2590-99-836-3379

66802225383312225383316680-22-253-83316680222538331222538331 is a switch https//www.nsnlookup.com /fsg-25/fsc-2590/uk 2590-99-836-3379
Wiring Loom 2590998363379 998363379,380005 Documents 2590-99-836-3379 5+ Documents ( More... )

2530-12-145-5846 2530121455846 121455846 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

Address:1 Rustaveli Avenue Tbilisi 380005 Georgia Points of Contact:Telephone:962793301666 Related Information
known as International Projekts Management Dba Ipm Dba Ipm located at 1 Rustaveli Avenue, Tbilisi, 380005
refers to International Projekts Management Dba Ipm Dba Ipm located at 1 Rustaveli Avenue, Tbilisi, 380005

5310-12-151-4829 5310121514829 121514829 is a washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.

5920-99-639-1938 5920996391938 996391938 is a fuse in which the element is inclosed in a cylindrical body. the element may be renewable. the terminals may be of varying types. it may contain a visual indication that the fusible element is severed, and may also provide an audible alarm through auxiliary circuitry. for noncylindrical items, see fuse, inclosed link.