2540-22-123-6872
Rearview Mirror Arm
2540221236872 221236872 0302581
An arm mounted on the outside or inside of a vehicle and designed as mounting fixture for a mirror. It may be adjustable. View more Rearview Mirror Arm
Managed by Denmark
NSN Created on 5 Mar 1996
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 2540-22-123-6872
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 2540-22-123-6872 5+ Documents (More...)
https//www.nsnlookup.com /nato/nato-stock-numbers/inc Rearview Mirror Arm (INC 10091) 7 Feb 2000 2540-22-123-6872
7640-27-030-2581 7640270302581 270302581 is a sheet or plate representing on a plain surface all or part of earth's surface, showing physical, natural, statistical and/or political features, or division. excludes chart; chart, recording instrument; plate, instruction; and sheet, technical.
5310-34-030-2581 5310340302581 340302581 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
3040-01-030-2581 3040010302581 010302581 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
6940-00-030-2581 6940000302581 000302581
Restrictions 2540-22-123-6872
End Users 2540-22-123-6872
- Denmark (ZS)
Approved Sources 2540-22-123-6872
- Part Number
- Manufacturer
- Status
- 0302581
- Manufacturer
- S3002 - General Dynamics European, (Active)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 2540-22-123-6872
2540-14-495-8267 2540-14-505-0471 2540-21-908-4948 2540-12-145-7297 2540-14-435-6864 2540-99-894-8914 2540-14-311-3494 2540-99-819-8224 2540-14-432-6320 2540-14-307-0981 2540-14-312-9771 2540-12-375-8301 2540-99-808-3837 2540-99-154-5635 2540-12-364-5476 2540-14-372-1061 2540-14-365-6931 2540-14-380-0579