2590-12-372-0166

2007 3950-12-372-1769 Tromm Gehaeuseteil 1.236.29.01.04RNCC: 5 | RNVC: 2 | DAC: 3 25 Jun 2007 2590-12-372-0166

: 3 9 Jun 2006 2030-98-204-9689 Winch Drum 1/3 ITEM 18RNCC: 3 | RNVC: 2 | DAC: 1 10 Dec 1997 2590-12-372-0166

6640-01-608-9062 6640016089062 016089062 is an item designed for holding samples of biological cultures in laboratory and clinical procedures. may include applicator(s) and cap which has socket for applicator(s). excludes tube, specimen.

3040-22-608-9062 3040226089062 226089062 is an assembly which consists of a shaft, shouldered and components such as couplings, flanges, and the like. the shaft and components are usually welded together.

5310-00-608-9062 5310006089062 006089062 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.