ARM,ADJUSTING,BELT TENSION) is an item of rigid construction designed to be firmly attached at one end and slotted at the other end. It is used to facilitate tension adjustment of the drive belt on automotive type generators or other belt driven accessories.
What is an Ignition Armature? 31 Items
AnIgnition Armature(ARMATURE,IGNITION) is a circular device attached to the inside of a distributor shaft or base. Designed to interrupt the circuit between the armature spoke and the magnetic pick-up coil. Contains the same number of teeth or spokes equal to the number of engine cylinders. It is a component of a solid state ignition system designed for gasoline powered engines.
What is an Ignition Modulator Assembly? 273 Items
AnIgnition Modulator Assembly(MODULATOR ASSEMBLY,IGNITION) is an electronic device containing a transistor and various other electrical control devices designed to turn the current on and off in a primary circuit and automatically control the dwell period. It is a component of a solid state ignition system designed for gasoline powered engines.
What is an Ignition Stator Assembly? 191 Items
AnIgnition Stator Assembly(STATOR ASSEMBLY,IGNITION) is an item designed to signal an electronic module to trigger the coil primary circuit. May include items such as magnetic pick-up coil (breakerless), mounting base plate, wires and/or connector(s) and the like. It is a component of a solid state ignition system designed for gasoline powered engines.
What is a Distributor Ignition Control? 38 Items
ADistributor Ignition Control(CONTROL,DISTRIBUTOR IGNITION) is a mechanism designed to control ignition timing of the distributor by vacuum advancement in relation to engine speed requirements. May be linked to the distributor breaker plate or the distributor housing.
What is an Emission Control Exhaust Gas Recirculating Delay Solenoid? 11 Items
AnEmission Control Exhaust Gas Recirculating Delay Solenoid(DELAY SOLENOID,EXHAUST GAS RECIRCULATING,EMISSION CONTROL) is a devise, which allows vacuum signal to circulate through the Coolant Control Exhaust Gas Recirculating (CCEGR) valve, depending on engine temperature, to the Exhaust Gas Recirculating (EGR) valve. It is designed to assist in the prevention of unburned hydrocarbons from entering the atmosphere through the vehicle's exhaust system.
What is a Belt-Chain Tension Adjusting Device? 442 Items
ABelt-Chain Tension Adjusting Device(ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is an Engine Ignition Lead Set? 214 Items
AnEngine Ignition Lead Set(LEAD SET,IGNITION,ENGINE) is consists of two or more LEAD, IGNITION, ENGINE. Specifically designed to accommodate engine electrical ignition systems. Ends must be processed or terminated, with or without end boots, universal or custom fitted. Excludes LEAD SET, TEST.
What is an Engine Ignition Lead? 916 Items
AnEngine Ignition Lead(LEAD,IGNITION,ENGINE) is a single solid or braided conductive wire designed for engine ignition, with or without noise suppression cores. The conductor is composed of metallic materials or such nonmetallic materials as graphite impregnated fibers and plastics. Both ends must be processed or terminated, with or without boots. The lead may be of any size or shape. Includes items with metal braided outer covers and grounding nuts. Excludes LEAD, ELECTRICAL; LEAD, STORAGE BATTERY; and items having attached switches, lampholders, suppressors, resistors, and the like.
What is an Armature Assembly? 113 Items
AnArmature Assemblyis the rotating part of an electrical rotating machine which consists of the ARMATURE (as modified) and bearings mounted on a common shaft.
What is a Rotor Assembly? 259 Items
ARotor Assemblyis the rotating part of an electrical rotating machine which consists of a ROTOR (as modified) and bearings mounted on a common shaft.
What is an Armature-Rotor Assembly? 29 Items
AnArmature-Rotor Assemblyis the rotating parts of an electrical rotating machine which consists of an ARMATURE (as modified), ROTOR (as mofified) and bearings mounted on a common shaft. See also ARMATURE ASSEMBLY, and ROTOR ASSEMBLY.
SPARK ADVANCE,ELECTRONIC,IGNITION SYSTEM 19 Items
What is an Engine Accessories Modification Kit? 666 Items
AnEngine Accessories Modification Kit(MODIFICATION KIT,ENGINE ACCESSORIES) is an item or group of items employed to modify all engine accessories.
COVER,GLOW PLUG 12 Items
What is an Emission Control Engine Coolant Temperature Sensor? 223 Items
AnEmission Control Engine Coolant Temperature Sensor(SENSOR,ENGINE COOLANT TEMPERATURE,EMISSION CONTROL) is a metallic and/or non-metallic device with various ports on one end and a wrenching facility between ends. The opposite end may be threaded and contain a temperature probe. It is normally located on the upper engine block, on the water jacket or screwed into the upper radiator tank. Depending on individual temperature calibration it opens or closes various ports in order to channel manifold vacuum to devices which activate, de-activate or modify functions in fuel economy, cold temperature override, thermal ignition control, exhaust gas recirculation and other systems by sensing engine water temperature.
What is a Heat Suppressor? 20 Items
AHeat Suppressor(SUPPRESSOR,HEAT) is a device that surrounds an engine (as modified) for the purpose of blocking heat waves and protects the engine from being detected by infrared devices.
What is a Breakerless Ignition Control Unit? 38 Items
ABreakerless Ignition Control Unit(CONTROL UNIT,BREAKERLESS IGNITION) is a control unit which provides the firing capability to the ignition system of a gasoline engine.
What is an Electrical Terminal Block? 634 Items
AnElectrical Terminal Block(TERMINAL BLOCK,ELECTRICAL) is an item consisting of insulating material, which is specifically designed to have fastened terminals such as threaded screws and/or studs. Item may include embedded capacitors, attached ground wire, and mounting facilities. It is a component part of a STARTER-GENERATOR, ENGINE. Excludes TERMINAL BOARD; and TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Ignition Coil Cap? 17 Items
AnIgnition Coil Cap(CAP,COIL,IGNITION) is an item specifically designed to fit into/over an opening(s) on the enclosure of a COIL, IGNITION. It's primary purpose is to provide mechanical protection and/or prevent the entrance of foreign matter during equipment operation. It may or may not include a predrilled access hole to retain or support a power cable.
What is an Electrical Engine Starter Engagement Rod? 13 Items
AnElectrical Engine Starter Engagement Rod(ENGAGEMENT ROD,ELECTRICAL ENGINE STARTER) is a usually slim, metallic item which, driven by the armature of the engaging relay, presses the pinion against the flywheel ring gear via a drive spindle. Its ends may be equipped with additional parts.
What is a Nonaircraft Engine Starter-Generator? 105 Items
ANonaircraft Engine Starter-Generator(STARTER-GENERATOR,ENGINE,NONAIRCRAFT) is a rotating machine which is an accessory to and directly cranks a nonaircraft engine and subsequently generates direct current. The generator and starter action is not simultaneous. See also STARTER,ENGINE,ELECTRICAL and GENERATOR,ENGINE ACCESSORY. Excludes STARTER-GENERATOR,ENGINE,AIR TURBINE DRIVEN.
What is an Ignition Distributor Cam? 47 Items
AnIgnition Distributor Cam(CAM,IGNITION DISTRIBUTOR) is an item designed to convert rotary motion into reciprocating motion for the purpose of opening and closing electrical contacts in an ignition distributor.
What is a Magneto Cam? 32 Items
AMagneto Cam(CAM,MAGNETO) is an item designed to convert rotary motion into reciprocating motion for the purpose of opening and closing electrical contacts in a magneto.
What is a Magneto Coupling? 47 Items
AMagneto Coupling(COUPLING,MAGNETO) is an item specifically designed to couple or connect a magneto to a prime mover. Provides spark retardation and increased rotor acceleration during engine cranking period by means of momentary spring initiated impulses. Functions as a drive coupling at engine speed. It may include accessories such as key, setscrew or retainer(s).
What is an Electrical Starter Engine Drive? 715 Items
AnElectrical Starter Engine Drive(DRIVE,ENGINE,ELECTRICAL STARTER) is an item designed to transmit the torque developed by a starting motor to a reciprocating type internal combustion engine for the purpose of starting the engine. Clutching, meshing, and disengaging action may be accomplished either mechanically or by means of inertia.
What is an Engine Accessory Generator Set? 51 Items
AnEngine Accessory Generator Set(GENERATOR SET,ENGINE ACCESSORY) is a set which must consist of a GENERATOR,ENGINE ACCESSORY, and additional components, such as RECTIFIER,METALLIC: REGULATOR,ENGINE GENERATOR, and the like.
What is an Electrical Starter Engine Drive Housing? 268 Items
AnElectrical Starter Engine Drive Housing(HOUSING,ENGINE DRIVE,ELECTRICAL STARTER) is a machined item designed to support and/or protect the drive mechanism of an engine starter. It may include motor drive end bracket, bearing(s) and retainer(s).
What is an Ignition Distributor Housing? 71 Items
AnIgnition Distributor Housing(HOUSING,IGNITION DISTRIBUTOR) is the outer component of an ignition distributor designed to support or partially support the operating mechanism. It may include bearings, oilers, cap fasteners and/or mounting facilities.
What is a Magneto Housing? 42 Items
AMagneto Housing(HOUSING,MAGNETO) is the outer component of a magneto designed to support the operating mechanism. It may include pole-pieces, magnets, bearings, ventilating louvers and/or mounting facilites.
What is an Ignition Distributor Weight? 40 Items
AnIgnition Distributor Weight(WEIGHT,IGNITION DISTRIBUTOR) is a weight, which by centrifugal force, is used to automatically change the position of an electrical contact breaker cam in an ignition distributor.
What is an Ignition Contact Breaker Plate? 154 Items
AnIgnition Contact Breaker Plate(PLATE,IGNITION CONTACT BREAKER) is an item generally circular in shape with basic thickness small in relation to the diameter. Includes holes, staked posts and/or protrusions used to position and support the electrical contacts of an ignition system. May include capacitor(s) and electrical contacts.
What is a Glow Plug Controller? 20 Items
AGlow Plug Controller(CONTROLLER,GLOW PLUG) is a device designed to provide electrical current to the GLOW PLUG for a predetermined time to allow the the GLOW PLUG to reach the required temperature for starting an ENGINE, DIESEL. It may also operate after engine starting (post-heating). Excludes CIRCUIT CARD ASSEMBLY.
What is an Electronic Starter Regulator-Control? 14 Items
AnElectronic Starter Regulator-Control(REGULATOR-CONTROL,STARTER,ELECTRONIC) is an item designed for the electronic regulating and controlling of a STARTER (as modified). It provides a power supply and various electronic signals necessary for the starter. Excludes CONTROL UNIT, SUPERVISORY, ENGINE STARTER.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
What is an Engine Ignition System? 13 Items
AnEngine Ignition System(IGNITION SYSTEM,ENGINE) is a system used to generate and to deliver the distribution of electrical energy to ignite the air/fuel mixture in an internal combustion engine. It may include one or several COIL,IGNITION; LEAD,IGNITION,ENGINE; ELBOW,IGNITION TERMINAL,AIRCRAFT; ELBOW,IGNITION TERMINAL,NONAIRCRAFT, and the like. It may also include a DISTRIBUTOR,IGNITION SYSTEM and an electronic control module.
What is an Axial Fan Impeller? 1252 Items
AnAxial Fan Impeller(IMPELLER,FAN,AXIAL) is an item with blades or vanes equally spaced radially around the periphery of a hub, flange, or rotor. It is the rotating part of an axial type fan, electric motor, generator, and the like which creates a flow of air or gas parallel to the axis of rotation.
What is a Centrifugal Pump Impeller? 686 Items
ACentrifugal Pump Impeller(IMPELLER,PUMP,CENTRIFUGAL) is an item consisting of blades or paddles equally spaced around the periphery of a hub, rotor, or wheel. It is the rotating part of a PUMP, CENTRIFUGAL.
PARTS KIT,ENGINE WATER PUMP 851 Items
What is an Engine Coolant Radiator? 3327 Items
AnEngine Coolant Radiator(RADIATOR,ENGINE COOLANT) is a heat transfer device having a tank(s) and core(s) specifically designed to reduce the temperature of the liquid in an internal combustion engine cooling system. Excludes engine oil cooler radiators.
What is a Fluid Cooler Manifold? 643 Items
AFluid Cooler Manifold(MANIFOLD,FLUID COOLER) is a single piece or sectional item, either cast, molded, or pipe constructed, having multiple threaded, flanged, and/or hose inlet and outlet connections. Designed for directing and/or collecting the flow to or from core sections of a fluid cooler.
What is a Filler Opening Cap? 1965 Items
AFiller Opening Cap(CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is an Engine Coolant Radiator Shutter? 86 Items
AnEngine Coolant Radiator Shutter(SHUTTER,RADIATOR,ENGINE COOLANT) is a mechanical device having adjustable blades set in a frame which permits the passage of air through a radiator of an internal combustion engine. It may include various controls, manual or power operated control linkage and springs. See also GRILLE, METAL and VENTILATOR, AIR CIRCULATING.
What is a Radiator Core? 399 Items
ARadiator Core(CORE,RADIATOR) is a heat transfer device, minus tank(s) specifically designed to reduce the temperature of a liquid or radiate heat from an internal combustion engine cooling system. Excludes CORE ASSEMBLY, FLUIDS COOLER; and CORE ASSEMBLY, FLUID HEATER, INDUSTRIAL.
What is an Engine Water Inlet Parts Kit? 31 Items
AnEngine Water Inlet Parts Kit(PARTS KIT,ENGINE WATER INLET) is a parts kit used to repair an engine cooling water inlet.
What is an Oil Cooler Parts Kit? 55 Items
AnOil Cooler Parts Kit(PARTS KIT,OIL COOLER) is a parts kit used to repair an oil cooler.
PARTS KIT,RADIATOR 63 Items
What is an Engine Lubricating Oil Cooler? 1697 Items
AnEngine Lubricating Oil Cooler(COOLER,LUBRICATING OIL,ENGINE) is a heat transfer device specifically designed to remove heat from lubricating oil to lower its temperature. Excludes radiators.
What is a Fan Clutch Hub? 188 Items
AFan Clutch Hub(HUB,FAN CLUTCH) is a hub designed to be mounted and secured directly to a fan clutch and retain on its body a fan.
What is an Engine Cooling System Pump? 2201 Items
AnEngine Cooling System Pump(PUMP,COOLING SYSTEM,ENGINE) is a power driven item specifically designed to circulate water mixed with antifreeze and the like through the block and radiator for cooling. May include items such as pulley; coupling; gear and the like. Excludes PUMP (as modified).
What is an Engine Fan Clutch? 181 Items
AnEngine Fan Clutch(CLUTCH,FAN,ENGINE) is a device designed to deliver variable fan speeds to the engine pulley ratios responsive to the cooling demands of the engine. May include hub, mounting device, thermal air valve and the like. Excludes; FLUID COUPLING.
What is an Oil Cooler Housing? 115 Items
AnOil Cooler Housing(HOUSING,OIL COOLER) is an item designed to inclose, support, or protect the internal parts of the COOLER, LUBRICATING OIL, ENGINE.
