What is Federal Supply Class 2590?

FSC 2590 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 2590) in the USA for supply items codified in the category of Miscellaneous Vehicular Components.

What is NATO Supply Classification Class 2590?

NSC 2590 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 2590 in the USA) for supply items codified in the category of Miscellaneous Vehicular Components.

Which Federal Supply Group is FSC 2590 in?

FSC 2590 is in Federal Supply Group (FSG) 25 which contains Vehicular Equipment Components.

Which NATO Supply Classification Group is NSC 2590 in?

NSC 2590is in NATO Supply Classification Group (NSG) 25 which contains Vehicular Equipment Components.

What is a Metal Molding?

A Metal Molding (MOLDING,METAL) is a shaped piece of metal having a plane or curved surface, either sunk or projecting, used for ornamental or other application.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Hydraulic System Oil Tank?

A Hydraulic System Oil Tank (TANK,OIL,HYDRAULIC SYSTEM) is a fully inclosed tank used to hold the reserve hydraulic oil in hydraulic systems. It must have an opening for manual filling. Excludes hydraulic cylinders, TANK, PRESSURE and TANK, HYDRAULIC FLUID, AIRCRAFT.

What is a Cushioning Pad?

A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.

What is a Linear Actuating Cylinder Assembly Parts Kit?

A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.

What is a Filler Opening Cap?

A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).

What is a Vehicular Components Bracket?

A Vehicular Components Bracket (BRACKET,VEHICULAR COMPONENTS) is a rigid item designed to suspend, support, retain and/or position vehicular component and/or attachment items. Do not use if a more specific item name exists.

What is a Spare Tire Retainer?

A Spare Tire Retainer (RETAINER,SPARE TIRE) is an item/items, which may contain winching capabilities, designed to position and/or restrain movement of a WHEEL, PNEUMATIC TIRE.

What is a Vehicular Components Bracket Parts Kit?

A Vehicular Components Bracket Parts Kit (PARTS KIT,BRACKET,VEHICULAR COMPONENTS) is a parts kit used for the repair or replacement of the worn or damaged parts of a BRACKET, VEHICULAR COMPONENTS.

What is a Vehicular Components Cover?

A Vehicular Components Cover (COVER,VEHICULAR COMPONENTS) is a usually flexible item designed to partly or completely cover vehicle components, vehicle attachments or vehicles and to protect them mainly against weather elements and dirt. It is generally adapted to the external dimensions of the item to be covered. Excludes TARPAULIN.

What is an Automotive Trim Bezel?

An Automotive Trim Bezel (BEZEL,AUTOMOTIVE TRIM) is a preformed shape of nonmetallic material and/or metal specifically designed to add a cosmetic appearance around a headlight, door lock, tailight, instrument cluster,, and the like. Excludes MOLDING, METAL; BEZEL, INSTRUMENT MOUNTING.

What is a Vehicular Components Filler Neck?

A Vehicular Components Filler Neck (FILLER NECK,VEHICULAR COMPONENTS) is a metallic tubular item specificlly designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to an engine crankcase, radiator, fuel tank, transmission housing, and the like. It may have means for overflow. For items which do not accommodate a BREATHER or CAP, see TUBE, PIPE or HOSE (as modified).

Miscellaneous Vehicular Components - Malaysia (MY)

Federal Supply Class (FSC): 2590

NATO Supply Classification Class (NSC): 2590

Federal Supply Group (FSG): 25 Vehicular Equipment Components

NATO Supply Classification Group (NSG): 25 Vehicular Equipment Components

Items Managed by Malaysia (MY) - NCB is 34

Page 2 of 2

NSN Format for Miscellaneous Vehicular Components
Codified by Malaysia

25	90	34	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 2590 is a classification for Miscellaneous Vehicular Components within NATO Supply Group 25, which is dedicated to Vehicular Equipment Components.

This supply class includes a wide range of components that are used in various types of vehicles. These components are essential for the proper functioning and maintenance of vehicles in military operations.

Some examples of the miscellaneous vehicular components included in this supply class are:

1. Brakes: This includes brake pads, brake drums, brake calipers, and other related components that are crucial for the vehicle's braking system.

2. Suspension Systems: This includes shock absorbers, springs, and other components that help in maintaining the stability and smoothness of the vehicle's ride.

3. Fuel Systems: This includes fuel pumps, fuel filters, fuel tanks, and other components that are responsible for the storage and delivery of fuel to the vehicle's engine.

4. Electrical Systems: This includes batteries, alternators, starters, and other electrical components that are necessary for the vehicle's electrical system to function properly.

5. Cooling Systems: This includes radiators, water pumps, and other components that help in regulating the temperature of the vehicle's engine.

