Miscellaneous Vehicular Components - United Kingdom (UK)
Federal Supply Class (FSC): 2590
NATO Supply Classification Class (NSC): 2590
Federal Supply Group (FSG): 25 Vehicular Equipment Components
NATO Supply Classification Group (NSG): 25 Vehicular Equipment Components
Items Managed by United Kingdom (UK) - NCB is 99
Page 1 of 122
NSN Format for Miscellaneous Vehicular Components
Codified by United Kingdom
| 25 | 90 | 99 | XXX | XXXX | |||
|---|---|---|---|---|---|---|---|
| Group FSG | Class | NCB | Identifier | ||||
| FSC Federal Supply Class | NIIN | ||||||
| NSN | |||||||
NATO Supply Class 2590 is a classification for Miscellaneous Vehicular Components within NATO Supply Group 25, which is dedicated to Vehicular Equipment Components.
This supply class includes a wide range of components that are used in various types of vehicles. These components are essential for the proper functioning and maintenance of vehicles in military operations.
Some examples of the miscellaneous vehicular components included in this supply class are:
1. Brakes: This includes brake pads, brake drums, brake calipers, and other related components that are crucial for the vehicle's braking system.
2. Suspension Systems: This includes shock absorbers, springs, and other components that help in maintaining the stability and smoothness of the vehicle's ride.
3. Fuel Systems: This includes fuel pumps, fuel filters, fuel tanks, and other components that are responsible for the storage and delivery of fuel to the vehicle's engine.
4. Electrical Systems: This includes batteries, alternators, starters, and other electrical components that are necessary for the vehicle's electrical system to function properly.
5. Cooling Systems: This includes radiators, water pumps, and other components that help in regulating the temperature of the vehicle's engine.
6. Exhaust Systems: This includes mufflers, exhaust pipes, and other components that are responsible for the proper discharge of exhaust gases from the vehicle's engine.
7. Steering Systems: This includes steering racks, tie rods, and other components that enable the driver to control the direction of the vehicle.
These are just a few examples of the miscellaneous vehicular components included in NATO Supply Class 2590. The class encompasses a wide range of components that are essential for the operation and maintenance of military vehicles.
Includes Attachments for Tanks, Self-propelled Weapons, and High Speed Tractors; A-frames and Winches specifically designed for truck mounting; Cranes and Crane Booms for Wrecker Trucks.
Note-The term "vehicular" as delimited for group 25, is applicable to those vehicles and tractors included in groups 23 and 24, construction vehicles included in group 38, and warehouse trucks, tractors, and trailers included in group 39. It does not apply to railway vehicles (group 22), aircraft (group 15), or watercraft (group 19). An item of supply which is a "vehicular" component, within the scope delimited above, is classified in this group regardless of whether it has additional applications on vehicles outside the delimitations for this group.
Frequently Asked Questions(FAQ) for Federal Supply Class 2590
- What is Federal Supply Class 2590?
- FSC 2590 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 2590) in the USA for supply items codified in the category of Miscellaneous Vehicular Components.
- What is NATO Supply Classification Class 2590?
- NSC 2590 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 2590 in the USA) for supply items codified in the category of Miscellaneous Vehicular Components.
- Which Federal Supply Group is FSC 2590 in?
- FSC 2590 is in Federal Supply Group (FSG) 25 which contains Vehicular Equipment Components.
- Which NATO Supply Classification Group is NSC 2590 in?
- NSC 2590 is in NATO Supply Classification Group (NSG) 25 which contains Vehicular Equipment Components.
Supply Items Included in Federal Supply Class 2590
- What is a Metal Molding? 53 Items
- A Metal Molding (MOLDING,METAL) is a shaped piece of metal having a plane or curved surface, either sunk or projecting, used for ornamental or other application.
- What is a Push-Pull Control Assembly? 176 Items
- A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
- Blade,Bulldozer,Earth Moving 10 Items
- What is a Cable Reel? 11 Items
- A Cable Reel (REEL,CABLE) is a reel designed to accommodate wire, cord and/or cable. Excludes REEL, SOUND RECORDING WIRE. See also REELING MACHINE, CABLE (as modified).