What is a Radiator Fan Shroud? 777 Items
ARadiator Fan Shroud(SHROUD,FAN,RADIATOR) is an item designed to be bolted to the radiator core to disperse direct air circulation to pass over the engine, may provide a guard for the fan blades. May include bolts and the like.
What is an Overflow Radiator Tank? 796 Items
AnOverflow Radiator Tank(TANK,RADIATOR,OVERFLOW) is a container which depending on the pressure ratios in a RADIATOR, ENGINE COOLANT holds the coolant overflowing from the cooling system or conducts it back to the cooling system. The item may be equipped with a safety relief valve and/or a filler neck.
What is an Engine Water Outlet? 583 Items
AnEngine Water Outlet(WATER OUTLET,ENGINE) is an item designed to allow the flow of coolant out of the block to the radiator. May be lip and/or bolt flange.
What is a Belt-Chain Tension Adjusting Device? 442 Items
ABelt-Chain Tension Adjusting Device(ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Fluid Cooler Core Assembly? 428 Items
AFluid Cooler Core Assembly(CORE ASSEMBLY,FLUID COOLER) is an assembled unit which may consist of tubes, tube sheets, baffles and fins which comprise the basic heat transfer element of a COOLER, FLUID, TRANSMISSION and COOLER, FLUID, INDUSTRIAL. Excludes automotive radiators.
What is an Engine Coolant Pump Housing? 255 Items
AnEngine Coolant Pump Housing(HOUSING,COOLANT PUMP,ENGINE) is a housing designed to enclose the internal parts of a cooling system with inlet and outlet ports and specified bores to accommodate specific component parts. For items containing a shaft, gear, bearings and the like see PUMP, COOLING SYSTEM, ENGINE. Excludes HOUSING, LIQUID PUMP.
SUPPORT ASSEMBLY,RADIATOR,VEHICULAR 213 Items
PARTS KIT,FAN RADIATOR 29 Items
ADAPTER,OIL COOLER,ENGINE 60 Items
PLATE,OIL COOLER,ENGINE 61 Items
SIDEMEMBER,RADIATOR 21 Items
SHELL,RADIATOR,VEHICULAR 230 Items
What is a Radiator Baffle? 135 Items
ARadiator Baffle(BAFFLE,RADIATOR) is a metallic or nonmetallic plate of various length(s) and width(s) with bolt holes. It is designed to be mounted in various places around the radiator to eliminate wind noise in and around the radiator mounting area.
What is a Radiator Retainer? 207 Items
ARadiator Retainer(RETAINER,RADIATOR) is a rigid item of various shapes designed to position and/or restrain movement of a radiator. Excludes engine oil cooler radiators.
What is a Fan Clutch Engine Parts Kit? 21 Items
AFan Clutch Engine Parts Kit(PARTS KIT,ENGINE,FAN CLUTCH) is a parts kit used to repair an ENGINE FAN CLUTCH. It may consist of a seal cap assembly, O-Rings, clutch pad, bearings, lock nut, spacer(s), sleeve and the like.
What is an Engine Coolant Radiator Blind Roller? 17 Items
AnEngine Coolant Radiator Blind Roller(ROLLER,BLIND,RADIATOR,ENGINE COOLANT) is a flat item generally made of a fabric or plastic material which is fastened to a roll and which may be mounted in a frame. It is designed to control the air flow to the radiator. For items having adjustable blades set in a frame see SHUTTER, RADIATOR, ENGINE COOLANT.
What is an Engine Coolant Pump Housing Section? 113 Items
AnEngine Coolant Pump Housing Section(HOUSING SECTION,COOLANT PUMP,ENGINE) is a rigid item of different shapes which together with at least one more housing section forms a HOUSING (2), COOLANT PUMP, ENGINE.
What is an Engine Cooling System Blower? 402 Items
AnEngine Cooling System Blower(BLOWER,ENGINE COOLING SYSTEM) is an item used for forced-air ventilation of an engine cooling system. It has an axial impeller which may have casing and is driven by an electric motor, a v-belt or directly by the crankshaft. A CLUTCH, FAN, ENGINE may be included.
What is an Engine Cooling System Water Pump Impeller? 297 Items
AnEngine Cooling System Water Pump Impeller(IMPELLER,WATER PUMP,ENGINE COOLING SYSTEM) is an item consisting of blades or vanes equally spaced around the periphery of a hub, rotor, or wheel. It is the rotating part of a PUMP, COOLING SYSTEM, ENGINE.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
What is an Intake Air Cleaner? 3645 Items
AnIntake Air Cleaner(AIR CLEANER,INTAKE) is a device designed to prevent foreign particles from entering the air intake system of an internal combustion engine or air compressor. Excludes mufflers.
PARTS KIT,SEDIMENT BOWL 21 Items
What is a Fluid Filter Cover? 642 Items
AFluid Filter Cover(COVER,FLUID FILTER) is a rigid item of various shapes designed as a component of a fluid filter, acting as the cover and retaining the filter element in place. The item does not have an inlet or outlet connection. It is fastened onto the FILTER BODY, FLUID by means of clamps or bolts. For items with inlet and/or outlet connections, see HEAD, FLUID FILTER.
What is a Fluid Filter Head? 942 Items
AFluid Filter Head(HEAD,FLUID FILTER) is a component of a fluid filter designed to contain the inlet and/or outlet ports of the filter. It acts as a cover and attaches to the fluid filter body or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, by-pass valves, and/or fluid filter element(s). It may have means for supporting the filter element(s), and means for mounting the filter. Excludes HEAD, SEDIMENT STRAINER and COVER, FLUID FILTER.
What is a Sediment Strainer Head? 74 Items
ASediment Strainer Head(HEAD,SEDIMENT STRAINER) is a component of a sediment strainer designed to contain the inlet and/or outlet ports of the strainer. It acts as a cover and attaches to the BOWL, SEDIMENT or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, and/or by-pass valves, means for supporting the strainer element, and means for mounting the strainer. The item does not include a strainer element. Excludes HEAD, FLUID FILTER.
What is a Fluid Filter Body? 1133 Items
AFluid Filter Body(FILTER BODY,FLUID) is a component of a FILTER, FLUID designed to contain the FILTER ELEMENT, FLUID and attach to the HEAD, FLUID FILTER or the COVER, ACCESS. It may have inlet and/or outlet connections, means for mounting a drain plug(s), check, relief and or by-pass valves. Excludes BOWL, SEDIMENT.See also STRAINER BODY, SEDIMENT.
What is a Fluid Filter? 6444 Items
AFluid Filter(FILTER,FLUID) is a filter having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. For spin-on, base-mounted filtering devices with integral outer casings, see FILTER ELEMENT, FLUID. Excludes AIR CONDITIONER.
What is a Fluid Filter Assembly? 433 Items
AFluid Filter Assembly(FILTER ASSEMBLY,FLUID) is two or more FILTER, FLUID on a common mounting or mounted on each other. They may be separable and operate in series, parallel, or individually.
What is a Fluid Filter Element? 9011 Items
AFluid Filter Element(FILTER ELEMENT,FLUID) is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
What is a Sediment Bowl? 410 Items
ASediment Bowl(BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is an Air Cleaner Intake Pipe Cap? 150 Items
AnAir Cleaner Intake Pipe Cap(CAP,AIR CLEANER INTAKE PIPE) is a cap that shields the air cleaner intake pipe from rain, snow, and large particles of foreign matter such as twigs, hay, straw, and the like. It also confines the oil spray from the oil bath air cleaner when the engine backfires or rollback occurs.
PARTS KIT,AIR CLEANER BRACKET 10 Items
What is an Air Filter Parts Kit? 198 Items
AnAir Filter Parts Kit(PARTS KIT,AIR FILTER) is a collection of items used to repair/replace air filters. May include mounting hardware. Excludes PARTS KIT (1),BRAKE CHAMBER.
PARTS KIT,SEDIMENT STRAINER 28 Items
What is an Intake Air Cleaner Deflector? 125 Items
AnIntake Air Cleaner Deflector(DEFLECTOR,AIR CLEANER,INTAKE) is a generally metallic item of various shapes designed to deflect an airflow into or away from the intake air cleaner of a combustion engine/compressor. Excludes DEFLECTOR, AIRFLOW.
What is an Engine Accessories Modification Kit? 666 Items
AnEngine Accessories Modification Kit(MODIFICATION KIT,ENGINE ACCESSORIES) is an item or group of items employed to modify all engine accessories.
CAP ASSEMBLY,AIR CLEANER 225 Items
What is an Intake Air Cleaner Filter Body? 409 Items
AnIntake Air Cleaner Filter Body(FILTER BODY,INTAKE AIR CLEANER) is a part of an AIR CLEANER, INTAKE designed as a housing for a FILTER ELEMENT, INTAKE AIR CLEANER. Depending on the configuration, the item may be mounted at the top, the bottom or by means of a flanking flange. In general, the housing is a multipiece item and has air intake and air outlet.
What is a Vehicular Engine Filter Warning Indicator? 297 Items
AVehicular Engine Filter Warning Indicator(INDICATOR,FILTER WARNING,VEHICULAR ENGINE) is a mechanical indicator used on vehicular engines for dry or liquid type clearners to provide a visual warning signal when filter needs cleaning or changing.
What is an Intake Air Cleaner Filter Element? 4390 Items
AnIntake Air Cleaner Filter Element(FILTER ELEMENT,INTAKE AIR CLEANER) is a replaceable device designed to remove dust, pollen or other foreign matter from the air passing through it. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, or the like. It is designed to fit into an AIR CLEANER,INTAKE.
What is a Fluid Filtering Disk? 154 Items
AFluid Filtering Disk(FILTERING DISK,FLUID) is a flat, circular, replaceable device, with or without a centrally located hole, designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous, fibrous or shredded material (metallic or non-metallic) which retains the solid particles in the fluid passing through it. It may be encased and used as a single item or stacked to form a fluid filter element. Excludes DISK, SOLID, PLAIN; DIAPHRAGM (as modified); STRAINER ELEMENT, SEDIMENT; and WIRE FABRIC.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
What is a Centrifugal Pump Impeller? 686 Items
ACentrifugal Pump Impeller(IMPELLER,PUMP,CENTRIFUGAL) is an item consisting of blades or paddles equally spaced around the periphery of a hub, rotor, or wheel. It is the rotating part of a PUMP, CENTRIFUGAL.
PARTS KIT,ENGINE WATER PUMP 851 Items
What is an Engine Coolant Radiator? 3327 Items
AnEngine Coolant Radiator(RADIATOR,ENGINE COOLANT) is a heat transfer device having a tank(s) and core(s) specifically designed to reduce the temperature of the liquid in an internal combustion engine cooling system. Excludes engine oil cooler radiators.
What is a Fluid Cooler Manifold? 643 Items
AFluid Cooler Manifold(MANIFOLD,FLUID COOLER) is a single piece or sectional item, either cast, molded, or pipe constructed, having multiple threaded, flanged, and/or hose inlet and outlet connections. Designed for directing and/or collecting the flow to or from core sections of a fluid cooler.
What is a Wearing Ring? 146 Items
AWearing Ring(RING,WEARING) is a cylindrical item with or without flange(s), designed to be inserted in a pump casing or secured to the impeller of a centrifugal pump. It is used for the purpose of providing a close running clearance between the impeller and casing in order to prevent or overcome leakage due to erosion. It may also be used as a diffuser ring in the suction and discharge throats of valves.
What is a Filler Opening Cap? 1965 Items
AFiller Opening Cap(CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is an Oil Cooler Parts Kit? 55 Items
AnOil Cooler Parts Kit(PARTS KIT,OIL COOLER) is a parts kit used to repair an oil cooler.
What is an Engine Lubricating Oil Cooler? 1697 Items
AnEngine Lubricating Oil Cooler(COOLER,LUBRICATING OIL,ENGINE) is a heat transfer device specifically designed to remove heat from lubricating oil to lower its temperature. Excludes radiators.
What is an Oil Cooler Housing? 115 Items
AnOil Cooler Housing(HOUSING,OIL COOLER) is an item designed to inclose, support, or protect the internal parts of the COOLER, LUBRICATING OIL, ENGINE.
What is a Radiator Retainer? 207 Items
ARadiator Retainer(RETAINER,RADIATOR) is a rigid item of various shapes designed to position and/or restrain movement of a radiator. Excludes engine oil cooler radiators.
What is an Engine Coolant Radiator Blind Roller? 17 Items
AnEngine Coolant Radiator Blind Roller(ROLLER,BLIND,RADIATOR,ENGINE COOLANT) is a flat item generally made of a fabric or plastic material which is fastened to a roll and which may be mounted in a frame. It is designed to control the air flow to the radiator. For items having adjustable blades set in a frame see SHUTTER, RADIATOR, ENGINE COOLANT.
What is an Aircraft Engine Tube Assembly? 878 Items
AnAircraft Engine Tube Assembly(TUBE ASSEMBLY,AIRCRAFT ENGINE) is an aircraft engine component designed to convey fluid. It may be bent or straight, flexible or rigid. It may include fittings to join one or more tubes together. For tube assembly designed to convey fuel from the cell or tank to the engine, see: FUEL LINE,AIRCRAFT.
GOVERNOR,GASOLINE ENGINE 340 Items
What is a Float Carburetor? 1163 Items
AFloat Carburetor(CARBURETOR,FLOAT) is a carburetor utilizing one or more floats to maintain a constant liquid level.
CARBURETOR,PRESSURE INJECTION 109 Items
What is a Valve Float? 48 Items
AValve Float(FLOAT,VALVE) is a floatation device used to actuate an inlet or outlet valve. It may be airtight and hollow, or of solid construction. Excludes floats designed for carburetors.
What is a Centrifugal Pump Impeller? 686 Items
ACentrifugal Pump Impeller(IMPELLER,PUMP,CENTRIFUGAL) is an item consisting of blades or paddles equally spaced around the periphery of a hub, rotor, or wheel. It is the rotating part of a PUMP, CENTRIFUGAL.
What is a Linear Electro-Mechanical Actuator? 290 Items
ALinear Electro-Mechanical Actuator(ACTUATOR,ELECTRO-MECHANICAL,LINEAR) is a self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of linear (straight line) mechanical movement. Comprised of an electrical motor(s), gear box(es), screwjacks, limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.
What is a Rotary Electro-Mechanical Actuator? 236 Items
ARotary Electro-Mechanical Actuator(ACTUATOR,ELECTRO-MECHANICAL,ROTARY) is a self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of torque (rotational mechanical movement). Comprised of an electric motor(s), gear box(es), limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.
What is a Pressure Regulating Pump Governor? 106 Items
APressure Regulating Pump Governor(GOVERNOR,PUMP,PRESSURE REGULATING) is a governor specifically designed to regulate the discharge pressure of reciprocating or turbine driven pumps. It may be actuated by either the pump discharge fluid or air flow from an external pilot valve.
What is an Aircraft Fuel Tank Float Valve? 235 Items
AnAircraft Fuel Tank Float Valve(VALVE,FLOAT,AIRCRAFT FUEL TANK) is a valve specifically designed to control the fuel level in an aircraft fuel tank, such as during aircraft refueling and/or defueling operations. It may include solenoids to permit remote control of the valve.
