2530-01-298-3772

Rotor 9C8745RNCC: 3 | RNVC: 2 | DAC: E 10 May 2006 1630-01-332-2378 Disc Brake Rotor 8 Jan 1991 2530-01-298-3772

1988 2590-01-174-1422 Push-Pull Control Assembly C1031RNCC: 5 | RNVC: 2 | DAC: 6 14 Mar 1984 2530-01-298-3772

your web browser . 5330-99-548-9532Toroid Sealing Ring5330995489532 995489532 BS1806-014 JW141194-32 141194
BS1806-014 K7766 - Bsi Standards Limited (Active) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 2 141194

5365-99-865-2296 5365998652296 998652296 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

1420-00-969-2527 1420009692527 009692527 FASTENER