- What is a Vehicle Mounting Drum Winch? 79 Items
- A Vehicle Mounting Drum Winch (WINCH,DRUM,VEHICLE MOUNTING) is a power operated mechanical device designed to be mounted on a self-propelled vehicle and driven by the vehicle power take-off or an integral power unit. The device has a horizontally mounted revolvable drum(s) on the periphery of which the end of a rope, line, or chain is secured for exerting a raising, lowering, or pulling motion. The device may also contain a revolvable head(s) or spool(s) (gypsy head) around which one or more turns must be taken for exerting pulling power. See also WINCH, GYPSY. Excludes WINCH, DRUM, POWER OPERATED and WINCH, AIRCRAFT MOUNTED.
- What is a Hydraulic System Oil Tank? 130 Items
- A Hydraulic System Oil Tank (TANK,OIL,HYDRAULIC SYSTEM) is a fully inclosed tank used to hold the reserve hydraulic oil in hydraulic systems. It must have an opening for manual filling. Excludes hydraulic cylinders, TANK, PRESSURE and TANK, HYDRAULIC FLUID, AIRCRAFT.
- What is a Hydraulic Accumulator? 53 Items
- A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
- What is a Cushioning Pad? 422 Items
- A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
- What is a Semitrailer Retractable Support Leg? 20 Items
- A Semitrailer Retractable Support Leg (LEG,SEMITRAILER RETRACTABLE SUPPORT) is a rigid metal item of various shapes and cross sections which may be a single member component of a SUPPORT, RETRACTABLE, SEMITRAILER. It may have a shoe, foot, wheel, or the like, attached at one end for a base. It must have facilities for direct or indirect mounting to a semitrailer.
- What is a Linear Actuating Cylinder Assembly Parts Kit? 24 Items
- A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
- What is an Access Cover? 47 Items
- An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
- What is a Filler Opening Cap? 285 Items
- A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
- What is a Trailer Retractable Support? 16 Items
- A Trailer Retractable Support (SUPPORT,RETRACTABLE,TRAILER) is an assembly usually having one or more adjustable legs with wheels or shoes at their ends, designed to support the front of a trailer when disengaged from the towing vehicle. Excludes support and leveling jacks.
- What is an Automotive Multifunction Control? 41 Items
- An Automotive Multifunction Control (CONTROL,MULTIFUNCTION,AUTOMOTIVE) is an item which is normally mounted on the steering column below the steering wheel of a motor vehicle, that performs a variety of functions. The respective actuators are pressed, flipped, pushed, pulled, or rotated to control the operation of the directional signal light, headlamp flasher, high-low beam, wiper, washer, horn, and the like. It may have cable assemblies or single conductor cords that provide correction with the circuitry. Excludes CONTROL, DIRECTIONAL SIGNAL LIGHT, AUTOMOTIVE.
- What is an Ammunition Stowage Rack? 51 Items
- An Ammunition Stowage Rack (RACK,AMMUNITION STOWAGE) is an open frame structure for the stowage of ammunition, which may or may not contain subdivisions.
- What is a Mine Clearing Blade? 45 Items
- A Mine Clearing Blade (BLADE,MINE CLEARING) is consists of two independently, mechanically operated moldboards with scarifier teeth (tines) supported by skid shoes. Each blade is designed to be mounted on the front of a full-tracked, combat tank with the sole purpose of clearing antitank mines from within the track path. The bottom section of each moldboard has scarifier teeth welded permanently in place. The scarifier teeth dig into the ground and act as the cutting edge for the blade. The teeth cast the mines up into the moldboards which in turn throws them aside and away from the tank's track.
- What is a Jack-Support Shoe? 10 Items
- A Jack-Support Shoe (SHOE,JACK-SUPPORT) is an item of various materials and shapes, designed to create, enhance, or secure a supporting surface of a JACK (as modified) or SUPPORT (as modified) and the like. It can be installed temporarily or permanently under the material to bear for some maintenance operations, lifting, handling and the like.
