2540-14-518-7941

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Ring Drawbar Coupler (INC 19449) Feb 1983 2540-14-518-7941

5310-01-670-4007 5310016704007 016704007 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

2840-00-670-4007 2840006704007 006704007

1969 2540-99-965-5724 Ring Drawbar Coupler R0FN8227-35RNCC: 5 | RNVC: 2 | DAC: 2 18 Feb 1983 2540-14-518-7941

Vehicular Axle 90-107RNCC: 3 | RNVC: 2 | DAC: 46610006RNCC: 5 | RNVC: 2 | DAC: 4 19 Mar 1979 2540-14-518-7941