Premium Information is available for this item - Upgrade for $1 a day
2530-00-471-0010
Steering Knuckle Kingpin
2530004710010 004710010 6-X-68 6-809
A hardened metal pin, with or without a head designed to provide articulation between a stub axle and an axle-beam or a steering head to permit vehicular steering. It may be grooved, slotted, or threaded, to accommodate a locking device and may have lubrication facilities. Excludes PIN, STRAIGHT, HEADLESS; PIN, STRAIGHT, HEADED; PIN, GROOVED, HEADLESS; PIN, GROOVED, HEADED; and PIN, TAPERED, THREADED. View more Wheel Spindle Kingpin
May 2023
8
Marketplace 2530-00-471-0010
Request a Quotation from participating marketplace vendors
Related Documents 2530-00-471-0010 1+ Documents (More...)
/fsg-25/fsc-2530/us
RQST NE Updated Every Day 2530-00-471-0010 RQST Updated Every Day 2530-00-471-0010 RQST NE Related
Documents 2530-00-471-0010 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-25/fsc-2530/us 2530
Restrictions 2530-00-471-0010
2530-00-471-0010 is a Steering Knuckle Kingpin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 2530-00-471-0010
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2530-00-471-0010
- US Air Force (FGGC)
- Effective Date:
- 1 Sep 2005
- Poland (WP)
- Poland (WP01)
- Effective Date:
- 1 Sep 2006
- United States of America (ZZ)
Approved Sources 2530-00-471-0010
- Part Number
- Manufacturer
- Status
- 6-X-68
- Manufacturer
- 0W357 - Pdi Ground Support Systems, Inc. (Active)
- Primary Buy
- Primary Buy
- 6-809
- 0W357 - Pdi Ground Support Systems, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 2530-00-471-0010
- Characteristic
- Specifications
- FIIG
- Specifications
- T307-N
- Distance From Nearest End To Groove/Slot Center [CFDG]
- 2.625 Inches Nominal
- Casehardening Indicator [AASG]
- Not Casehardened
- Depth [AEJZ]
- 0.125 Inches Nominal
- Diameter [ABMZ]
- 0.863 Inches Minimum And 0.864 Inches Maximum
- Material [MATT]
- Steel
- Length [ABRY]
- 5.250 Inches Nominal
- Lubrication Groove Type [CFDM]
- Straight
- Lubrication Fitting Threaded Hole [CFDL]
- Not Included
- Retaining Device Type [AGEZ]
- Lockpin Slot
- Screwdriver Slotted End [CFDK]
- Not Included
- Special Features [FEAT]
- W/Special Grease Grooves
- Width [ABGL]
- 0.187 Inches Nominal
- Threaded Securing End [CFDJ]
- Not Included
Weapon Systems (WSDC) 2530-00-471-0010
DLA Procurement Analysis 2530-00-471-0010
Management Data 2530-00-471-0010
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 2530-00-471-0010
Freight Information 2530-00-471-0010
2530-00-471-0010 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 018920. A Sub NMFC of X. It has a NMFC Description of AUTO KINGBOLTS/KINGPINS. 2530-00-471-0010 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 08800 which rates the freight between FCL and LCL. 2530-00-471-0010 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 581 for ocean manifesting and military sealift. 2530-00-471-0010 is not classified as a special type of cargo when transported by water. 2530-00-471-0010 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 2530-00-471-0010 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: