2530-27-050-2631

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Vehicular Front Axle Link (INC 39108) 1990 2530-27-050-2631

2530-14-442-8119 Vehicular Front Axle Link 052-018-00-06RNCC: 3 | RNVC: 2 | DAC: 4 6 Nov 1990 2530-27-050-2631

5975-01-651-9904 5975016519904 016519904 is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. it may include wires, cables, terminal boards, connectors, etc., required for equipment operation. for items designed to accommodate equipment mounted on panels, see rack, electrical equipment. see also case (2) (as modified). excludes interconnecting box; interconnecting cabinet; junction box; and terminal box.

5935-14-340-4915 5935143404915 143404915 is an electrical fitting with a female contact arranged for the insertion of a plug, tip or a tip, test prod. it has a single facility for attachment of a conductor or facility for circuit connection through its mounting provisions. the item may or may not be insulated. excludes multisection types each section of which consists of a single contact spring or telephone-type jack. excludes connector, receptacle electrical; jack, telephone; jack assembly, tip; and post, binding.

5310-00-186-0109 5310001860109 001860109 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.