2815-15-106-0971

3930-99-465-5845 3930994655845 994655845

6150-01-465-5845 6150014655845 014655845 is a definite continuous length of cable, special purpose, electrical, having one or more ends processed or terminated in fittings which provide for connection to other items. excludes items having branches or forks. excludes lead, test and cable and conduit assembly, electrical.

5310-14-465-5845 5310144655845 144655845 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5330-00-465-5845 5330004655845 004655845 is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.