2540-12-125-1624

DAC: 6 30 May 1969 5940-12-120-8062 Lug Terminal 3509928RNCC: 5 | RNVC: 2 | DAC: 6 30 May 1969 2540-12-125-1624

5820-15-212-5410 5820152125410 152125410 CUSTODIA TETTUCCIO

2920-14-380-4910 2920143804910 143804910 is a regulator designed to automatically maintain the current and/or voltage output of an engine generator within specified limits, regardless of variation of load or input voltages. may include cutout relay. does not include items in which regulation is accomplished by transformer action. see also regulator, current and regulator, voltage.

5365-01-603-0198 5365016030198 016030198 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

4310-00-212-5410 4310002125410 002125410