PARTS KIT,CARBURETOR 723 Items
PARTS KIT,ENGINE FUEL PUMP 555 Items
PARTS KIT,GASOLINE ENGINE GOVERNOR 57 Items
What is a Metering And Distributing Fuel Pump Parts Kit? 291 Items
AMetering And Distributing Fuel Pump Parts Kit(PARTS KIT,METERING AND DISTRIBUTING FUEL PUMP) is a parts kit used for replacing the worn and/or broken parts of a PUMP, FUEL, METERING AND DISTRIBUTING.
PARTS KIT,THROTTLE SLAVE CYLINDER 13 Items
What is a Cam Actuated Fuel Pump? 1521 Items
ACam Actuated Fuel Pump(PUMP,FUEL,CAM ACTUATED) is a device designed to transfer liquid fuel from a tank to a carburetor, or fuel injector metering and distribution pump of an internal combustion engine. Reciprocating motion of the diaphragm(s) is actuated through linkage from the engine camshaft. It may include a diaphragm actuated vacuum booster. Excludes electrical and rotor type engine fuel pumps.
What is a Fluid Filter Cover? 642 Items
AFluid Filter Cover(COVER,FLUID FILTER) is a rigid item of various shapes designed as a component of a fluid filter, acting as the cover and retaining the filter element in place. The item does not have an inlet or outlet connection. It is fastened onto the FILTER BODY, FLUID by means of clamps or bolts. For items with inlet and/or outlet connections, see HEAD, FLUID FILTER.
What is a Fluid Filter Head? 942 Items
AFluid Filter Head(HEAD,FLUID FILTER) is a component of a fluid filter designed to contain the inlet and/or outlet ports of the filter. It acts as a cover and attaches to the fluid filter body or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, by-pass valves, and/or fluid filter element(s). It may have means for supporting the filter element(s), and means for mounting the filter. Excludes HEAD, SEDIMENT STRAINER and COVER, FLUID FILTER.
What is a Sediment Strainer Head? 74 Items
ASediment Strainer Head(HEAD,SEDIMENT STRAINER) is a component of a sediment strainer designed to contain the inlet and/or outlet ports of the strainer. It acts as a cover and attaches to the BOWL, SEDIMENT or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, and/or by-pass valves, means for supporting the strainer element, and means for mounting the strainer. The item does not include a strainer element. Excludes HEAD, FLUID FILTER.
What is a Fluid Filter Body? 1133 Items
AFluid Filter Body(FILTER BODY,FLUID) is a component of a FILTER, FLUID designed to contain the FILTER ELEMENT, FLUID and attach to the HEAD, FLUID FILTER or the COVER, ACCESS. It may have inlet and/or outlet connections, means for mounting a drain plug(s), check, relief and or by-pass valves. Excludes BOWL, SEDIMENT.See also STRAINER BODY, SEDIMENT.
What is an Aircraft Submerged Pump? 419 Items
AnAircraft Submerged Pump(PUMP,SUBMERGED,AIRCRAFT) is a completely inclosed machine consisting of a positive or nonpositive displacement pump with a driving motor used to transmit or transfer fluid from an aircraft tank to an engine driven pump or to another tank. It is designed to be partially or completely submerged in the fluid it is intended to pump.
What is an Aircraft Submerged Pump Assembly? 68 Items
AnAircraft Submerged Pump Assembly(PUMP ASSEMBLY,SUBMERGED,AIRCRAFT) is a completely inclosed machine consisting of two or more positive or nonpositive displacement pumps with a common driving motor used to transmit or transfer fluid from an aircraft tank to an engine driven pump or to another tank. It is designed to be partially or completely submerged in the fluid it is intended to pump.
What is a Jet Engine Fuel Pump? 393 Items
AJet Engine Fuel Pump(PUMP,FUEL,JET ENGINE) is a device specifically designed to deliver fuel to a jet engine. The device may be of single/multistage and positive/nonpositive displacement design. It mounts on a jet engine accessory drive case or on the fuel control and is driven by the engine. Excludes all pumps not specifically designed to be used on a jet engine.
What is a Fluid Filter? 6444 Items
AFluid Filter(FILTER,FLUID) is a filter having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. For spin-on, base-mounted filtering devices with integral outer casings, see FILTER ELEMENT, FLUID. Excludes AIR CONDITIONER.
What is a Fluid Filter Element? 9011 Items
AFluid Filter Element(FILTER ELEMENT,FLUID) is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
What is a Sediment Bowl? 410 Items
ASediment Bowl(BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is an Electro-Mechanical Linear Actuator Parts Kit? 11 Items
AnElectro-Mechanical Linear Actuator Parts Kit(PARTS KIT,ELECTRO-MECHANICAL LINEAR ACTUATOR) is a parts kit used to repair an ACTUATOR, ELECTRO-MECHANICAL, LINEAR. Excludes PARTS KIT, LINEAR ACTUATING CYLINDER ASSEMBLY.
What is an Engine Primer Pump Parts Kit? 14 Items
AnEngine Primer Pump Parts Kit(PARTS KIT,ENGINE PRIMER PUMP) is a parts kit used to repair a PUMP, ENGINE PRIMING, HAND DRIVEN.
What is a Fuel Injection Nozzle Parts Kit? 88 Items
AFuel Injection Nozzle Parts Kit(PARTS KIT,FUEL INJECTION NOZZLE) is excludes PARTS KIT, FUEL INJECTOR DIESEL ENGINE.
What is a Valve Disk? 177 Items
AValve Disk(DISK,VALVE) is an item of various shapes (usually circular, conical, cylindrical, or rectangular) used to prevent or regulate the flow of liquids or gases through the valve. May include a retainer, screw, holder, and the like.
What is a Valve Cap? 136 Items
AValve Cap(CAP,VALVE) is a cap designed to mate with a fluid valve body. It may have an orifice through which a rod, shaft, stem, or an adjusting screw passes. For ported items, see HEAD, VALVE. Excludes CAP, PNEUMATIC VALVE.
What is a Valve Head? 28 Items
AValve Head(HEAD,VALVE) is an item designed to mate with a hydraulic or pneumatic valve body. It must have inlet and/or outlet port(s). For items without ports see CAP (1), VALVE.
What is a Fuel Injector Assembly? 1678 Items
AFuel Injector Assembly(INJECTOR ASSEMBLY,FUEL) is an item consisting of springs, o-rings, plungers and miscellaneous internal and external parts that provide atomized fuel at specific pressure(s) to engine combustion chambers. It may include NOZZLE, FUEL INJECTION.
What is a Valve Piston? 157 Items
AValve Piston(PISTON,VALVE) is a cylindrical item of various configurations which reciprocates in a valve body, assisting in the movement of the disk to open or close a valve. May include additional components such as ring(s), collar(s), spring(s) and the like. Excludes DISK, VALVE.
What is a Fuel Pump Housing? 377 Items
AFuel Pump Housing(HOUSING,FUEL PUMP) is an item designed to inclose, support or protect the internal parts of a fuel pump. It may be fabricated from a single casting or composed of two or more separate parts. Usually contains access holes to facilitate installation of component parts. May include access covers, busings, dowell plugs- and the like. Excludes: HOUSING, LIQUID PUMP.
What is a Fuel Control Parts Kit? 206 Items
AFuel Control Parts Kit(PARTS KIT,FUEL CONTROL) is a parts kit used to overhaul and/or repair FUEL CONTROLS, (as modified).
What is an Engine Fuel Component Adjustor? 253 Items
AnEngine Fuel Component Adjustor(ADJUSTOR,FUEL COMPONENT,ENGINE) is a regulating device threaded or unthreaded for the purpose of tuning the mechanism for which it is specifically designed. It may have a limiting collar, shoulder or slot. The rotating facility may be a hex head or collar, a slot or socket end. Excludes BOLT (as modified); screw (as modified); stud (as modified).
What is a Carburetor Nozzle? 1184 Items
ACarburetor Nozzle(NOZZLE,CARBURETOR) is an item generally of cylindrical shape with one or several bores which are designed to restrict the flow of fuel or air, respectively.
What is a Liquid Level Switch? 471 Items
ALiquid Level Switch(SWITCH,LIQUID LEVEL) is a switch which is actuated by a float or sensing device(s) to control liquid level and/or actuate visual or audible warning systems. It may include a relay controlled by the switch element. Excludes TRANSMITTER,LIQUID QUANTITY.
SPRAY TIP,NOZZLE,FUEL INJECTOR 307 Items
What is a Stem Fuel Injection Nozzle? 61 Items
AStem Fuel Injection Nozzleis a device, usually metallic used as a means to regulate the flow of liquids through a NOZZLE, FUEL INJECTION. Excludes STEM, FLUID VALVE; STEM, NEEDLE VALVE.
What is a Fuel Injector Holder? 369 Items
AFuel Injector Holder(HOLDER,FUEL INJECTOR) is an item specifically designed to house the nozzle injector and other component items that function as an entity in an INJECTOR ASSEMBLY, FUEL. May include hardware.
VALVE,FUEL MANIFOLD 80 Items
PLUNGER,FUEL INJECTOR 99 Items
PLUNGER ASSEMBLY,FUEL INJECTOR 87 Items
What is a Fuel System Valve? 806 Items
AFuel System Valve(VALVE,FUEL SYSTEM) is an item specifically designed to automatically/manually maintain outlet/inlet fuel.
What is an Engine Accessories Modification Kit? 666 Items
AnEngine Accessories Modification Kit(MODIFICATION KIT,ENGINE ACCESSORIES) is an item or group of items employed to modify all engine accessories.
ARM,GOVERNOR,FUEL PUMP 57 Items
What is a Special Shaped Actuator Valve Diaphragm? 195 Items
ASpecial Shaped Actuator Valve Diaphragm(DIAPHRAGM,ACTUATOR VALVE,SPECIAL SHAPED) is an item constructed of one or more layers of thin flexible material, either laminated or separated, designed to form a tight seal between the chambers of a valve, and to transmit pressure inducted motion to a valve disk either directly or through a mechanical linkage. The surface of the item must be formed or molded to have a beaded or rolled edge, ribs or any other raised surfaces. The item may contain bolt holes and/or center holes. Excludes DIAPHRA GM, VALVE, FLAT and GASKET.
What is a Fuel Nozzle Repair Kit? 25 Items
AFuel Nozzle Repair Kit(REPAIR KIT,FUEL NOZZLE) is a group of parts required for repairing or replacing worn parts of a NOZZLE, FUEL INSPECTION. It may contain tools.
What is an Engine Priming Pump Fuel Tank? 20 Items
AnEngine Priming Pump Fuel Tank(TANK,FUEL,ENGINE PRIMING PUMP) is an item designed to accommodate a measured amount of starting fuel and used as an integral part of a PUMP, ENGINE PRIMING, HAND DRIVEN.
What is a Fuel Control Housing? 137 Items
AFuel Control Housing(HOUSING,FUEL CONTROL) is a unit or component consisting of threaded inserts and other miscellaneous hardware. It is used on the main fuel control engine.
What is a Fuel Pump Metering And Distributing Camshaft? 113 Items
AFuel Pump Metering And Distributing Camshaft(CAMSHAFT,METERING AND DISTRIBUTING,FUEL PUMP) is a shaft with eccentric lobes, which operates the distributing fuel pump pistons of a PUMP, FUEL, METERING AND DISTRIBUTING.
What is a Metering And Distributing Fuel Pump Injection Control? 207 Items
AMetering And Distributing Fuel Pump Injection Control(INJECTION CONTROL,METERING AND DISTRIBUTING FUEL PUMP) is a usually mechanically functioning item encased in a housing. It is used to advance the delivery of a PUMP, FUEL, METERING AND DISTRIBUTING with increasing engine rotation so that, with higher rotational speed of the engine, optimal combustion is obtained. This result is achieved by giving the pump shaft a certain advance angle in relation to the motor shaft.
What is a Metering And Distributing Fuel Pump Cylinder Assembly? 107 Items
AMetering And Distributing Fuel Pump Cylinder Assembly(CYLINDER ASSEMBLY,METERING AND DISTRIBUTING FUEL PUMP) is an item generally consisting of a piston and a cylinder. The piston is driven by the camshaft of the PUMP, FUEL, METERING AND DISTRIBUTING and delivers the fuel to the NOZZLE, FUEL INJECTION.
What is a Fuel System Parts Kit? 209 Items
AFuel System Parts Kit(PARTS KIT,FUEL SYSTEM) is a parts kit which contains such items as hoses, valves, connectors, bushings, clamps and accessories for the repair of a FUEL SYSTEM.
What is a Pump Control Unit? 33 Items
APump Control Unit(CONTROL UNIT,PUMP) is an electronic unit that constantly monitors signals from high level, low level and fuel flow sensors in two or more TANK, FUEL, AIRCRAFT and automatically contorls one or more PUMP, SUBMERGED, AIRCRAFT to maintain necessary and/or optimum fuel flow.
What is a Power Turbine Governor Weight? 44 Items
APower Turbine Governor Weight(WEIGHT,GOVERNOR,POWER TURBINE) is a weight which operates in opposition to a spring, feedback mechanism, manual control or simular device and regualtes the servo valve to increase or decrease fuel flow during engine high power operation.
What is a Fuel Pump Housing Section? 116 Items
AFuel Pump Housing Section(HOUSING SECTION,FUEL PUMP) is a rigid metallic item of different forms, which together with at least one further housing section, forms a HOUSING, FUEL PUMP.
What is a Fuel Pump Hand Pump? 159 Items
AFuel Pump Hand Pump(PUMP,HAND,FUEL PUMP) is an item generally designed to be screwed into the housing of a PUMP, FUEL, CAM ACTUATED. It is used to fill the injection system of a combustion engine during start-up or refilling of pipes, or to vent the injection system after maintenance.
What is a Carburetor Needle Valve? 52 Items
ACarburetor Needle Valve(NEEDLE VALVE,CARBURETOR) is associated items, comprising a slender rod or needle fitting into a conical seat, designed to restrict the flow of fuel into the float chamber of a carburetor when the desired level is reached. See also NEEDLE, CARBURETOR NEEDLE VALVE and SEAT VALVE. Excludes NEEDLE, TAPERED, CARBURETOR.
What is a Carburetor Tapered Needle? 46 Items
ACarburetor Tapered Needle(NEEDLE,TAPERED,CARBURETOR) is a small needle designed to operate in a cylindrical bore or jet to give increased aperture with a greater lift. For items which are a component part of a NEEDLE VALVE, CARBURETOR see NEEDLE, CARBURETOR NEEDLE VALVE.
What is a Fuel System Valve Holder? 126 Items
AFuel System Valve Holder(HOLDER,VALVE,FUEL SYSTEM) is an item generally designed to accommodate and hold a VALVE, FUEL SYSTELM in a HOUSING, FUEL PUMP.
