2540-12-312-3571

Documents 6550-66-140-6571 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-25/fsc-2540/de 2540-12-312-3571
Vehicular Bumper Section 2540123123571 251406571 5305-25-140-6571 5305251406571 251406571 https

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Vehicular Bumper Section (INC 48471) 2003 2540-12-312-3571

5305-25-140-6571 5305251406571 251406571

7640-15-140-6571 7640151406571 151406571 CARTA TOPOGRAFICA G

5365-01-140-6571 5365011406571 011406571 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.