6. Exhaust Systems: This includes mufflers, exhaust pipes, and other components that are responsible for the proper discharge of exhaust gases from the vehicle's engine.

7. Steering Systems: This includes steering racks, tie rods, and other components that enable the driver to control the direction of the vehicle.

These are just a few examples of the miscellaneous vehicular components included in NATO Supply Class 2590. The class encompasses a wide range of components that are essential for the operation and maintenance of military vehicles.

FSC 2590 Miscellaneous Vehicular Components - Malaysia (MY)

Includes Attachments for Tanks, Self-propelled Weapons, and High Speed Tractors; A-frames and Winches specifically designed for truck mounting; Cranes and Crane Booms for Wrecker Trucks.

Note-The term "vehicular" as delimited for group 25, is applicable to those vehicles and tractors included in groups 23 and 24, construction vehicles included in group 38, and warehouse trucks, tractors, and trailers included in group 39. It does not apply to railway vehicles (group 22), aircraft (group 15), or watercraft (group 19). An item of supply which is a "vehicular" component, within the scope delimited above, is classified in this group regardless of whether it has additional applications on vehicles outside the delimitations for this group.

Frequently Asked Questions(FAQ) for Federal Supply Class 2590

What is Federal Supply Class 2590?: FSC 2590 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 2590) in the USA for supply items codified in the category of Miscellaneous Vehicular Components.
What is NATO Supply Classification Class 2590?: NSC 2590 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 2590 in the USA) for supply items codified in the category of Miscellaneous Vehicular Components.
Which Federal Supply Group is FSC 2590 in?: FSC 2590 is in Federal Supply Group (FSG) 25 which contains Vehicular Equipment Components.
Which NATO Supply Classification Group is NSC 2590 in?: NSC 2590 is in NATO Supply Classification Group (NSG) 25 which contains Vehicular Equipment Components.

Supply Items Included in Federal Supply Class 2590

What is a Metal Molding? 59 Items: A Metal Molding (MOLDING,METAL) is a shaped piece of metal having a plane or curved surface, either sunk or projecting, used for ornamental or other application.
What is a Push-Pull Control Assembly? 125 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Hydraulic System Oil Tank? 18 Items: A Hydraulic System Oil Tank (TANK,OIL,HYDRAULIC SYSTEM) is a fully inclosed tank used to hold the reserve hydraulic oil in hydraulic systems. It must have an opening for manual filling. Excludes hydraulic cylinders, TANK, PRESSURE and TANK, HYDRAULIC FLUID, AIRCRAFT.
What is a Cushioning Pad? 191 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Linear Actuating Cylinder Assembly Parts Kit? 12 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Filler Opening Cap? 42 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Vehicular Components Bracket? 37 Items: A Vehicular Components Bracket (BRACKET,VEHICULAR COMPONENTS) is a rigid item designed to suspend, support, retain and/or position vehicular component and/or attachment items. Do not use if a more specific item name exists.
What is a Spare Tire Retainer? 11 Items: A Spare Tire Retainer (RETAINER,SPARE TIRE) is an item/items, which may contain winching capabilities, designed to position and/or restrain movement of a WHEEL, PNEUMATIC TIRE.
What is a Vehicular Components Bracket Parts Kit? 16 Items: A Vehicular Components Bracket Parts Kit (PARTS KIT,BRACKET,VEHICULAR COMPONENTS) is a parts kit used for the repair or replacement of the worn or damaged parts of a BRACKET, VEHICULAR COMPONENTS.
What is a Vehicular Components Cover? 10 Items: A Vehicular Components Cover (COVER,VEHICULAR COMPONENTS) is a usually flexible item designed to partly or completely cover vehicle components, vehicle attachments or vehicles and to protect them mainly against weather elements and dirt. It is generally adapted to the external dimensions of the item to be covered. Excludes TARPAULIN.
What is an Automotive Trim Bezel? 39 Items: An Automotive Trim Bezel (BEZEL,AUTOMOTIVE TRIM) is a preformed shape of nonmetallic material and/or metal specifically designed to add a cosmetic appearance around a headlight, door lock, tailight, instrument cluster,, and the like. Excludes MOLDING, METAL; BEZEL, INSTRUMENT MOUNTING.
What is a Vehicular Components Filler Neck? 24 Items: A Vehicular Components Filler Neck (FILLER NECK,VEHICULAR COMPONENTS) is a metallic tubular item specificlly designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to an engine crankcase, radiator, fuel tank, transmission housing, and the like. It may have means for overflow. For items which do not accommodate a BREATHER or CAP, see TUBE, PIPE or HOSE (as modified).