What is a Fuel Injector Assembly Insert? 85 Items
AFuel Injector Assembly Insert(INSERT,FUEL INJECTOR ASSEMBLY) is a mostly metallic cylindrical item installed between the NOZZLE,FUEL INJECTION and the HOLDER,FUEL INJECTOR. It limits the needle stroke and provides a metallic seal between nozzle and nozzle holder.
What is a Carburetor Body? 57 Items
ACarburetor Body(BODY,CARBURETOR) is an item designed to enclose and support the internal parts of a CARBURETOR (as modified).
What is a Governor Weights Carrier? 34 Items
AGovernor Weights Carrier(CARRIER,GOVERNOR WEIGHTS) is an item designed to carry the weights of a centrifugal governor.
What is a Fuel Pump Cover? 191 Items
AFuel Pump Cover(COVER,FUEL PUMP) is a cover designed to cover the internal working parts of a PUMP, FUEL (as modified). It does not have inlet or outlet connections.
What is an Aircraft Fuel System Separator And Recovery Unit? 16 Items
AnAircraft Fuel System Separator And Recovery Unit(SEPARATOR AND RECOVERY UNIT,FUEL SYSTEM,AIRCRAFT) is an item designed to recover fuel leaks and fuel smells, due to condensations, in the aircraft fuel system. It includes some inlet and outlet ports.
What is a Fuel Density Probe? 134 Items
AFuel Density Probe(PROBE,DENSITY,FUEL) is an item generally designed for mounting in an aircraft fuel tank. It is used to measure the fuel density during the flight.
What is an Aircraft Engine Filter Warning Indicator? 104 Items
AnAircraft Engine Filter Warning Indicator(INDICATOR,FILTER WARNING,AIRCRAFT ENGINE) is a mechnical indicator used on aircraft engine for dry or liquid type cleaners to provide a visual warning signal when a filter needs cleaning or changing.
What is a Fuel Control Temperature Compensator? 34 Items
AFuel Control Temperature Compensator(COMPENSATOR,TEMPERATURE,FUEL CONTROL) is an expandable accordion shaped item with a moving rod, which can expand or contract lineraly. It converts temperature effects into controlled linear movement of the rod which actuates fuel control adjusting device.
What is an Aircraft Engine Tube Assembly? 878 Items
AnAircraft Engine Tube Assembly(TUBE ASSEMBLY,AIRCRAFT ENGINE) is an aircraft engine component designed to convey fluid. It may be bent or straight, flexible or rigid. It may include fittings to join one or more tubes together. For tube assembly designed to convey fuel from the cell or tank to the engine, see: FUEL LINE,AIRCRAFT.
What is a Carburetor Float? 217 Items
ACarburetor Float(FLOAT,CARBURETOR) is a hollow, airtight device used to actuate an inlet valve for regulating the level of a liquid fuel in the bowl of a CARBURETOR,FLOAT. Excludes FLOAT,VALVE.
What is a Fuel Injection Nozzle? 2260 Items
AFuel Injection Nozzle(NOZZLE,FUEL INJECTION) is a spring loaded nozzle designed to meter and inject fuel at specific pressure(s) to engine fuel combustion chambers.
What is a Metering And Distributing Fuel Pump? 3621 Items
AMetering And Distributing Fuel Pump(PUMP,FUEL,METERING AND DISTRIBUTING) is a device specifically designed to (1) increase the pressure of, (2) meter the amount of, (3) control the distribution of liquid fuel received directly or indirectly from the TANK, FUEL, ENGINE to the individual air inlet tubes or combustion chambers of gasoline or diesel engines.
What is a Turbo-Jet Engine Fuel Flow Regulator? 88 Items
ATurbo-Jet Engine Fuel Flow Regulator(REGULATOR,FUEL FLOW,TURBO-JET ENGINE) is a regulator designed to automatically turn on the fuel and ignition at a specific percent of speed for starting a turbo-jet engine. At another speed, it cuts the ignition and places the fuel pumps in series operation. At still another fixed speed, it shuts off the compressor, bleeds and restores electronic devices to their normal circuits.
What is a Turbo-Prop Engine Fuel Flow Regulator? 229 Items
ATurbo-Prop Engine Fuel Flow Regulator(REGULATOR,FUEL FLOW,TURBO-PROP ENGINE) is a regulator designed to automatically turn on the fuel and ignition at a specific percent of speed for starting a turbo-prop engine. At another speed, it cuts the ignition and places the fuel pumps in series operation. At still another fixed speed, it shuts off the compressor, bleeds and restores electronic devices to their normal circuits.
What is a Degasser Valve? 80 Items
ADegasser Valve(VALVE,DEGASSER) is a dual purpose mechanical and electrical valve specifically designed to prevent entry of fuel into the intake manifold of an ENGINE, GASOLINE during a deceleration period and/or to stop an idling engine prior to turning off ignition. It is actuated by high manifold vacuum and by a solenoid energized by the operator's push button switch. See also VALVE, SOLENOID.
What is a Hand Driven Engine Priming Pump? 152 Items
AHand Driven Engine Priming Pump(PUMP,ENGINE PRIMING,HAND DRIVEN) is a positive displacement pump specifically designed to force a measured amount of fuel to the intake manifold or combustion chamber of an internal combustion engine. It is designed for mounting to a bulkhead or panel. It may be furnished with attaching fittings and/or spacers which control capacity. Excludes DISPENSING PUMP, HAND DRIVEN.
What is an Automatic Fuel-Air Mixture Control Valve? 72 Items
AnAutomatic Fuel-Air Mixture Control Valve(VALVE,FUEL-AIR MIXTURE CONTROL,AUTOMATIC) is an item designed to automatically control the fuel-air mixture of an injection carburetor by means of regulating impact air pressure to the regulator unit of a carburetor. It operates under varying conditions of air density as a result of changes in altitude and/or temperature.
What is a Turbine Engine Afterburner Fuel Control? 111 Items
ATurbine Engine Afterburner Fuel Control(FUEL CONTROL,AFTERBURNER,TURBINE ENGINE) is a self-contained metering unit consisting primarily of pumping, controlling, valving, and/or governing components. It is designed for regulating the delivery of afterburner fuel into a turbine engine.
What is a Turbine Engine Emergency Fuel Control? 42 Items
ATurbine Engine Emergency Fuel Control(FUEL CONTROL,EMERGENCY,TURBINE ENGINE) is a self-contained metering unit consisting primarily of pumping, controlling, valving, and/or governing components. It is designed for regulating the delivery of emergency fuel into a turbine engine.
What is a Turbine Engine Main Fuel Control? 1223 Items
ATurbine Engine Main Fuel Control(FUEL CONTROL,MAIN,TURBINE ENGINE) is a self contained metering unit consisting primarily of pumping, controlling, valving, and/or governing components. It is designed for regulating the delivery of fuel into the main fuel system of a turbine engine.
What is a Turbine Engine Starting Fuel Control? 67 Items
ATurbine Engine Starting Fuel Control(FUEL CONTROL,STARTING,TURBINE ENGINE) is a self-contained metering unit consisting primarily of pumping, controlling, valving, and/or governing components. It is designed for regulating the delivery of starting fuel into a turbine engine.
What is a Fuel Pressurizing And Drain Valve? 209 Items
AFuel Pressurizing And Drain Valve(VALVE,FUEL PRESSURIZING AND DRAIN) is an item that provides an automatic proportioning of fuel distribution to the engine fuel manifolds, under pressure, to achieve better fuel atomization at the fuel nozzles over a wide range of fuel flows. It must also provide a means of shutting off fuel supply to the engine and draining the fuel manifold after engine shutdown. It must be spring loaded and is either pressure balanced or linkage operated.
What is a Fuel Injection Nozzle Cooling Sleeve? 83 Items
AFuel Injection Nozzle Cooling Sleeve(SLEEVE,COOLING,FUEL INJECTION NOZZLE) is an item designed to dissipate heat from a fuel injection nozzle. It may be provided with cooling fins or ribs and may be connected to the cooling system of an internal combustion engine.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
What is a Distributor Contact Set? 277 Items
ADistributor Contact Set(CONTACT SET,DISTRIBUTOR) is a grouping of two or more separate distributor or magneto contacts.
What is an Ignition Magneto? 339 Items
AnIgnition Magneto(MAGNETO,IGNITION) is an electric generator whose field poles are permanent magnets and which is used to generate electrical energy for the purpose of igniting the combustible mixture in internal combustion engine cylinders. Spark distribution may be accomplished by a distributor portion of the magneto or by a separate item.
What is an Ignition Distributor Rotor? 312 Items
AnIgnition Distributor Rotor(ROTOR,IGNITION DISTRIBUTOR) is the rotating part of an ignition distributor which transfers electrical energy to stationary electrodes. Does not include shaft.
What is a Spark Plug? 1473 Items
ASpark Plugis an item containing two or more electrodes across which an electric spark is discharged to ignite a fuel and air mixture, primarily in internal combustion engines. Excludes GLOW PLUG; and ELECTRODE.
What is an Ignition System Distributor? 533 Items
AnIgnition System Distributor(DISTRIBUTOR,IGNITION SYSTEM) is a mechanism used to regulate the time and transmission of electrical energy in an ignition system for the purpose of igniting the combustible mixture in an internal combustion engine.
What is an Ignition Coil? 718 Items
AnIgnition Coil(COIL,IGNITION) is an item specifically designed to produce the high voltage necessary to provide a spark for igniting combustible mixtures, primarily in internal combustion engines.
What is an Ignition Lock Switch? 806 Items
AnIgnition Lock Switch(SWITCH,LOCK,IGNITION) is a switch which is externally actuated by a device such as a key/cylinder lock to actuate a remote lever or rod rack to activate a remote switch. The actuation device may or may not be an integal part of the switch. The primary purpose of the switch is to open and close the ignition circuit of an internal combustion engine and actuate various accessories. Excludes SWITCH, ENGINE STARTER, ELECTRICAL and SWITCH, LOCK.
What is a Generator Armature? 238 Items
AGenerator Armature(ARMATURE,GENERATOR) is an armature which is a part of a generator. See also ROTOR, GENERATOR.
What is a Motor Armature? 573 Items
AMotor Armature(ARMATURE,MOTOR) is an armature which is a part of a motor. See also ROTOR, MOTOR.
What is a Starter-Generator Armature? 146 Items
AStarter-Generator Armature(ARMATURE,STARTER-GENERATOR) is an armature which is a part of an electrical rotating machine that combines both starter and generator action.
What is a Generator Armature-Rotor? 39 Items
AGenerator Armature-Rotor(ARMATURE-ROTOR,GENERATOR) is the rotating member of an electrical generator which consists of an armature and a rotor on a common shaft. See also basic concept for Armature (1), and basic concept for Rotor (1).
What is a Generator Rotor? 449 Items
AGenerator Rotor(ROTOR,GENERATOR) is a rotor which is a part of an alternating current generator. See also ARMATURE, GENERATOR.
What is a Coil Form? 12 Items
ACoil Form(FORM,COIL) is an item specifically designed to form the foundation on which a coil is wound.
COVER,COIL 45 Items
What is a Magneto Contact Set Cover? 20 Items
AMagneto Contact Set Cover(COVER,CONTACT SET,MAGNETO) is a metallic item specifically designed to cover a magneto contact set. It may be fitted with one or more ventilation devices. See also CAP, (1), IGNITION DISTRIBUTION.
COVER,ELECTRIC MOTOR 150 Items
What is an Electrical Generator Cover? 194 Items
AnElectrical Generator Cover(COVER,ELECTRICAL GENERATOR) is excludes COVER, ACCESS; COVER, GENERATOR SET; and COVER, MOTOR-GENERATOR.
What is a Magneto Coil Cover? 27 Items
AMagneto Coil Cover(COVER,MAGNETO COIL) is a cover specifically designed for mounting on a magneto housing. It may include one or more fittings to facilitate the connection of ventilating and/or electrical devices.
What is an Ignition System Distributor Shield? 38 Items
AnIgnition System Distributor Shield(SHIELD,IGNITION SYSTEM DISTRIBUTOR) is an item specifically designed to be placed around an ignition distributor for the purpose of shielding against electrical interference and having provisions for passage of the ignition cable. May also provide mechanical protection.
What is a Spark Plug Shield? 70 Items
ASpark Plug Shield(SHIELD,SPARK PLUG) is an item specifically designed to be placed around a spark plug for the purpose of shielding against electrical interference and having provisions for passage of the ignition cable. May also provide mechanical protection.
BASE,MOTOR 46 Items
What is an Electrical Engine Starter? 3194 Items
AnElectrical Engine Starter(STARTER,ENGINE,ELECTRICAL) is an item consisting of an electric, direct current, motor and integral and associated components, primarily designed to crank an internal combustion engine, or a gas turbine engine until it starts operating under its own power. May include facilities for manual or mechanical actuation. Excludes MOTOR, ENGINE STARTER, ELECTRICAL; STARTER, MOTOR; STARTER, ENGINE (as modified); and SWITCH, ENGINE STARTER, ELECTRICAL.
What is a Metal Grille? 27 Items
AMetal Grille(GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is an Electrical Rotating Equipment End Bell? 704 Items
AnElectrical Rotating Equipment End Bell(END BELL,ELECTRICAL ROTATING EQUIPMENT) is an item designed to support and position an armature or rotor when installed in a motor, generator or similar electrical rotating equipment. It may include items such as bearings, brushes, brush holders, oilers.
What is an Ignition Distribution Cap? 449 Items
AnIgnition Distribution Cap(CAP,IGNITION DISTRIBUTION) is a cap, generally of phenolic composition, designed to facilitate the connection of the high tension coil and spark plug leads to the distributor or magneto of an internal combustion engine.
What is a Generator Field Winding? 205 Items
AGenerator Field Winding(WINDING,GENERATOR FIELD) is a winding which is a maintenance part for an electric generator.
What is a Motor Field Winding? 380 Items
AMotor Field Winding(WINDING,MOTOR FIELD) is a winding which is a maintenance part for an electric motor.
What is a Starter-Generator Field Winding? 64 Items
AStarter-Generator Field Winding(WINDING,STARTER-GENERATOR FIELD) is a winding which is a maintenance item specifically designed for a starter-generator.
PARTS KIT,TERMINAL,ENGINE IGNITION 47 Items
What is an Electrical Engine Starter Motor? 364 Items
AnElectrical Engine Starter Motor(MOTOR,ENGINE STARTER,ELECTRICAL) is the component part of a STARTER, ENGINE, ELECTRICAL which transforms electrical energy into mechanical energy. It is specifically designed to energize an internal combustion engine starter.
What is an Electrical Engine Starter Relay-Solenoid? 603 Items
AnElectrical Engine Starter Relay-Solenoid(RELAY-SOLENOID,ENGINE STARTER,ELECTRICAL) is an item having a moving plunger type core which travels parallel to the longitudinal axis of the coil(s), and which is primarily designed to perform the dual function of closing the circuit of a STARTER, ENGINE, ELECTRICAL and actuating the starter engaging mechanism. It must have provisions for attaching the mechanical linkage for actuating the engaging mechanism if the linkage is not included. May have provisions for manual actuation. Without contacts this item is known as a SOLENOID, ELECTRICAL. Without provisions for attaching mechanical linkage this item is known as a RELAY, ELECTROMAGNETIC. See also SWITCH, ENGINE STARTER, ELECTRICAL.
