2590-14-351-6221

6150-14-456-8166 6150144568166 144568166 is a lead electrical; or lead assembly, electrical; inclosed in a separate conduit, metal, flexible; conduit, metal, rigid; conduit, nonmetallic, rigid; conduit assembly, metal, flexible; conduit assembly, metal, rigid; or conduit assembly, nonmetallic, electrical. excludes items fabricated from cable, power, electrical; and cable, special purpose, electrical; which have integral shields or metallic covering, and line,radio frequency transmission. see also cable and conduit assembly, electrical.

480-8949 Electrical Lead And Conduit Assembly 009067222PRNCC: 3 | RNVC: 2 | DAC: 1 11 Apr 1996 2590-14-351-6221

Wichita 6. 70898 Beechcraft Corporation, Dba Textron Aviation is a Succeeded(Merged) Manufacturer with
the Cage Code 70898 and is tracked by Dun & Bradstreet under DUNS Number 007482011.
What is CAGE Code 70898?

5310-99-617-7696 5310996177696 996177696 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-14-543-0632 5310145430632 145430632 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.