2805-15-105-5540

www.nsnlookup.com /fsg-65/fsc-6550/nl 6550-17-119-0034 https//www.nsnlookup.com /fsg-28/fsc-2805/it 2805-15-105-5540
Se Anelli Stantuffo 2805151055540 151055540 Documents 2805-15-105-5540 5+ Documents ( More... )

1234417986550-12-344-17986550123441798123441798 TEST SLIDE, https//www.nsnlookup.com /fsg-28/fsc-2805/it 2805-15-105-5540
Se Anelli Stantuffo 2805151055540 151055540 119-0034 5905991190034 991190034 RESISTOR,BALLAST https

2530-22-119-0034 2530221190034 221190034 BREMSHEBEL, HAND-

8405-13-119-0034 8405131190034 131190034 is a cap worn by military personnel. it has a round crown which is usually stiffened with a crown support. it usually has a visor.

5310-15-119-0034 5310151190034 151190034 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.