What is an Engine Generator Regulator? 1262 Items
AnEngine Generator Regulator(REGULATOR,ENGINE GENERATOR) is a regulator designed to automatically maintain the current and/or voltage output of an engine generator within specified limits, regardless of variation of load or input voltages. May include cutout relay. Does not include items in which regulation is accomplished by transformer action. See also REGULATOR, CURRENT and REGULATOR, VOLTAGE.
What is an Ignition Interference Suppressor? 221 Items
AnIgnition Interference Suppressor(SUPPRESSOR,IGNITION INTERFERENCE) is an insulated cylindrical body, either straight or angular, containing a fixed resistance element, and usually with quick-disconnect type terminals, specifically constructed so that when connected in a high tension electrical ignition system it will reduce interference resulting from arcing of spark plugs, and similar devices. Excludes RESISTOR (as modified) and SUPPRESSOR, PARASITIC. See also FILTER, RADIO FREQUENCY INTERFERENCE.
What is an Engine Generator Cutout Relay? 103 Items
AnEngine Generator Cutout Relay(CUTOUT RELAY,ENGINE GENERATOR) is a device for automatically opening the circuit between an engine generator and the battery of the engine electrical system to prevent the flow of reverse current to the generator and automatically closing the circuit when the voltage of the generator reaches normal range. Excludes REGULATOR, CURRENT and RELAY (as modified).
ADAPTER,SPARK PLUG 43 Items
What is an Engine Accessory Generator? 3134 Items
AnEngine Accessory Generator(GENERATOR,ENGINE ACCESSORY) is a generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
What is an Electrical Engine Starter Switch? 393 Items
AnElectrical Engine Starter Switch(SWITCH,ENGINE STARTER,ELECTRICAL) is a manually operated item specifically designed to close the circuit of a STARTER, ENGINE, ELECTRICAL or the control circuit of its attendant solenoid. It must include a vacuum lock-out mechanism or utilize a switch contact independently mounted on the starter. For switches with integral contacts and no vacuum lock-out, see SWITCH (as modified). See also RELAY-SOLENOID, ENGINE STARTER, ELECTRICAL and STARTER, MOTOR.
What is a Magneto Coil? 187 Items
AMagneto Coil(COIL,MAGNETO) is an item consisting of two individual windings, one upon the other, inductively coupled, having a common iron core, specifically designed to convert the induced primary voltage to high secondary voltage required to ignite combustible mixtures, primarily in internal combustion engines; is a maintenance item for a magneto.
STATOR,ENGINE STARTER 116 Items
ROTOR,MAGNETO 102 Items
What is a Gas Turbine Engine Spark Igniter? 302 Items
AGas Turbine Engine Spark Igniter(IGNITER,SPARK,GAS TURBINE ENGINE) is an item having one or more electrodes arranged to form an air gap across which an electric spark is introduced and discharged to ignite fuel and air mixture in an internal combustion engine for the purpose of initial starting only. In engines designed for the single electrode type, two plugs are required within the combustion chamber in proper placement to effect the air gap. An igniter plug differs from a spark plug by always having cooling facilities in the form of holes or slots in the plug casing to allow entry of air currents around the electrode(s). Excludes SPARK PLUG; GLOW PLUG and ELECTRODE.
What is an Ignition Terminal Sleeve? 44 Items
AnIgnition Terminal Sleeve(SLEEVE,IGNITION TERMINAL) is an item consisting of an electrically insulated body, tubular in shape with provisions for insertion of wire. One end contains a spring to facilitate electrical contact and provisions for attaching a conductor. See also SUPPRESSOR, IGNITION INTERFERENCE. Excludes CLIP, ELECTRICAL; TERMINAL, LUG and CABLE NIPPLE, ELECTRICAL.
What is an Engine Generator Stator? 460 Items
AnEngine Generator Stator(STATOR,ENGINE GENERATOR) is a stator which is a maintenance part of a GENERATOR, ENGINE ACCESSORY.
What is an Engine Starter-Generator Stator? 45 Items
AnEngine Starter-Generator Stator(STATOR,STARTER-GENERATOR,ENGINE) is a stator which is a maintenance part of a STARTER-GENERATOR, ENGINE.
What is an Electrical Engine Starter Parts Kit? 472 Items
AnElectrical Engine Starter Parts Kit(PARTS KIT,ELECTRICAL ENGINE STARTER) is a parts kit for a STARTER, ENGINE, ELECTRICAL. Excludes PARTS KIT, ELECTRICAL CONTACT BRUSH HOLDER and BRUSH SET, ELECTRICAL CONTACT.
What is an Engine Generator Parts Kit? 415 Items
AnEngine Generator Parts Kit(PARTS KIT,ENGINE GENERATOR) is excludes PARTS KIT, ELECTRICAL CONTACT BRUSH HOLDER and BRUSH SET, ELECTRICAL CONTACT.
PARTS KIT,ENGINE GENERATOR REGULATOR 40 Items
What is an Ignition Distributor Parts Kit? 134 Items
AnIgnition Distributor Parts Kit(PARTS KIT,IGNITION DISTRIBUTOR) is excludes CONTACT SET, DISTRIBUTOR.
PARTS KIT,IGNITION MAGNETO 82 Items
What is an Ignition Coil Vibrator? 95 Items
AnIgnition Coil Vibrator(VIBRATOR,IGNITION COIL) is an item which rapidly interrupts the current to an ignition coil or magneto. It may include capacitor(s), relay(s), and/or resistor(s). It does not include ignition system distributors or timers. For items which perform similar functions, but are a part of ignition coils, see ARMATURE, INDUCTION COIL.
What is a Starting Coil? 137 Items
AStarting Coil(COIL,STARTING) is an item designed to increase the output of induction coils, ignition coils or magnetos during engine cranking periods by being connected as an auxiliary inductive load in the primary circuit of the induction coil, ignition coil or magneto. The increase is due to an induced current surge when the current is interrupted by another item such as timer, distributor or vibrator. It does not include a vibrator but may include relays, resistors and capacitors. Includes single and multiple units.
What is an Air Turbine Driven Engine Starter-Generator? 21 Items
AnAir Turbine Driven Engine Starter-Generator(STARTER-GENERATOR,ENGINE,AIR TURBINE DRIVEN) is a compact unit consisting primarily of an air turbine driven starter, a planetary gear system, a hollow shaft kilovolt amperes generator, and an integral control system. It may include a power take-off for driving hydraulic pumps, and the like. It is designed to start turbine engines and supply electrical power. For an electrically powered starter and generator, see STARTER-GENERATOR, ENGINE.
PARTS KIT,EXCITER UNIT 11 Items
PARTS KIT,IGNITION COIL 18 Items
PARTS KIT,SOLENOID PLUNGER 21 Items
PARTS KIT,STARTER DRIVE 113 Items
What is an Engine Ignition Lead Set? 214 Items
AnEngine Ignition Lead Set(LEAD SET,IGNITION,ENGINE) is consists of two or more LEAD, IGNITION, ENGINE. Specifically designed to accommodate engine electrical ignition systems. Ends must be processed or terminated, with or without end boots, universal or custom fitted. Excludes LEAD SET, TEST.
What is an Engine Ignition Lead? 916 Items
AnEngine Ignition Lead(LEAD,IGNITION,ENGINE) is a single solid or braided conductive wire designed for engine ignition, with or without noise suppression cores. The conductor is composed of metallic materials or such nonmetallic materials as graphite impregnated fibers and plastics. Both ends must be processed or terminated, with or without boots. The lead may be of any size or shape. Includes items with metal braided outer covers and grounding nuts. Excludes LEAD, ELECTRICAL; LEAD, STORAGE BATTERY; and items having attached switches, lampholders, suppressors, resistors, and the like.
What is an Armature Assembly? 113 Items
AnArmature Assemblyis the rotating part of an electrical rotating machine which consists of the ARMATURE (as modified) and bearings mounted on a common shaft.
What is a Rotor Assembly? 259 Items
ARotor Assemblyis the rotating part of an electrical rotating machine which consists of a ROTOR (as modified) and bearings mounted on a common shaft.
What is an Armature-Rotor Assembly? 29 Items
AnArmature-Rotor Assemblyis the rotating parts of an electrical rotating machine which consists of an ARMATURE (as modified), ROTOR (as mofified) and bearings mounted on a common shaft. See also ARMATURE ASSEMBLY, and ROTOR ASSEMBLY.
What is an Engine Accessories Modification Kit? 666 Items
AnEngine Accessories Modification Kit(MODIFICATION KIT,ENGINE ACCESSORIES) is an item or group of items employed to modify all engine accessories.
What is an Electrical Terminal Block? 634 Items
AnElectrical Terminal Block(TERMINAL BLOCK,ELECTRICAL) is an item consisting of insulating material, which is specifically designed to have fastened terminals such as threaded screws and/or studs. Item may include embedded capacitors, attached ground wire, and mounting facilities. It is a component part of a STARTER-GENERATOR, ENGINE. Excludes TERMINAL BOARD; and TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Ignition Coil Cap? 17 Items
AnIgnition Coil Cap(CAP,COIL,IGNITION) is an item specifically designed to fit into/over an opening(s) on the enclosure of a COIL, IGNITION. It's primary purpose is to provide mechanical protection and/or prevent the entrance of foreign matter during equipment operation. It may or may not include a predrilled access hole to retain or support a power cable.
What is an Electrical Engine Starter Engagement Rod? 13 Items
AnElectrical Engine Starter Engagement Rod(ENGAGEMENT ROD,ELECTRICAL ENGINE STARTER) is a usually slim, metallic item which, driven by the armature of the engaging relay, presses the pinion against the flywheel ring gear via a drive spindle. Its ends may be equipped with additional parts.
What is an Aircraft Engine Starter-Generator? 141 Items
AnAircraft Engine Starter-Generator(STARTER-GENERATOR,ENGINE,AIRCRAFT) is a rotating machine which is an accessory to and directly cranks an aircraft engine and subsequently generates direct current. The generator and starter action is not simultaneous. See also STARTER,ENGINE,ELECTRICAL and GENERATOR,ENGINE ACCESSORY. Excludes STARTER-GENERATOR,ENGINE,AIR TURBINE DRIVEN.
What is an Ignition Distributor Cam? 47 Items
AnIgnition Distributor Cam(CAM,IGNITION DISTRIBUTOR) is an item designed to convert rotary motion into reciprocating motion for the purpose of opening and closing electrical contacts in an ignition distributor.
What is a Magneto Cam? 32 Items
AMagneto Cam(CAM,MAGNETO) is an item designed to convert rotary motion into reciprocating motion for the purpose of opening and closing electrical contacts in a magneto.
What is a Magneto Coupling? 47 Items
AMagneto Coupling(COUPLING,MAGNETO) is an item specifically designed to couple or connect a magneto to a prime mover. Provides spark retardation and increased rotor acceleration during engine cranking period by means of momentary spring initiated impulses. Functions as a drive coupling at engine speed. It may include accessories such as key, setscrew or retainer(s).
What is an Electrical Starter Engine Drive? 715 Items
AnElectrical Starter Engine Drive(DRIVE,ENGINE,ELECTRICAL STARTER) is an item designed to transmit the torque developed by a starting motor to a reciprocating type internal combustion engine for the purpose of starting the engine. Clutching, meshing, and disengaging action may be accomplished either mechanically or by means of inertia.
What is an Engine Accessory Generator Set? 51 Items
AnEngine Accessory Generator Set(GENERATOR SET,ENGINE ACCESSORY) is a set which must consist of a GENERATOR,ENGINE ACCESSORY, and additional components, such as RECTIFIER,METALLIC: REGULATOR,ENGINE GENERATOR, and the like.
What is an Electrical Starter Engine Drive Housing? 268 Items
AnElectrical Starter Engine Drive Housing(HOUSING,ENGINE DRIVE,ELECTRICAL STARTER) is a machined item designed to support and/or protect the drive mechanism of an engine starter. It may include motor drive end bracket, bearing(s) and retainer(s).
What is an Ignition Distributor Housing? 71 Items
AnIgnition Distributor Housing(HOUSING,IGNITION DISTRIBUTOR) is the outer component of an ignition distributor designed to support or partially support the operating mechanism. It may include bearings, oilers, cap fasteners and/or mounting facilities.
What is a Magneto Housing? 42 Items
AMagneto Housing(HOUSING,MAGNETO) is the outer component of a magneto designed to support the operating mechanism. It may include pole-pieces, magnets, bearings, ventilating louvers and/or mounting facilites.
What is an Ignition Distributor Weight? 40 Items
AnIgnition Distributor Weight(WEIGHT,IGNITION DISTRIBUTOR) is a weight, which by centrifugal force, is used to automatically change the position of an electrical contact breaker cam in an ignition distributor.
What is an Ignition Contact Breaker Plate? 154 Items
AnIgnition Contact Breaker Plate(PLATE,IGNITION CONTACT BREAKER) is an item generally circular in shape with basic thickness small in relation to the diameter. Includes holes, staked posts and/or protrusions used to position and support the electrical contacts of an ignition system. May include capacitor(s) and electrical contacts.
What is an Electronic Starter Regulator-Control? 14 Items
AnElectronic Starter Regulator-Control(REGULATOR-CONTROL,STARTER,ELECTRONIC) is an item designed for the electronic regulating and controlling of a STARTER (as modified). It provides a power supply and various electronic signals necessary for the starter. Excludes CONTROL UNIT, SUPERVISORY, ENGINE STARTER.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
What is an Engine Ignition System? 13 Items
AnEngine Ignition System(IGNITION SYSTEM,ENGINE) is a system used to generate and to deliver the distribution of electrical energy to ignite the air/fuel mixture in an internal combustion engine. It may include one or several COIL,IGNITION; LEAD,IGNITION,ENGINE; ELBOW,IGNITION TERMINAL,AIRCRAFT; ELBOW,IGNITION TERMINAL,NONAIRCRAFT, and the like. It may also include a DISTRIBUTOR,IGNITION SYSTEM and an electronic control module.
GOVERNOR,GASOLINE ENGINE 340 Items
What is a Push-Pull Control Assembly? 1553 Items
APush-Pull Control Assembly(CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Dirt And Liquid Deflector? 130 Items
ADirt And Liquid Deflector(DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is an Air Turbine Engine Starter? 179 Items
AnAir Turbine Engine Starter(STARTER,ENGINE,AIR TURBINE) is an item designed to accelerate turbojet and turboprop engines from rest to starter cutoff speed by means of an air driven turbine.
PARTS KIT,GASOLINE ENGINE GOVERNOR 57 Items
What is a Gas Turbine Engine Starter? 133 Items
AGas Turbine Engine Starter(STARTER,ENGINE,GAS TURBINE) is an item designed to accelerate a gas turbine engine from rest to starter cutoff speed by means of a combustion gas driven turbine and reduction gear assembly constructed to be mounted on the engine starter drive. The combustion gas is generated from ignited liquid fuel and air in the combustion chamber or from a solid propellant cartridge attached to the combustion chamber of the starter. May have provision for energizing the turbine by low pressure air from engine bleed or ground equipment air supply.
