2805-00-612-2046

Documents 6640-01-628-5491 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-28/fsc-2805/us 2805-00-612-2046
Piston Ring Set 2805006122046 006122046 RNVC: 2 | DAC: 6 1 Jan 1963 2805-00-612-2046 https//www.nsnlookup.com

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Piston Ring Set (INC 16116) : 6 1 Jan 1963 2805-00-612-2046

5 1 Jan 1963 3010-00-620-5329 Piston Ring Set 100208-3RNCC: 5 | RNVC: 2 | DAC: 6 1 Jan 1963 2805-00-612-2046

1680-12-165-3308 1680121653308 121653308 is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). it is designed to position, align, and/or support an item. it may be reinforced. see also bracket, angle and bracket (1), mounting.

5306-01-165-3308 5306011653308 011653308 is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.