2590-12-387-3805

2920-33-154-0747 2920331540747 331540747 is an item of rigid construction designed to be firmly attached at one end and slotted at the other end. it is used to facilitate tension adjustment of the drive belt on automotive type generators or other belt driven accessories.

5365-01-154-0747 5365011540747 011540747 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

2510-15-154-0747 2510151540747 151540747 INSULATION PANEL, V

4110-66-154-0747 4110661540747 661540747 is an insulated upright cabinet/enclosure with single or multiple storage compartments. it is intended for storage and preservation of fresh foods, vegetables, and the like. for refrigerator with a freezer compartment - see refrigerator-freezer, mechanical, food. also excludes display case, mechanically refrigerated; freezer, mechanical, food; refrigeration unit, mechanical; refrigerator, prefabricated.

5905-12-154-0747 5905121540747 121540747 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. excludes suppressor, ignition interference.