2540-14-234-7959

5 1 Jan 1969 2510-14-223-7443 Soubassement De Cab 92301RNCC: 5 | RNVC: 9 | DAC: 6 1 Jan 1966 2540-14-234-7959

5310-01-459-1376 5310014591376 014591376 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-17-124-1575 5310171241575 171241575 is a nut having a flat bottom and 6 sides. an integral feature is incorporated for locking on the threads of a mating member. excludes nut (1), self-locking, cap.

5306-99-362-1801 5306993621801 993621801 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.