2815-12-348-4715

6515-66-134-8536 6515661348536 661348536 DEPRESSOR,TONGUE

5340-14-542-1293 5340145421293 145421293 is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. it may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. it is designed to regulate the distance (take-up) between two points by turning. see also pelican hook and turnbuckle assembly; and tie rod, tensioning, threaded end.

5310-66-152-3214 5310661523214 661523214 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

4820-12-332-5162 4820123325162 123325162 is an item usually metallic, threaded or unthreaded, used for securing to or positioning into a mating part. it is designed to be used in a globe, relief, regulator valve and the like as a means of controlling the flow of liquids or gases in a given system. one end may have an integral disk or be designed to accommodate a metallic or nonmetallic disk. the other end is designed for a handwheel, lever, spring, diaphragm and the like for nonpowered operation or to accommodate a gear, solenoid, air motor and the like for powered operation. the handwheel and/or disk may be furnished with the item. excludes stem, faucet; and stem, needle valve.

2010-12-153-5018 2010121535018 121535018 FLANSCH, GETRIEBE