- What is a Hydraulic Manifold Assembly? 18 Items
- A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
- What is a Lift Blade Arm Assembly? 22 Items
- A Lift Blade Arm Assembly (ARM ASSEMBLY,LIFT BLADE) is a metallic item of different design configurations with fastening devices on both ends. One end is mounted on the vehicle. The other end is designed for accomodation of attachments such as a lift blade. Excludes BOOM JIB, CRANE.
- Handrail,Vehicular 54 Items
- What is a Vehicular Equipment Components Modification Kit? 200 Items
- A Vehicular Equipment Components Modification Kit (MODIFICATION KIT,VEHICULAR EQUIPMENT COMPONENTS) is an item or items employed individually or conjunctively to modify vehicular equipment components.
- What is a Vehicular Components Bracket? 4954 Items
- A Vehicular Components Bracket (BRACKET,VEHICULAR COMPONENTS) is a rigid item designed to suspend, support, retain and/or position vehicular component and/or attachment items. Do not use if a more specific item name exists.
- What is a Mounting Plate? 15 Items
- A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
- What is a Control Cable Assembly? 206 Items
- A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
- What is a Mine Clearing Supplementary Equipment? 11 Items
- A Mine Clearing Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,MINE CLEARING) is a collection of items such as mineclearing equipment, armor plates and any other protective devices designed to enhance the operational capabilities of a vehicle.
- What is a Spare Tire Retainer? 76 Items
- A Spare Tire Retainer (RETAINER,SPARE TIRE) is an item/items, which may contain winching capabilities, designed to position and/or restrain movement of a WHEEL, PNEUMATIC TIRE.
- What is a Vehicular Baggage Rack? 124 Items
- A Vehicular Baggage Rack (RACK,BAGGAGE,VEHICULAR) is an open frame structure designed for transporting baggage and other objects. It is primarily mounted on the roof and/or exterior of a vehicle. Mounting hardware, a ladder, a handrail and facilities for securing the cargo during transport may be included.
- What is a Roller Fairlead Roller? 16 Items
- A Roller Fairlead Roller (ROLLER,ROLLER FAIRLEAD) is a cylindrical item with an essentially crowned face used for guiding or changing direction of ropes, cables, wires, bands or like items. The item may form part of a FAIRLEAD, ROLLER or FAIRLEAD, ROLLER AND SHEAVE or may be used as a separate item Excludes PULLEY, FLAT; PULLEY, GROOVE and PULLEY, CONE.
- What is a Vehicular Components Bracket Parts Kit? 32 Items
- A Vehicular Components Bracket Parts Kit (PARTS KIT,BRACKET,VEHICULAR COMPONENTS) is a parts kit used for the repair or replacement of the worn or damaged parts of a BRACKET, VEHICULAR COMPONENTS.
- What is a Vehicular Components Cover? 331 Items
- A Vehicular Components Cover (COVER,VEHICULAR COMPONENTS) is a usually flexible item designed to partly or completely cover vehicle components, vehicle attachments or vehicles and to protect them mainly against weather elements and dirt. It is generally adapted to the external dimensions of the item to be covered. Excludes TARPAULIN.
- What is a Vehicular Small Arms Bracket? 114 Items
- A Vehicular Small Arms Bracket (BRACKET,SMALL ARMS,VEHICULAR) is an item which retains a rifle, shotgun or the like in a vehicular cab, body or turret. It may be a component of a rack or cabinet. The weapon must be removed from its stowed position prior to usage. Excludes BRACKET (1), MOUNTING.
- What is a Winch Drum? 16 Items
- A Winch Drum (DRUM,WINCH) is a cylindrical item which accommodates and secures, on the periphery, a rope, line, chain, or the like, and is used on a WINCH, DRUM POWER OPERATED or WINCH, DRUM, HAND OPERATED. Excludes DRUM, WINCH, AIRCRAFT.
