2590-00-693-4179

(CAGE Code 55176) 5 1 Jan 1963 2590-00-693-4179 Receptacle With Cab 37680RNCC: 5 | RNVC: 2 | DAC: 5 1

5 1 Jan 1963 5325-00-693-1684 H Spur Type Grommet 23182RNCC: 3 | RNVC: 2 | DAC: 5 1 Jan 1963 2590-00-693-4179

4710-00-773-7417 4710007737417 007737417 is a straight, hollow product, welded or seamless, of round, square, or any other cross section and continuous periphery, which does not conform in cross sectional dimensions to recognized pipe standards, or those in tables 1 through 10, appendix c, fiig a004a. it is designed to convey fluids, gasses, and/or semisolids. it may be rolled into coils for ease in handling. for items designed to join a tube or tube fitting to another tube, pipe, or hose or fitting, see adapter (as modified); coupling (as modified); or nipple (as modified). excludes tube, bent (as modified); pipe, metallic; spacer, sleeve; metal bar (hollow); and items with fittings, except end protectors.

5975-14-529-3145 5975145293145 145293145 is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. it may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. it may include a shielding function, integral wiring, and mounting hardware as part of the item. excludes mounting base, electrical equipment.

5365-00-738-7797 5365007387797 007387797 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.