2590-12-321-3815

2520-12-146-2511 2520121462511 121462511 is a gear, cylindrical in form, with spiral teeth designed to mesh with the thread forms of a gear (1), worm. see also gear, antibacklash, worm wheel.

5305-00-146-2511 5305001462511 001462511 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.

8430-15-146-2511 8430151462511 151462511 SCARPONCINI INVERN.

1560-99-146-2511 1560991462511 991462511 GUSSET

4810-25-146-2511 4810251462511 251462511 is a valve having two or more ports with valve stem or pilot needle in a normally open or closed position. it is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. the valve may be equipped with a manual opening or closing device. for items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. it may be inline or cartridge (manifold) design. excludes valve (1), butterfly.