What is an Aircraft Fluid Manifold? 316 Items
AnAircraft Fluid Manifold(MANIFOLD,FLUID,AIRCRAFT) is an enclosure with three (3) or more openings designed for use in aircraft de-icing, fuel, hydraulic, oil, pneumatic, and vacuum systems to collect and/or distribute fluids. It may contain valves or metering devices and the like. Excludes MANIFOLD, AIRCRAFT INSTRUMENTS.
What is an Engine Starter Unit? 104 Items
AnEngine Starter Unit(STARTER UNIT,ENGINE) is a manually pushed or towed unit designed to provide electric power for starting aircraft or vehicle engines. It is wheel mounted and may have handles for portability. It has one or more batteries and may or may not include a battery charger. If the battery charger is included, it may be used either to charge the batteries in the unit or in the aircraft/vehicle. Excludes STARTER,ENGINE,ELECTRICAL; and STARTER,ENGINE,GASOLINE.
What is a Metallic Particle Detector? 257 Items
AMetallic Particle Detector(DETECTOR,METALLIC PARTICLE) is a sensing device designed to detect the presence of metallic foreign matter in fuel, hydraulic, or lubricating systems. Detection completes an integral electrical circuit that actuates an external signal and/or actuate the engine to stop.
PARTS KIT,AIR MOTOR 10 Items
PARTS KIT,ENGINE OIL PUMP 45 Items
PARTS KIT,POWER TAKE-OFF 16 Items
What is a Valve Cap? 136 Items
AValve Cap(CAP,VALVE) is a cap designed to mate with a fluid valve body. It may have an orifice through which a rod, shaft, stem, or an adjusting screw passes. For ported items, see HEAD, VALVE. Excludes CAP, PNEUMATIC VALVE.
What is a Valve Head? 28 Items
AValve Head(HEAD,VALVE) is an item designed to mate with a hydraulic or pneumatic valve body. It must have inlet and/or outlet port(s). For items without ports see CAP (1), VALVE.
What is a Jet Engine Anti-Icing Valve Assembly? 83 Items
AJet Engine Anti-Icing Valve Assembly(VALVE ASSEMBLY,ANTI-ICING,JET ENGINE) is an assembly of items consisting of a shutoff valve, selector valve, a thermal switch, and the like used on aircraft engines, both military and commercial, which are designed for the injection of anti-icing bleed air into the intake of aircraft engines.
What is an Engine Exhaust System Hanger? 568 Items
AnEngine Exhaust System Hanger(HANGER,ENGINE EXHAUST SYSTEM) is a metal or combination metal and rubber device designed to absorb shock and/or suspend, mufflers, tail pipes and the like. May include items such as u-bolt(s), washers, nuts and the like. Excludes STRAP, RETAINING; and BRACKET (as modified).
What is an Engine Oil Pump Assembly? 436 Items
AnEngine Oil Pump Assembly(OIL PUMP ASSEMBLY,ENGINE) is a device designed to maintain oil pressure within the moving parts of an internal combustion engine. May contain parts such as shaft, gears, pin, bushing, screen, adjusting screw and the like.
What is an Engine Oil Pump Assembly Housing? 157 Items
AnEngine Oil Pump Assembly Housing(HOUSING,OIL PUMP ASSEMBLY,ENGINE) is a housing which supports, aligns, and positions internal parts of a OIL PUMP ASSEMBLY, ENGINE. It creates a boundary for close clearance of gears, vanes, or pistons to produce pressure or flow of fluids confined to the parameters of the housing.
What is an Engine Exhaust System? 529 Items
AnEngine Exhaust System(EXHAUST SYSTEM,ENGINE) is an assembly specifically designed to exhaust and/or to muffle the sound of gases produced by an engine. The item may include mounting hardware and seals.
What is a Push-Pull Control Assembly Parts Kit? 12 Items
APush-Pull Control Assembly Parts Kit(PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
What is an Engine Sound Reduction Case Section? 150 Items
AnEngine Sound Reduction Case Section(CASE SECTION,SOUND REDUCTION,ENGINE) is an item of various shapes or design representing a part of a CASE (3), SOUND REDUCTION, ENGINE. It includes fastening, sealing and locking features.
What is an Engine Sound Reduction Case? 53 Items
AnEngine Sound Reduction Case(CASE,SOUND REDUCTION,ENGINE) is a case enclosing an engine and designed to reduce the sound produced by an engine. The item is provided with corresponding fastening, sealing, and locking features.
What is a Starter Air Distributor? 101 Items
AStarter Air Distributor(AIR DISTRIBUTOR,STARTER) is a cast or pressed item specifically designed to be driven by a shaft and to conduct compressed air for the starting process into the cylinders by means of distribution disk.
COVER,INTAKE MANIFOLD 138 Items
What is an Engine Accessories Modification Kit? 666 Items
AnEngine Accessories Modification Kit(MODIFICATION KIT,ENGINE ACCESSORIES) is an item or group of items employed to modify all engine accessories.
What is a Spark Ignition Engine Starter? 10 Items
ASpark Ignition Engine Starter(STARTER,ENGINE,SPARK IGNITION) is an item consisting of a spark ignited engine and integral and associated components primarily designed to crank an internal combustion engine until it starts operating under its own power. It may include facilities for manual and/or mechanical actuation. See also STARTER, ENGINE, ELECTRICAL.
What is a Control Cable Assembly? 374 Items
AControl Cable Assembly(CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Power Control Quadrant? 39 Items
APower Control Quadrant(QUADRANT,POWER CONTROL) is an item which includes levers, stops, swithches and friction drag for helicopter engine power control.
What is a Heat Suppressor? 20 Items
AHeat Suppressor(SUPPRESSOR,HEAT) is a device that surrounds an engine (as modified) for the purpose of blocking heat waves and protects the engine from being detected by infrared devices.
What is an Engine Starter Cartridge Combustion Chamber? 19 Items
AnEngine Starter Cartridge Combustion Chamber(CHAMBER,COMBUSTION,ENGINE STARTER CARTRIDGE) is an item accommodating a CARTRIDGE, ENGINE STARTER and using the generated combustion gas for the actuation of a STARTER (as modified).
What is an Engine Monitor? 85 Items
AnEngine Monitor(MONITOR,ENGINE) is an item designed to indicate visually or acoustically, the operating status of an internal combustion engine when reaching critical conditions in terms of lubricating oil pressure, oil mist concentration, operating and bearing temperatures and the like. A speed reduction or operation cutoff device may be included. See also MONITOR, COOLING, WATER.
What is an Engine Electronic Regulator-Control? 442 Items
AnEngine Electronic Regulator-Control(REGULATOR-CONTROL,ELECTRONIC,ENGINE) is an item designed for electronically regulating and controlling speed governors and volumetric flow regulators, injection pumps, turbochargers, the switching on and off and other operations as a function of engine speed and volumetric efficiency of the cylinders. Excludes GOVERNOR (1), DIESEL ENGINE and GOVERNOR (1), GASOLINE ENGINE.
What is an Engine Regulator-Control Housing? 104 Items
AnEngine Regulator-Control Housing(HOUSING,REGULATOR-CONTROL,ENGINE) is a housing designed to accommodate and support component parts of a REGULATOR-CONTROL, ELECTRONIC, ENGINE.
What is an Engine Oil Pump Assembly Housing Section? 58 Items
AnEngine Oil Pump Assembly Housing Section(HOUSING SECTION,OIL PUMP ASSEMBLY,ENGINE) is a rigid item of different forms, which together with at least one further housing section forms a HOUSING (2), OIL PUMP ASSEMBLY, ENGINE.
What is an Engine Top Dead Center Pointer? 24 Items
AnEngine Top Dead Center Pointer(POINTER,TOP DEAD CENTER,ENGINE) is an item which is mounted on a crankcase as a substitute for a stamped marking. In connection with markings on rotating parts it is designed for visual control of the crankshaft angle in relation to the top dead center of the piston in the first cylinder of a combustion engine. Excludes INDICATOR PISTION POSITION, IGNITION TIMING.
What is a Turbine Engine Supervisory Control Unit? 325 Items
ATurbine Engine Supervisory Control Unit(CONTROL UNIT,SUPERVISORY,TURBINE ENGINE) is an electronic unit that continously monitors engine speed, temperature, and air flow and adjusts the FUEL CONTROL, MAIN, TURBINE ENGINE to compensate for changes. Features may include load sharing capabilities, rotor speed governing, loss-of-load protection and analog or manual backup modes. It may contain automatic start capability or self-diagnostic circuitry.
What is an Air Engine Starter Rotor? 51 Items
AnAir Engine Starter Rotor(ROTOR,STARTER,ENGINE,AIR) is a rotor which is incorporated into a STARTER, ENGINE, AIR.
What is a Gas Turbine Engine History Recorder? 15 Items
AGas Turbine Engine History Recorder(RECORDER,HISTORY,GAS TURBINE ENGINE) is an instrument with multiple readouts designed to count and display the actual number of times engine parts experience mechanical and high thermal stress, engine interturbine gas temperatures in relation to time elapsed and actual engine operating hours. Counts are accumulated at various percentages of operating power. These readouts cannot be reset to zero.
What is a Thermocouple Harness Assembly? 32 Items
AThermocouple Harness Assemblyis a device designed to accommodate the attachment of two or more sensors mounted around the circumference of the turbine engine exhaust, which measures the turbine outlet temperature.
What is an Aircraft Engine Governor Diaphragm? 44 Items
AnAircraft Engine Governor Diaphragm(DIAPHRAGM,GOVERNOR,ENGINE,AIRCRAFT) is an item in the form of a thin sheet, film or membrane, made of metallic or non metallic material, which is mounted on an aircraft between the two halves of a housing. It is fixed at the edge to form an airtight seal.
What is an Aircraft Engine Tube Assembly? 878 Items
AnAircraft Engine Tube Assembly(TUBE ASSEMBLY,AIRCRAFT ENGINE) is an aircraft engine component designed to convey fluid. It may be bent or straight, flexible or rigid. It may include fittings to join one or more tubes together. For tube assembly designed to convey fuel from the cell or tank to the engine, see: FUEL LINE,AIRCRAFT.
What is an Engine Starter Supervisory Control Unit? 32 Items
AnEngine Starter Supervisory Control Unit(CONTROL UNIT,SUPERVISORY,ENGINE STARTER) is an item used to start and stop all engines individually or simultaneously either by manual or automatic mode utilizing the CONTROL UNIT, SUPERVISORY, TURBINE ENGINE of all engines. Also regulates the aircraft mounted accessory drive and air turbine starter during engine starts.
What is an Engine Power Takeoff? 90 Items
AnEngine Power Takeoff(POWER TAKEOFF,ENGINE) is a mechanical device designed to be secured to an internal combustion engine and used to transmit the rotary motion of the crankshaft to auxiliary equipment, such as generators, cranes, pumps, compressors, mixers, and the like. Includes a power output shaft and a clutch which may be controlled by a hand lever or a hydraulic or air cylinder. May include pulley(s), flange, yoke or reduction gear unit. Excludes vehicular clutches and POWER TAKEOFF, TRANSMISSION.
What is an Air Engine Starter? 278 Items
AnAir Engine Starter(STARTER,ENGINE,AIR) is an item consisting of an air motor and integral and associated components primarily designed to crank an internal combustion engine until it starts operating under its own power. It may include facilities for manual or mechanical activation.
What is a Direct Combustion Engine Starter? 14 Items
ADirect Combustion Engine Starter(STARTER,ENGINE,DIRECT COMBUSTION) is an item designed to accelerate a gas turbine engine from rest to starting speed by means of gas generated by combustion of fuel and air in a combustion chamber, and thrust directly on the engine turbine through an impingement nozzle mounted in the turbine section. Consists of a combustion chamber, air and fuel system components and igniter. May include the starter tube and/or impingement nozzle.
What is a Gasoline Engine Starter? 82 Items
AGasoline Engine Starter(STARTER,ENGINE,GASOLINE) is an item consisting of a gasoline engine and integral and associated components primarily designed to crank an internal combustion engine until it starts operating under its own power. It may include facilities for manual and/or mechanical actuation. See also STARTER, ENGINE, ELECTRICAL.
