2840-25-118-2750
Flat Washer
2840251182750 251182750
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2024
1
Marketplace 2840-25-118-2750
Request a Quotation from participating marketplace vendors
Related Documents 2840-25-118-2750 4+ Documents (More...)
Flat Washer 2840251182750 251182750 Jet Engines, Aircraft, Prime Moving; and Components from Norway
Engines, Aircraft, Prime Moving; and Components from Norway (NO) Externally Relieved Body Bolt 2840-25-118-2750