2815-33-206-8736

5360-12-324-7015 5360123247015 123247015 is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and spring, reinforcing, hose.

5365-12-324-4527 5365123244527 123244527 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

5365-12-324-4525 5365123244525 123244525 is a straight nonfluid fitting with wrenching facilities on one end and external threads, other than pipe or hose series, on the other end. it has an unthreaded through hole in its axis which may be countersunk and/or counterbored on one or both ends. it is designed to accommodate a shaft, or the like, or used to reinforce a hole in a bulkhead, or the like. for similar items specifically designed for use in a stuffing box, see packing nut. for nonfluid items with an internal thread, see insert, screw thread&#59; or adapter bushing. excludes reducer, boss&#59; and items designed to accommodate a tube or tube fitting.

5315-12-324-4755 5315123244755 123244755 is a headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin,straight,threaded.

how to enable JavaScript in your web browser . 1420-99-537-3071Display Unit1420995373071 995373071 906564