- What is a Vehicle Mounted Cable Cutter? 14 Items
- A Vehicle Mounted Cable Cutter (CUTTER,CABLE,VEHICLE MOUNTED) is a device specifically designed and mounted on the vehicle with various cutting blades to sever cables (wire rope) of the TIEDOWN, GUYWIRE, CONSTRUCTION type and the like. See also CUTTER, CABLE, AIRCRAFT MOUNTED.
- What is an Automotive Trim Bezel? 27 Items
- An Automotive Trim Bezel (BEZEL,AUTOMOTIVE TRIM) is a preformed shape of nonmetallic material and/or metal specifically designed to add a cosmetic appearance around a headlight, door lock, tailight, instrument cluster,, and the like. Excludes MOLDING, METAL; BEZEL, INSTRUMENT MOUNTING.
- What is a Vehicular Components Filler Neck? 98 Items
- A Vehicular Components Filler Neck (FILLER NECK,VEHICULAR COMPONENTS) is a metallic tubular item specificlly designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to an engine crankcase, radiator, fuel tank, transmission housing, and the like. It may have means for overflow. For items which do not accommodate a BREATHER or CAP, see TUBE, PIPE or HOSE (as modified).
- What is a Branched Wiring Harness? 116 Items
- A Branched Wiring Harness (WIRING HARNESS,BRANCHED) is an item conforming to the definition of WIRING HARNESS with branches (forks). See also CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, BRANCHED, Excludes LEAD ASSEMBLY, ELECTRICAL; and LEAD, TEST.
- What is a Vehicular Cable And Conduit Assembly? 22 Items
- A Vehicular Cable And Conduit Assembly (CABLE AND CONDUIT ASSEMBLY,VEHICULAR) is an item designed for brake, clutch, gear change or other function in motorcycles, automobiles, trucks, heavy duty construction equipment or recreation vehicles. The item consists of two or more strands of wire or wire rope, laid or twisted together within a flexible conduit. It may be insulated with an outside wrapping to resist corrosion, be furnished with clip(s), cable guide(s), pin(s), spring(s), or the like and fitted with end fittings which may be threaded, loop, button, or eye. Excludes CONTROL ASSEMBLY, PUSH-PULL.
- What is a Vehicular Equipment Components Installation Kit? 42 Items
- A Vehicular Equipment Components Installation Kit (INSTALLATION KIT,VEHICULAR EQUIPMENT COMPONENTS) is a collection of small parts, necessary for the installation of vehicular components. It may include items such as hoses, gaskets, clamps, bolts, instruction sheets, and the like. Does not apply to parts kits used for repair.
- What is a Vehicular Step Assembly? 16 Items
- A Vehicular Step Assembly (STEP ASSEMBLY,VEHICULAR) is a single item designed to be mounted on the exterior of a vehicle for ascending or descending.
Stock Items From Supply Class 2590 Page 1 of 122
- AS35386
- RNCC: 3 | RNVC: 2 | DAC: 2
- T8781
- RNCC: 3 | RNVC: 2 | DAC: 2
- FV2260069
- RNCC: 3 | RNVC: 2 | DAC: 2
- CV173482A
- RNCC: 5 | RNVC: 2 | DAC: 4
- FV 2126244
- RNCC: 5 | RNVC: 2 | DAC: 2
- QQ/369942/FOS/RCS
- RNCC: 3 | RNVC: 2 | DAC: 4
- 886410M1
- RNCC: 5 | RNVC: 2 | DAC: 2
- 4850177-9
- RNCC: 3 | RNVC: 2 | DAC: 4
- 332/C4718
- RNCC: 3 | RNVC: 2 | DAC: 2
- FV 2207432
- RNCC: 3 | RNVC: 2 | DAC: 2
- 332/F9791
- RNCC: 3 | RNVC: 2 | DAC: 2
- 332/F1142
- RNCC: 3 | RNVC: 2 | DAC: 2