What is an Engine Accessories Installation Kit? 46 Items
AnEngine Accessories Installation Kit(INSTALLATION KIT,ENGINE ACCESSORIES) is a collection of small parts necessary for the installation of engine accessories. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
Stock Items with Pictures
Stock Items for FSG 29
NSNName
2940-15-205-0659    OLIO IMPIANTI A/C
2995-01-617-1652    KIT,REPAIR,PMI PHASE B/D
2920-01-495-2191    DISTRIBUTOR SDM 140/4
2920-01-562-8586    CYLINDER,ACTUATOR F/BLOW-IN DOOR ASSY
2910-14-469-8518    CORPS DE ROBINET/VA
2910-14-417-9809    GICLEUR/BUSE, CARBU
2995-01-313-0158    HEAT EXCHANGER,FUEL/OIL
2915-14-423-7432    GICLEUR/BUSE, CARBU
2910-14-388-4086    GICLEUR/BUSE, CARBU
2910-22-269-2632    PLUNGER/BARREL
2910-14-503-0335    GICLEUR/BUSE, CARBU
2920-14-520-6687    CONJONCTEUR/DISJONC
2940-15-217-9269    FILTRO ARIA F/AGRI
2910-14-514-1659    GICLEUR/BUSE, CARBU
2910-14-414-1064    GICLEUR/BUSE, CARBU
2910-14-543-4618    GICLEUR/BUSE, CARBU
2910-14-514-2982    GICLEUR/BUSE, CARBU
2920-27-047-3277    ROTOR, JENERATOR/DI
2915-00-486-3761    CAP-MOT/ LEADS FUEL
2915-14-348-8757    PISTON, VANNE/ROBIN
2915-14-321-6477    GICLEUR/BUSE, CARBU
2915-14-361-4926    GICLEUR/BUSE, CARBU
2915-14-438-3541    GICLEUR/BUSE, CARBU
2915-14-472-3039    GICLEUR/BUSE, CARBU
2910-25-134-3275    FJAER,KULE/DYSE
2930-15-115-5822    COLLETTORE ACQUA D/
2910-14-519-5633    GICLEUR/BUSE, CARBU
2920-27-024-5089    ROTOR, JENERATOR/DI
2915-14-367-0652    GICLEUR/BUSE, CARBU
2910-14-276-6734    GICLEUR/BUSE, CARBU
2915-14-228-0124    GICLEUR/BUSE, CARBU
2910-14-375-9605    GICLEUR/BUSE, CARBU
2915-14-369-2359    GICLEUR/BUSE, CARBU
2910-14-415-5291    GICLEUR/BUSE, CARBU
2915-14-377-6494    GICLEUR/BUSE, CARBU
2915-14-341-5409    GICLEUR/BUSE, CARBU
2915-14-435-8251    GICLEUR/BUSE, CARBU
2915-14-311-8897    GICLEUR/BUSE, CARBU
2915-14-367-7706    GICLEUR/BUSE, CARBU
2915-14-352-0077    GICLEUR/BUSE, CARBU
2915-14-399-3294    GICLEUR/BUSE, CARBU
2915-14-331-7614    GICLEUR/BUSE, CARBU
2910-14-478-8656    GICLEUR/BUSE, CARBU
2915-14-555-8720    PISTON, VANNE/ROBIN
2910-14-372-5684    GICLEUR/BUSE, CARBU
2915-14-373-7326    GICLEUR/BUSE, CARBU
2920-37-400-0629    COMBERVASION S/W
2910-14-470-3490    GICLEUR/BUSE, CARBU
2910-14-413-4351    GICLEUR/BUSE, CARBU
2915-14-396-6052    GICLEUR/BUSE, CARBU
2915-14-346-2730    PISTON, VANNE/ROBIN
2910-14-438-0950    GICLEUR/BUSE, CARBU
2915-14-555-8476    GICLEUR/BUSE, CARBU
2915-14-329-6867    GICLEUR/BUSE, CARBU
2930-15-221-0341    OIL COOLER (P/R MOT
2910-99-777-8207    PIPE F/E COVER TO F
2910-15-129-5038    GUAINA FIAT 600/T T
2910-14-217-6225    GICLEUR/BUSE, CARBU
2915-14-314-6441    GICLEUR/BUSE, CARBU
2910-14-379-7775    GICLEUR/BUSE, CARBU
2915-14-395-8471    GICLEUR/BUSE, CARBU
2910-15-116-1384    CORPO FILTRO OLIO/C
2990-15-188-0681    MANICOTTO TURBO/COL
2990-99-788-9875    COWLING,AIR INLET/O
2990-14-509-9824    REGULATEUR/CONTROLE
2910-14-354-2684    GICLEUR/BUSE, CARBU
2990-99-810-4897    NIPPLE C/W NUT
2915-14-467-9499    GICLEUR/BUSE, CARBU
2910-14-444-7344    GICLEUR/BUSE, CARBU
2915-14-230-5237    GICLEUR/BUSE, CARBU
2910-99-781-6091    PARTS KIT,NEEDLE/SE
2915-14-555-8709    PISTON, VANNE/ROBIN
2910-14-363-8839    GICLEUR/BUSE, CARBU
2920-37-114-4552    ROTOR V/P
2910-14-413-8546    GICLEUR/BUSE, CARBU
2910-14-398-7510    GICLEUR/BUSE, CARBU
2910-14-348-7654    GICLEUR/BUSE, CARBU
2910-14-516-3567    GICLEUR/BUSE, CARBU
2910-14-291-1758    GICLEUR/BUSE, CARBU
2915-14-374-7689    GICLEUR/BUSE, CARBU
2910-14-465-2406    GICLEUR/BUSE, CARBU
2910-14-457-3209    GICLEUR/BUSE, CARBU
2910-99-156-3235    SWITCH/GAUGE
2915-14-372-7514    GICLEUR/BUSE, CARBU
2920-15-173-4095    SENSORE ALFA 75/90
2915-14-331-4683    GICLEUR/BUSE, CARBU
2915-14-345-5392    GICLEUR/BUSE, CARBU
2915-14-356-9706    GICLEUR/BUSE, CARBU
2915-14-467-9523    GICLEUR/BUSE, CARBU
2915-14-367-7684    GICLEUR/BUSE, CARBU
2915-14-413-5318    GICLEUR/BUSE, CARBU
2915-14-419-2247    GICLEUR/BUSE, CARBU
2915-14-425-6868    GICLEUR/BUSE, CARBU
2915-14-339-6128    GICLEUR/BUSE, CARBU
2990-14-459-3212    S/E RENIFLARD
2925-14-466-0111    BOITIER PSU/POTENTI
2920-15-173-4162    SENSORE ALFA 75/90
2915-14-365-5748    GICLEUR/BUSE, CARBU
2915-14-316-2610    GICLEUR/BUSE, CARBU
2920-14-463-5300    CONJONCTEUR SS/ASS
2910-25-134-3280    CHOKEAKSEL M/HEVARM
2920-27-039-0898    ROTOR, JENERATOR/DI
2910-14-439-4665    GICLEUR/BUSE, CARBU
2930-15-164-6482    POMPA ACQUA PER F/D
2920-27-052-1323    ROTOR, JENERATOR/DI
2910-14-394-0156    GICLEUR/BUSE, CARBU
2910-99-554-6097    DECK/BULKHEAD FITTI
2910-14-379-3445    GICLEUR/BUSE, CARBU
2915-14-511-2195    GICLEUR/BUSE, CARBU
2995-99-605-7563    THROTTLE/NOZZLE CON
2910-14-374-0089    GICLEUR/BUSE, CARBU
2915-14-471-6860    GICLEUR/BUSE, CARBU
2910-14-408-4775    GICLEUR/BUSE, CARBU
2915-14-326-2299    GICLEUR/BUSE, CARBU
2910-14-510-7394    GICLEUR/BUSE,CARBUR
2915-14-475-0525    GICLEUR/BUSE,CARBUR
2910-15-164-4232    ALBERINO ACC.A/BUS
2915-14-295-1535    GICLEUR/BUSE, CARBU
2910-14-208-2587    GICLEUR/BUSE, CARBU
2910-14-042-5839    GICLEUR/BUSE, CARBU
2910-14-374-5828    GICLEUR/BUSE, CARBU
2910-14-396-9487    GICLEUR/BUSE, CARBU
2915-14-231-1258    PISTON, VANNE/ROBIN
2910-14-417-9767    GICLEUR/BUSE, CARBU
2910-14-432-5086    GICLEUR/BUSE, CARBU
2910-14-432-5087    GICLEUR/BUSE, CARBU
2910-14-437-0380    GICLEUR/BUSE, CARBU
2915-14-511-2196    GICLEUR/BUSE, CARBU
2915-14-346-2712    CHAPEAU,VANNE/SOUPA
2915-14-303-4765    GICLEUR/BUSE, CARBU
2910-14-493-2052    GICLEUR/BUSE, CARBU
2915-14-419-3030    GICLEUR/BUSE, CARBU
2910-15-129-5027    TUBO FIAT 600/T ALI
2915-14-543-1497    GICLEUR/BUSE, CARBU
2910-14-292-1443    GICLEUR/BUSE, CARBU
2910-14-441-6749    GICLEUR/BUSE, CARBU
2915-14-308-0815    GICLEUR/BUSE, CARBU
2915-14-329-6516    GICLEUR/BUSE, CARBU
2915-14-376-0432    GICLEUR/BUSE, CARBU
2910-14-295-2569    GICLEUR/BUSE, CARBU
2915-14-471-0434    GICLEUR/BUSE, CARBU
2910-14-403-2034    GICLEUR/BUSE, CARBU
2910-14-419-3790    GICLEUR/BUSE, CARBU
2910-14-414-1621    GICLEUR/BUSE, CARBU
2910-14-399-1813    GICLEUR/BUSE, CARBU
2910-14-417-9828    GICLEUR/BUSE, CARBU
2910-14-421-2802    GICLEUR/BUSE, CARBU
2995-14-514-1372    CHAPEAU,VANNE/SOUPA
2910-14-394-0157    GICLEUR/BUSE, CARBU
2910-15-164-4581    TAPPO 1/2 OTTONE G
2930-15-164-6419    RACCORDO 1/2 GAS DI
2910-14-382-9079    GICLEUR/BUSE, CARBU
2910-14-454-3228    GICLEUR/BUSE, CARBU
2915-14-423-7418    CHAPEAU,VANNE/SOUPA
2915-14-290-2627    GICLEUR/BUSE, CARBU
2915-14-367-7709    GICLEUR/BUSE, CARBU
2915-14-303-4750    GICLEUR/BUSE, CARBU
2910-14-432-2457    GICLEUR/BUSE, CARBU
2920-15-164-5783    INDOTTO X F/FIORINO
2915-14-352-5939    GICLEUR/BUSE, CARBU
2915-14-395-0350    GICLEUR/BUSE, CARBU
2990-15-173-4107    SUPPORTO ALFA 75/90
2910-14-435-3170    GICLEUR/BUSE, CARBU
2915-14-447-7980    GICLEUR/BUSE, CARBU
2915-14-411-1674    GICLEUR/BUSE, CARBU
2920-15-164-5268    DEVIOGUIDA F/DUCATO
2915-14-332-3794    PISTON, VANNE/ROBIN
2915-14-467-9460    GICLEUR/BUSE, CARBU
2915-14-383-1681    GICLEUR/BUSE, CARBU
2915-14-415-5914    GICLEUR/BUSE, CARBU
2910-17-116-0134    LVDT.(SPEED/OUTPUT)
2915-14-308-6483    GICLEUR/BUSE, CARBU
2915-14-424-2932    GICLEUR/BUSE, CARBU
2930-15-213-1075    TUBO R9R DIAM.3/4 R
2915-14-284-5571    GICLEUR/BUSE, CARBU
2915-14-467-9524    GICLEUR/BUSE, CARBU
2915-14-353-3348    PORTE DE VISITE/ACC
2915-14-267-3175    GICLEUR/BUSE, CARBU
2940-15-221-5756    FILTRO(F/190)
2990-15-217-9420    CILINDRETTI F/DUCAT
2910-14-552-9224    GICLEUR/BUSE, CARBU
2920-14-418-9484    RELAIS/SOLENOIDE,DE
2915-14-397-2058    GICLEUR/BUSE, CARBU
2910-14-442-5766    GICLEUR/BUSE, CARBU
2940-15-220-2487    FILTRO ARIA F/AUTOB
2910-14-372-5685    GICLEUR/BUSE,CARBUR
2915-14-400-8187    GICLEUR/BUSE, CARBU
2915-14-311-8689    GICLEUR/BUSE, CARBU
2995-14-348-3488    COMMANDE POUSSER/TI
2915-14-267-3173    GICLEUR/BUSE, CARBU
2915-14-293-3926    GICLEUR/BUSE, CARBU
2910-14-425-8845    GICLEUR/BUSE, CARBU
2910-14-504-9426    GICLEUR/BUSE, CARBU
2915-14-346-2181    GICLEUR/BUSE, CARBU
2910-14-499-0993    GICLEUR/BUSE, CARBU
2910-14-394-0155    GICLEUR/BUSE, CARBU
2915-14-267-3174    GICLEUR/BUSE, CARBU
2910-14-481-9594    GICLEUR/BUSE, CARBU
2915-14-467-6093    GICLEUR/BUSE, CARBU
2915-14-425-6884    GICLEUR/BUSE, CARBU
2910-14-351-5708    GICLEUR/BUSE, CARBU
2910-14-482-2761    GICLEUR/BUSE, CARBU
2910-14-362-2676    GICLEUR/BUSE, CARBU
2910-14-426-3448    GICLEUR/BUSE, CARBU
2910-14-423-9742    GICLEUR/BUSE, CARBU
2910-14-241-2031    GICLEUR/BUSE, CARBU
2915-14-362-4247    GICLEUR/BUSE, CARBU
2915-14-348-8735    PISTON, VANNE/ROBIN
2915-14-339-1759    PISTON, VANNE/ROBIN
2915-15-199-8543    SPRAYBAR A/O, CORE
2915-14-534-3739    PISTON, VANNE/ROBIN
2915-14-284-5600    GICLEUR/BUSE, CARBU
2915-14-200-1284    GICLEUR/BUSE, CARBU
2910-14-543-4625    GICLEUR/BUSE, CARBU
2910-14-503-0318    GICLEUR/BUSE, CARBU
2915-14-311-8745    GICLEUR/BUSE, CARBU
2915-14-439-0982    GICLEUR/BUSE, CARBU
2910-14-338-5998    GICLEUR/BUSE, CARBU
2990-15-173-6201    TENDICINGHIA ZETA/U
2910-14-518-9395    GICLEUR/BUSE, CARBU
2910-14-460-6700    GICLEUR/BUSE, CARBU
2910-14-349-6049    GICLEUR/BUSE, CARBU
2910-14-417-9987    GICLEUR/BUSE, CARBU
2910-14-435-7343    GICLEUR/BUSE, CARBU
2910-14-394-9985    GICLEUR/BUSE, CARBU
2915-14-317-2778    GICLEUR/BUSE, CARBU
2910-14-402-1327    GICLEUR/BUSE, CARBU
2910-14-361-8023    GICLEUR/BUSE, CARBU
2910-14-385-3778    GICLEUR/BUSE, CARBU
2915-14-353-3347    PORTE DE VISITE/ACC
2910-14-469-3154    GICLEUR/BUSE, CARBU
2930-15-176-3217    RADIATORE ACQUA F/P
2910-14-351-5624    GICLEUR/BUSE, CARBU
2910-14-497-7870    GICLEUR/BUSE, CARBU
2910-14-407-0546    GICLEUR/BUSE, CARBU
2910-14-481-9285    GICLEUR/BUSE, CARBU
2920-15-139-6128    COPPIA CONTATTI AR/
2915-14-467-9498    GICLEUR/BUSE, CARBU
2910-15-115-2017    FUEL PIPE,H/P
2915-14-290-2695    GICLEUR/BUSE, CARBU
2995-14-435-9773    AMPLIFICATEUR/LIMIT
2910-14-405-2647    GICLEUR/BUSE, CARBU
2910-14-370-7348    GICLEUR/BUSE, CARBU
2915-14-555-8702    PISTON, VANNE/ROBIN
2990-15-173-4083    STAFFA ALFA 90/75
2910-14-329-9529    GICLEUR/BUSE, CARBU
