2610-01-656-4528

2014 2610-01-658-7265 Vehicular Pneumatic Tire 5190461RNCC: 3 | RNVC: 2 | DAC: 3 13 Oct 2016 2610-01-656-4528

day Upgrade your Account Upgrade 2610-01-584-0041Vehicular Pneumatic Tire2610015840041 015840041 6H01411

4010-14-519-3311 4010145193311 145193311 is an assembly consisting of wire rope, with terminal attachment(s) and/or end loop(s), in a continuous run from end to end. (if without attachments, one end must terminate in a loop.) it may contain one or more intermediate and/or end attachments such as sliding or fixed ring(s), hook(s), or the like. for items specifically designed for aviation, see wire rope assembly, single leg, aviation. excludes control assembly, push-pull.

5365-37-519-3311 5365375193311 375193311 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5320-01-519-3311 5320015193311 015193311 is a metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.