2540-12-369-5483

Norway (NO) | DAC: 5 6 Sep 1999 5836-25-150-3663 https//www.nsnlookup.com /fsg-25/fsc-2540/de 2540-12-369-5483
Control Pedal 2540123695483 123695483,1503663 Documents 2540-12-369-5483 4+ Documents ( More...

5310-00-150-3663 5310001503663 001503663 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1075-12-150-3663 1075121503663 121503663 STECKBAUGRUPPE,LEIS

1560-99-150-3663 1560991503663 991503663

3030-01-150-3663 3030011503663 011503663 is a flat internally toothed belt or a round belt with protuding pins, designed to engage with corresponding teeth or corresponding grooves on the sprockets over which they run.