2910-14-444-7047    GICLEUR/BUSE, CARBU
2920-37-114-4589    CLUTCH S/T
2910-14-546-8960    GICLEUR/BUSE, CARBU
2910-14-415-5458    GICLEUR/BUSE, CARBU
NSNName
2915-14-383-9167    GICLEUR/BUSE, CARBU
2910-99-147-9310    FUEL IN/OUT
2910-14-311-7669    GICLEUR/BUSE, CARBU
2920-99-804-0910    GENERATOR/GEARBOX A
2930-15-164-6571    TAPPO X F/PUNTO
2910-14-325-5346    GICLEUR/BUSE, CARBU
2910-14-332-2930    GICLEUR/BUSE, CARBU
2915-14-488-1498    DISQUE,ROBINET/VANN
2910-14-445-7682    GICLEUR/BUSE, CARBU
2915-14-346-2767    GICLEUR/BUSE, CARBU
2910-14-518-1414    GICLEUR/BUSE, CARBU
2940-15-232-0295    FILTRO GASOLIO/OLIO
2915-14-306-4443    GICLEUR/BUSE, CARBU
2915-14-228-0732    GICLEUR/BUSE, CARBU
2915-14-423-8023    GICLEUR/BUSE, CARBU
2910-25-142-2838    PUSTE/PAAFYLLINGS
2910-14-390-4557    GICLEUR/BUSE, CARBU
2915-14-382-3320    GICLEUR/BUSE, CARBU
2990-99-957-9745    FILTER/COALESCER PA
2990-14-323-8202    COMMANDE POUSSER/TI
2915-14-309-7779    GICLEUR/BUSE, CARBU
2940-15-175-6827    FILTRO GASOLIO F/FI
2915-14-360-7018    GICLEUR/BUSE, CARBU
2910-14-406-0918    GICLEUR/BUSE, CARBU
2910-14-370-6879    GICLEUR/BUSE, CARBU
2915-14-336-0523    GICLEUR/BUSE, CARBU
2915-14-392-3087    GICLEUR/BUSE, CARBU
2915-14-311-8744    GICLEUR/BUSE, CARBU
2915-99-615-4645    INDUCER/SCAVENGE IN
2915-14-329-6861    GICLEUR/BUSE, CARBU
2910-14-383-4444    GICLEUR/BUSE, CARBU
2930-15-138-5921    P.C. 486/DX4/100 4M
2915-14-442-1451    SIEGE, ROBINET/VANN
2910-14-504-2644    GICLEUR/BUSE, CARBU
2915-14-448-0137    GICLEUR/BUSE, CARBU
2915-14-392-5840    GICLEUR/BUSE, CARBU
2940-99-477-4477    CAP,FILLER/BREATHER
2915-14-480-5673    GICLEUR/BUSE, CARBU
2910-14-205-8358    GICLEUR/BUSE, CARBU
2915-14-435-8252    GICLEUR/BUSE, CARBU
2940-15-115-2012    BREATHER CAP,A/C,DR
2920-14-370-6586    INTERRUPTEUR/COMMUT
2910-14-385-3791    GICLEUR/BUSE, CARBU
2910-14-379-3447    GICLEUR/BUSE, CARBU
2910-14-378-2531    GICLEUR/BUSE, CARBU
2915-14-369-3558    GICLEUR/BUSE, CARBU
2910-14-363-8849    GICLEUR/BUSE, CARBU
2910-14-397-5530    GICLEUR/BUSE, CARBU
2920-37-114-4584    LEVER S/T
2910-15-164-4662    TUBO NAFTA AL 3/CIL
2915-25-144-1573    FILTERSETT M/PAKNIN
2910-14-467-4248    CORPS DE ROBINET/VA
2910-27-028-7970    KUTUK/KOVAN, YAKIT
2990-99-325-9760    FILTER/COALESCER PA
2930-15-214-0062    TUBO AUTO YORK/03
2915-14-423-7419    DISQUE,ROBINET/VANN
2930-15-181-0321    SCAMBIATORE ACQUA/O
2915-14-419-3037    GICLEUR/BUSE, CARBU
2915-14-463-2313    GICLEUR/BUSE, CARBU
2995-14-339-6294    CHAPEAU,VANNE/SOUPA
2915-14-313-2554    GICLEUR/BUSE, CARBU
2915-15-198-0890    ENG1 F/HANDLE
2915-14-385-3941    GICLEUR/BUSE, CARBU
2910-14-508-1766    GICLEUR/BUSE, CARBU
2915-14-333-1376    GICLEUR/BUSE, CARBU
2915-14-329-6518    GICLEUR/BUSE, CARBU
2910-14-380-1087    GICLEUR/BUSE, CARBU
2915-14-366-4732    GICLEUR/BUSE, CARBU
2910-14-532-4967    GICLEUR/BUSE, CARBU
2915-14-311-8565    PISTON, VANNE/ROBIN
2990-14-418-9468    COMMANDE POUSSER/TI
2910-14-379-1731    GICLEUR/BUSE, CARBU
2910-14-422-3817    GICLEUR/BUSE, CARBU
2910-14-292-1815    GICLEUR/BUSE, CARBU
2920-14-438-0324    INTERRUPTEUR/COMMUT
2910-14-291-3435    GICLEUR/BUSE, CARBU
2915-14-528-7714    GICLEUR/BUSE, CARBU
2910-14-352-7956    GICLEUR/BUSE, CARBU
2910-14-438-4229    GICLEUR/BUSE, CARBU
2915-14-438-3552    GICLEUR/BUSE, CARBU
2915-14-312-8990    GICLEUR/BUSE, CARBU
2910-14-511-2223    GICLEUR/BUSE, CARBU
2940-15-220-8372    FILTRO ARIA F/N. DA
2915-14-376-0574    GICLEUR/BUSE, CARBU
2910-14-422-1898    GICLEUR/BUSE, CARBU
2915-14-395-0353    GICLEUR/BUSE, CARBU
2915-15-164-4905    TAPPO G 1/2
2910-14-385-2116    GICLEUR/BUSE, CARBU
2910-14-394-6006    GICLEUR/BUSE, CARBU
2915-14-555-8710    PISTON, VANNE/ROBIN
2915-14-392-3067    GICLEUR/BUSE, CARBU
2915-14-316-2605    GICLEUR/BUSE, CARBU
2910-14-550-2411    GICLEUR/BUSE, CARBU
2915-14-411-2286    GICLEUR/BUSE, CARBU
2910-14-381-4890    GICLEUR/BUSE, CARBU
2910-14-428-6991    GICLEUR/BUSE, CARBU
2910-14-543-4619    GICLEUR/BUSE, CARBU
2915-14-284-5587    GICLEUR/BUSE, CARBU
2910-14-444-7043    GICLEUR/BUSE, CARBU
2910-14-215-7220    GICLEUR/BUSE, CARBU
2990-15-164-7205    TUBO SCARICO F/DAIL
2915-14-267-3172    GICLEUR/BUSE, CARBU
2910-14-445-7680    GICLEUR/BUSE, CARBU
2915-14-325-1916    GICLEUR/BUSE, CARBU
2910-00-740-2499    VALVE,FLOAT W/SEAT
2915-14-438-3519    GICLEUR/BUSE, CARBU
2915-14-385-3080    GICLEUR/BUSE, CARBU
2915-14-342-5610    GICLEUR/BUSE, CARBU
2910-14-429-5536    GICLEUR/BUSE, CARBU
2915-14-469-0883    GICLEUR/BUSE, CARBU
2910-14-354-1896    GICLEUR/BUSE, CARBU
2910-14-338-7630    GICLEUR/BUSE, CARBU
2910-14-298-2948    GICLEUR/BUSE, CARBU
2915-14-362-6637    GICLEUR/BUSE, CARBU
2920-14-402-6229    INTERRUPTEUR/COMMUT
2910-14-376-5453    GICLEUR/BUSE, CARBU
2910-14-292-1819    GICLEUR/BUSE, CARBU
2915-14-385-3962    GICLEUR/BUSE, CARBU
2915-14-329-6916    GICLEUR/BUSE, CARBU
2915-14-290-2575    GICLEUR/BUSE, CARBU
2910-14-441-0051    GICLEUR/BUSE, CARBU
2915-14-400-4056    DISQUE,ROBINET/VANN
2990-15-212-5441    ROMPIFIAMMA C/MOLLA
2915-14-348-4964    GICLEUR/BUSE, CARBU
2915-14-308-6486    GICLEUR/BUSE, CARBU
2990-15-173-4428    TUBO ALFA 90/75
2920-15-186-5863    ARMATURE/ANCHOR (P/
2990-99-374-7391    FILTER/COALESCER PA
2990-14-258-2664    SIEGE,ROBINET/VANNE
2930-14-412-1862    PORTE DE VISITE/ACC
2915-14-439-1076    GICLEUR/BUSE, CARBU
2915-14-382-6728    GICLEUR/BUSE, CARBU
2910-14-398-8105    GICLEUR/BUSE, CARBU
2990-25-129-3189    FORPUMPE,KOMPL.U/MO
2915-14-312-8991    GICLEUR/BUSE, CARBU
2995-99-605-7564    THROTTLE/NOZZLE CON
2945-33-005-0286    COVER A/O OIL FILTE
2910-15-216-2737    TAPPO FRIZ/F.UNO
2990-99-409-6426    TANK,COOLANT/HYDRAU
2910-14-366-7703    GICLEUR/BUSE, CARBU
2910-14-375-9189    GICLEUR/BUSE, CARBU
2915-14-376-0567    GICLEUR/BUSE, CARBU
2990-15-173-4975    ANELLO/CONO SCARICO
2915-14-433-7913    GICLEUR/BUSE, CARBU
2915-14-367-7682    GICLEUR/BUSE, CARBU
2915-14-387-6672    GICLEUR/BUSE, CARBU
2930-15-173-4108    TERMOSTATO ALFA 75/
2950-14-413-2671    CENTREUR AV/AR
2910-27-055-5045    KUTUK/KOVAN, YAKIT
2920-27-039-0405    ROTOR, JENERATOR/DI
2930-15-125-3878    MANICOTTO AR/76
2910-14-408-0981    GICLEUR/BUSE, CARBU
2910-14-429-6756    GICLEUR/BUSE, CARBU
2910-14-360-3012    GICLEUR/BUSE, CARBU
2910-14-354-7120    GICLEUR/BUSE, CARBU
2910-14-402-0486    GICLEUR/BUSE, CARBU
2910-14-421-2725    GICLEUR/BUSE, CARBU
2910-15-139-5816    POMPA 300/PC
2915-14-041-9146    GICLEUR/BUSE, CARBU
2910-14-382-9207    GICLEUR/BUSE, CARBU
2910-14-543-4622    GICLEUR/BUSE, CARBU
2915-14-501-9413    CHAPEAU,VANNE/SOUPA
2915-14-284-5609    GICLEUR/BUSE, CARBU
2910-14-345-0096    GICLEUR/BUSE, CARBU
2915-14-361-4927    GICLEUR/BUSE, CARBU
2920-27-021-1197    ENDUVI, JENERATOR/A
2910-14-349-8839    GICLEUR/BUSE, CARBU
2910-27-039-6832    KUTUK/KOVAN, YAKIT
2925-00-591-3266    BAND ASSEMBLY,STARTER/G
2910-14-455-7719    GICLEUR/BUSE, CARBU
2915-14-311-8702    GICLEUR/BUSE, CARBU
2920-27-038-3738    ROTOR, JENERATOR/DI
2910-14-362-9695    GICLEUR/BUSE, CARBU
2920-15-139-4543    VALVOLA F/370
2990-15-125-4265    BLOCCHETTO PER AR/7
2910-14-549-1689    GICLEUR/BUSE, CARBU
2915-14-312-8992    GICLEUR/BUSE, CARBU
2915-14-392-5869    PISTON, VANNE/ROBIN
2940-15-117-8348    FILTER ELEMENT,A/C
2910-14-445-7690    GICLEUR/BUSE, CARBU
2940-15-215-2860    FILTRO 102/202 ABEK
2920-27-059-8785    ROTOR, JENERATOR/DI
2910-14-388-6934    GICLEUR/BUSE, CARBU
2910-14-547-6127    GICLEUR/BUSE, CARBU
2910-14-396-0086    GICLEUR/BUSE, CARBU
2910-14-417-6857    GICLEUR/BUSE, CARBU
2920-27-058-3307    ROTOR, JENERATOR/DI
2920-15-164-5267    DEVIOGUIDA F/UNO
2920-14-437-3011    S/ENS PLATEAU DIODE
2920-27-034-4829    ROTOR, JENERATOR/DI
2915-14-393-4354    GICLEUR/BUSE, CARBU
2915-14-042-3324    GICLEUR/BUSE, CARBU
2920-14-413-9524    INTERRUPTEUR/COMMUT
2915-14-343-2406    GICLEUR/BUSE, CARBU
2915-14-379-3196    GICLEUR/BUSE, CARBU
2910-15-115-2016    FUEL PIPE,H/P
2915-14-376-0570    GICLEUR/BUSE, CARBU
2915-14-316-0009    GICLEUR/BUSE, CARBU
2910-14-417-3812    GICLEUR/BUSE, CARBU
2915-14-324-2328    PISTON, VANNE/ROBIN
2915-14-393-8430    GICLEUR/BUSE, CARBU
2910-27-027-7399    KUTUK/KOVAN, YAKIT
2915-14-411-2292    GICLEUR/BUSE, CARBU
2915-14-293-3666    GICLEUR/BUSE, CARBU
2910-14-380-0646    GICLEUR/BUSE, CARBU
2910-14-446-9296    GICLEUR/BUSE, CARBU
2910-14-444-7045    GICLEUR/BUSE, CARBU
2910-14-402-7036    GICLEUR/BUSE, CARBU
2930-15-230-0373    TUBO GOMMA C/AVVOLG
2915-14-349-9623    GICLEUR/BUSE,CARBUR
2915-14-228-0123    GICLEUR/BUSE, CARBU
2915-14-340-9243    GICLEUR/BUSE, CARBU
2910-14-413-7591    GICLEUR/BUSE, CARBU
2915-14-042-1544    GICLEUR/BUSE, CARBU
2915-14-460-6616    PISTON, VANNE/ROBIN
2910-14-359-6471    GICLEUR/BUSE, CARBU
2910-14-529-9966    GICLEUR/BUSE, CARBU
2915-14-348-8782    PISTON, VANNE/ROBIN
2915-14-438-3547    GICLEUR/BUSE, CARBU
2915-14-329-6515    GICLEUR/BUSE, CARBU
2915-14-419-3041    GICLEUR/BUSE, CARBU
2915-14-324-2551    GICLEUR/BUSE, CARBU
2915-14-435-8271    GICLEUR/BUSE, CARBU
2915-14-303-4753    GICLEUR/BUSE, CARBU
2920-27-047-3280    ROTOR, JENERATOR/DI
2915-14-213-7563    GICLEUR/BUSE, CARBU
2920-27-025-7664    ROTOR, JENERATOR/DI
2910-14-424-0693    GICLEUR/BUSE, CARBU
2910-14-421-1949    GICLEUR/BUSE, CARBU
2945-14-333-1257    SIEGE,ROBINET/VANNE
2910-14-292-1817    GICLEUR/BUSE, CARBU
2995-99-748-5314    PIPE/MTG.FACE BLANK
2915-14-371-0151    GICLEUR/BUSE, CARBU
2910-14-402-9183    GICLEUR/BUSE, CARBU
2910-14-354-7171    GICLEUR/BUSE, CARBU
2910-14-349-3515    GICLEUR/BUSE, CARBU
2910-14-402-1328    GICLEUR/BUSE, CARBU
2915-14-459-3102    GICLEUR/BUSE, CARBU
2910-14-385-9513    GICLEUR/BUSE, CARBU
2910-14-394-9972    GICLEUR/BUSE, CARBU
2910-14-459-5159    GICLEUR/BUSE, CARBU
2920-37-132-0416    ALTERNATOR W/O PUL
2910-14-307-0788    GICLEUR/BUSE, CARBU
2940-15-164-6883    FILTRO PER P/N F11-
2910-14-538-4987    GICLEUR/BUSE, CARBU
2910-14-424-9373    GICLEUR/BUSE, CARBU
2915-25-139-2467    DYSE,DRIVST M/HOLDE
2915-14-329-7491    GICLEUR/BUSE, CARBU
2990-01-486-9911    STARTING KIT,COLD WEATHER W/O BATTERIES
2910-15-232-3385    FILTRO GASOLIO 1/4