Premium Information is available for this item - Upgrade for $1 a day
2530-00-884-0616
Brake Chamber Diaphragm
2530008840616 008840616 3A10080 246675 242020
An item of flexible, nonmetallic construction, designed to convert air pressure or vacuum into mechanical force when installed in a brake chamber. View more Brake Chamber Diaphragm
Managed by United States
NSN Created on 17 Nov 1967
Data Last Changed
May 2023
May 2023
NATO Update Count
6
6
NATO Data Quality
Marketplace 2530-00-884-0616
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 2530-00-884-0616 5+ Documents (More...)
9 Aug 1967 3110-00-555-5217 Annular Ball Bearing 24WB66RNCC: 5 | RNVC: 9 | DAC: 5 1 Jan 1963 2530-00-884-0616
6150-12-329-3192 6150123293192 123293192 is a definite continuous length of cable, special purpose, electrical, having one or more ends processed or terminated in fittings which provide for connection to other items. excludes items having branches or forks. excludes lead, test and cable and conduit assembly, electrical.
2530-00-891-5993 Brake Chamber Diaphragm 2510640-ITEM 27RNCC: C | RNVC: 1 | DAC: 6 18 Jan 1967 2530-00-884-0616
how to enable JavaScript in your web browser . 1420-99-447-5006Aircraft Skin1420994475006 994475006 246675
5310-00-628-3896 5310006283896 006283896 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 2530-00-884-0616
2530-00-884-0616 is a Brake Chamber Diaphragm that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 2530-00-884-0616
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2530-00-884-0616
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Air Force (FGGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FGAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHD
- Turkey (ZW01)
- Effective Date:
- 1 Apr 2002
Approved Sources 2530-00-884-0616
- Part Number
- Manufacturer
- Status
- 246675
- Manufacturer
- 06853 - Bendix Commercial Vehicle Systems (Active)
- Primary Buy
- Primary Buy
- 242020
- 06853 - Bendix Commercial Vehicle Systems (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 246675
- 03054 - Boston Pneumatics Inc (Obsolete)
- Advisory Reference
- Advisory Reference
- 3A10080
- 22888 - Fmc Corp (Active)
- Advisory Reference
- Advisory Reference
- 3A10080
- 2Y614 - Link-Belt Cranes, L.P., Lllp (Active)
- Advisory Reference
- Advisory Reference
Datasheet 2530-00-884-0616
- Characteristic
- Specifications
- FIIG
- Specifications
- T129-R
- Construction [ARQS]
- Fabric Insert
- Diaphragm Type [AZEN]
- Beaded Angular Recessed
- Environmental Protection [ADZC]
- Moisture Resistant Or Oil Resistant
- Material Thickness [ABPX]
- 0.110 Inches Minimum And 0.150 Inches Maximum
- Mounting Method [AXGY]
- Bead
- Fsc Application Data [ZZZV]
- Chamber,Air Brake,Vehicular
- Material [MATT]
- Rubber
- Overall Depth [ABFY]
- 1.697 Inches Minimum And 1.933 Inches Maximum
- Overall Outside Diameter [ADGA]
- 6.822 Inches Minimum And 7.078 Inches Maximum
DLA Procurement Analysis 2530-00-884-0616
Management Data 2530-00-884-0616
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 2530-00-884-0616
2530-27-059-1427 2530-27-022-5377 2530-12-379-5235 2530-33-107-1273 2530-27-040-4443 2530-12-315-1223 2530-25-160-5687 2530-66-152-8402 2530-27-039-6823 2530-99-827-9887 2530-00-115-8912 2530-00-038-4444 2530-01-099-3570 2530-00-910-3942 2530-00-881-8822 2530-00-862-0094 2530-01-158-3105 2530-01-115-4963
Freight Information 2530-00-884-0616
2530-00-884-0616 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 018400. A Sub NMFC of X. It has a NMFC Description of AUTO BRAKES/SHOES R PADS ETC. 2530-00-884-0616 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 08480 which rates the freight between FCL and LCL. 2530-00-884-0616 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 581 for ocean manifesting and military sealift. 2530-00-884-0616 is not classified as a special type of cargo when transported by water. 2530-00-884-0616 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 2530-00-884-0616
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 2530-00-884-0616 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: