2815-00-146-7479

4820-99-560-6981 4820995606981 995606981 is a valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. the flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. it may be inline or cartridge (manifold) design. excludes valve (1), y; valve, stop-check; and cock, shutoff, screw stem.

3465-66-050-1611 3465660501611 660501611 is a device having a precision finished base, support post, and arm. it is equipped with a clamping screw and is specifically designed to hold cylindrical, or the like, items perpendicular to the base when taking measurements.

4820-99-424-1100 4820994241100 994241100 is a valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. the flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. it may be inline or cartridge (manifold) design. excludes valve (1), y; valve, stop-check; and cock, shutoff, screw stem.

5962-99-395-9776 5962993959776 993959776 is a microcircuit having the dual functions of a microcircuit (1), digital and a microcircuit (1), linear.

5365-34-038-5860 5365340385860 340385860 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.