2835-01-120-1727

5310-14-249-7344 5310142497344 142497344 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5950-00-249-7344 5950002497344 002497344 is a transformer which is designed so that part or all of its range of operating frequencies is 20 kilohertz (kilocycles) and below. the maximum value may extend into the radio frequency range. it is generally used in the input, output, amplifier, or oscillator stages of audio and sonar devices.

CAGE 99551 Goodrich Corporation in Rome, NY United States