2540-12-340-3988

browser . 2540-22-124-4113Door Wedge Receptacle2540221244113 221244113 Cancelled - Replaced by NSN 2540-12-340-3988

2006 2540-12-198-9889 Door Wedge Receptacle 3147230204RNCC: 3 | RNVC: 2 | DAC: 1 20 Mar 1984 2540-12-340-3988

1650-00-600-0500 1650006000500 006000500

3610-22-600-0500 3610226000500 226000500 is a machine which utilizes a light source to expose an intermediate (light-sensitive) paper with an original creating a latent image. the intermediate paper and a coated copy paper are pressed together and heat is applied. the heat transfers the latent image to the coated copy paper. most all colors can be copied. up to 25 copies of one original can be made.

5365-01-600-0500 5365016000500 016000500 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.