2815-21-001-1735

5360-00-331-2575 5360003312575 003312575 is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and spring, reinforcing, hose.

5340-01-331-2575 5340013312575 013312575 is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). it is designed to retain and/or position the items close to a structure. it may be fastened to the structure on one end, both ends, or in the center. see also clamp, loop. excludes bracket, pipe; strap, leather and strap, webbing.

3120-12-331-2575 3120123312575 123312575 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.

5935-14-331-2575 5935143312575 143312575 is the main or principal part of a connector, receptacle, electrical which includes insert(s) designed to accommodate but does not include removable contacts. it may have a hood or shell, a jackscrew and jacksocket, or other means for polarizing and aligning. it is designed to be mounted on a bulkhead, chassis, panel, wall, or the like. excludes connector body, modular receptacle, electrical. for items without inserts, see shell, electrical connector.

May 1968 5305-21-615-5228 Socket Head Cap Screw 217941RNCC: 3 | RNVC: 2 | DAC: 4 6 Jun 1968 2815-21-001-1735